Search results

This study aims to provide an alternative adoption to overcome the energy crisis and environmental effluence by comparative theoretical and trial testing analysis of an innovative combined condenser unit over traditional individual condenser unit water heating systems.

The presented innovative new unit of the combined condenser heat pipe works efficiently through its improved idea and unique design, providing uniform heating to improve the heat transfer and, finally, the temperature of water increases without enhancing the cost. In this design, all these five evaporator units were connected with a single combined condenser unit in such a manner that after the condensation of heat transfer fluid vapour, it goes equally into the evaporator pipe.

The maximum temperature of hot water obtained from the combined condenser heating system was 60.6, 55.5 and 50.3°C at a water flow rate of 0.001, 0.002 and 0.003 kg/s, respectively. The first and second law thermodynamic efficiency of the combined condenser heating system were 55.4%, 60.5% and 89.0% and 2.6%, 3.7% and 4.1% at 0.001, 0.002 and 0.003 kg/s of water flow rates, respectively. The combined condenser heat pipe solar evacuated tube heating system promoting progressive performance is considered efficient and environment-friendly compared to the traditional condenser unit water heating system.

Innovative combined condenser heat pipe evacuated tube collector assembly was designed and developed for the study. A comparative theoretical and experimental energy-exergy performance analysis was performed of innovated collective condenser and traditional individual condenser heat pipe water heating system at various mass flow rate.

Knowledge transfer which refers to the communication of knowledge from a source so that it is learned and applied by a recipient has long been a challenge for knowledge management. The purpose of this study is to understand influencing factors of transactive memory system (TMS) and knowledge transfer.

Drawing on the theories of communication visibility, social distance and flow, this study develops a research model. Then, data are collected from users of the social media mobile App. Partial least squares-structural equation modeling (PLS-SEM) is employed to analyze data.

TMS is a valid second-order construct in the social media mobile app context, which is more reflected by credibility. Meanwhile, communication visibility and social distance each have positive effects on TMS which further has a positive effect on knowledge transfer. Flow has a positive effect on knowledge transfer.

Developers of the mobile App should carefully consider the role of information and communication technology (ICT) in supporting TMS and knowledge transfer. They should consider recommendation algorithm so that the benefit of communication visibility can be retained. They should design the feature to classify users based on similarity so as to stimulate users' feeling of close social distance. They should keep on improving features based on users' holistic experience.

This study incorporates the perspectives of communication visibility, social distance and flow to understand TMS and knowledge transfer, presenting a new lens for research.

Perspiration and heat are produced by the body and must be eliminated to maintain a stable body temperature. Sweat, heat and air must pass through the fabric to be comfortable. The cloth absorbs sweat and then releases it, allowing the body to chill down. By capillary action, moisture is driven away from fabric pores or sucked out of yarns. Convectional air movement improves sweat drainage, which may aid in body temperature reduction. Clothing reduces the skin's ability to transport heat and moisture to the outside. Excessive moisture makes clothing stick to the skin, whereas excessive heat induces heat stress, making the user uncomfortable. Wet heat loss is significantly more difficult to understand than dry heat loss. The purpose of this study is to provided a good compilation of complete information on wet thermal comfort of textile and technological elements to be consider while constructing protective apparel.

This paper aims to critically review studies on the thermal comfort of textiles in wet conditions and assess the results to guide future research.

Several recent studies focused on wet textiles' impact on comfort. Moisture reduces the fabric's thermal insulation value while also altering its moisture characteristics. Moisture and heat conductivity were linked. Sweat and other factors impact fabric comfort. So, while evaluating a fabric's comfort, consider both external and inside moisture.

The systematic literature review in this research focuses on wet thermal comfort and technological elements to consider while constructing protective apparel.

The purpose of this paper is to investigate the performance of bio-based lubricants (BBL), namely, palm mid-olein (PMO) enriched with an antioxidant agent, tertiary-butylhydroquinone (TBHQ) and a viscosity improver, ethylene-vinyl acetate (EVA), in journal bearing (JB) applications.

Samples of the BBL were prepared by blending it with TBHQ and EVA at various blending ratios. The oxidative stability (OS) and viscosity of the BBL samples were examined using differential scanning calorimetry and a viscometer, respectively. Meanwhile, their performance in JB applications was evaluated through the use of a JB test rig with a 0.5 length-to-diameter ratio at various operating conditions.

It was found that the combination of PMO + TBHQ + EVA demonstrated a superior oil film pressure and load-carrying capacity, resulting in a reduced friction coefficient and a smaller attitude angle compared to the use of only PMO or VG68. However, it was observed that the addition of TBHQ and EVA to the PMO did not have a significant impact on the minimum oil film thickness.

The results would be quite useful for researchers generally and designers of bearings in particular.

This study used PMO as the base stock, and its compatibility with TBHQ and EVA was investigated in terms of its OS and viscosity. The performance of this treated BBL was evaluated in a hydrodynamic JB.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2023-0363/

This study aims to map and assess the conceptual development of the innovation ecosystem literature.

A bibliometric analysis was performed using the VOSviewer, RStudio software, Bibliometrix and Biblioshiny packages. To accomplish this, 367 publications published between 2006 and 2020 and indexed in the Web of Science and Scopus databases were assessed.

The results demonstrate a rise in research during 2016, with almost 30% of publications concentrated in only six journals. The co-citation analysis presented four clusters: case studies, business and innovation ecosystems (platform approach), open innovation and national and regional innovation systems (territorial approach). We proposed a theoretical framework based on two approaches in the innovation ecosystem literature based on co-citation analysis: platform, which has its roots in the literature on strategy, and territory, grounded in research on economic geography literature.

One of the limitations of the study is that only articles published in journals were analyzed, leaving out of the sample those published in congresses, books and other sources.

This paper contributes to the literature by presenting and clarifying the different conceptual trajectories of research in innovation ecosystems. We also proposed an analytical framework based on the two main approaches to innovation ecosystems – platform and territory. This framework presents the critical elements of managing innovation ecosystems from both perspectives.

The purpose of this study is to examine how well reinforced concrete structures can be shielded against concrete carbonation using anti-carbonation coatings based on synthetic polymer.

Applying free radical polymerization, an acrylate terpolymer emulsion that a surfactant had stabilized was created. A thermogravimetric analysis, minimum film-forming temperature, Fourier transform infrared spectroscopy and particle size distribution are used to characterize the prepared eco-friendly water base acrylate terpolymer emulsion. Using three different percentages of the acrylate terpolymer emulsion produced, 35%, 45% and 55%, the anti-carbonation coating was formed. Tensile strength, tensile strain, elongation, crack-bridging ability, carbon dioxide permeability, chloride ion diffusion, average pull-off adhesion strength, water vapor transmission, gloss, wet scrub resistance, QUV/weathering and storage stability are the characteristics of the anti-carbonation coating.

The formulated acrylate terpolymer emulsion enhances anti-carbonation coating performance in CO₂ permeability, Cl-diffusion, crack bridging, pull-off adhesion strength and water vapor transmission. The formed coating based on the formulated acrylate terpolymer emulsion performed better than its commercial counterpart.

To protect the steel embedded in concrete from corrosion and increase the life span of concrete, the surface of cement is treated with an anti-carbonation coating based on synthetic acrylate terpolymer emulsion.

In addition to saving lives from building collapse, it maintains the infrastructure for the long run.

The anti-carbonation coating, which is based on the synthetic acrylate terpolymer emulsion, is environmentally benign and stops the entry of carbon dioxide and chlorides, which are the main causes of steel corrosion in concrete.

This study aims to comprehensively analyse the implementation and effectiveness of corporate social responsibility (CSR) policies within the context of the Indian coal mining sector. Furthermore, it investigates the alignment between CSR initiatives and the unique challenges faced by the coal mining sector and examines the outcomes and impacts of these initiatives on the employees of the sector and their perspective on the situation.

This study adopts a comprehensive qualitative research method, including a review of the literature, case studies and stakeholder interviews. This study seeks to deconstruct the application of CSR policies.

The analysis developed a deeper understanding of the complexities surrounding CSR policies in the Indian coal mining sector, offering insights into strategies for enhancing the effectiveness and relevance of these initiatives while fostering sustainable development.

This study reveals a rich tapestry of theoretical implications and how they connect to important organisational and societal paradigms. The results of this qualitative analysis can work as a foundation for creating scales to measure the level of efficiency of CSR policies implemented by different companies. Furthermore, this study goes beyond theoretical knowledge and gives companies, regulators and communities information they can use. By looking at how CSR policies work in the real world, a road map for responsible resource extraction and community growth can be made.

The findings are unique in exploring the CSR initiatives and the unique challenges faced by the coal mining sector. This study offers insight on the employees of the sector and their perspectives on the situation and delves into the multifaceted dimensions of CSR practices.

Stemming from the resource-based view (RBV) approach, this article overcomes the limits of the conventional strengths, weaknesses, opportunities and threats (SWOT) analysis, setting the basis for the model actual–potential, positive–negative, internal–external (APPNIE). This paper enacts a new framework demonstrating how strengths, weaknesses, opportunities and threats of SWOT can be replaced by actual or potential, positive or negative elements, considered in a dynamic way.

The traditional SWOT analysis provides only a partial view of the environment and adopts incorrect terminology that can confuse the user, preventing a clear understanding of the factors affecting the organisation’s situation. The authors developed a new tool to help managers in their decision-making processes.

This study proposes a new tool for assessing the quality of management, resources and environment, which is useful in understanding the economic and social scenario in which a firm is embedded. From a practical point of view, the new tool is applied in the case study, and it shows how managers and students can use it while choosing between alternative options (different strategies, markets, technologies, etc.).

The APPNIE model introduces a new dimension that the SWOT analysis does not consider. Moreover, for each element of the new matrix, the authors propose a plan of action, which is another valuable benefit of the APPNIE model.

The purpose of this study is to extract and characterize a novel natural dye from the leaves of Lannea coromandelica and the extraction with finding ways of dyeing cotton fabric using three mordants.

The colouring agents were extracted from the leaves of Lannea coromandelica using an aqueous extraction method. The extract was characterized using analysis methods of pH, gas chromatography-mass spectrometry (GC-MS), Fourier transform infrared (FTIR), ultraviolet-visible (UV-vis) and cyclic voltammetry measurement. The extract was applied to cotton fabric samples using a non-mordant and three mordants under the two mordanting methods. The dyeing performance of the extracted colouring agent was evaluated using colour fastness properties, colour strength (K/S) and colour space (CIE Lab).

The aqueous dye extract showed reddish-brown colour, and its pH was 5.94. The GC-MS analysis revealed that the dye extract from the leaves of Lannea coromandelica contained active chemical compounds. The UV-vis and FTIR analyses found that groups influenced the reddish-brown colour of the dye extraction. The cyclic voltammetry measurements discovered the electrochemical properties of the dye extraction. The mordanted fabric samples showed better colour fastness properties than the non-mordanted fabric sample. The K/S and CIE Lab results indicate that the cotton fabric samples dyed with mordants showed more significant dye affinities than non-mordanted fabric samples.

Researchers have never discovered that the Lannea coromandelica leaf extract is a natural dye for cotton fabric dyeing. The findings of this study showed that natural dyes extracted from Lannea coromandelica leaf could be an efficient colouring agent for use in cotton fabric.

This study focuses on HR practices that foster employee engagement during Covid-19. Companies in transition economies are particularly vulnerable to crisis and downsizing and other recessionary practices are frequently used.

Drawing on the model of caring human resource management, we utilise interviews with human resource representatives of 10 banks in the transition economy of Bosnia and Herzegovina. We analyse the banks at two different times to demonstrate how and why companies adapt their HR practices.

Our findings show a changing mindset in the deployment of highly context-specific HR practices. Strengthening company culture through a sense of community and communication ensure stability and continuity in work. Rather than layoffs, flexible work has become standard.

By highlighting the interplay between HR practices and employee engagement, we contribute to the discussion on engagement in exceptional circumstances and challenging settings and demonstrate how caring responsibilities “migrate” into HR practices in the professional context of a transition economy.

We propose a context-specific “protective caring approach” to foster employee engagement during crises.