Search results

The primary purpose of this research was to expand the knowledge base regarding the behavior of steel columns during exposure to fire. This paper presents the numerical study of the effect of heat on the performance of parking steel column in a seven-story steel building under cyclic loading.

In this research, the forces and deformations developed during a fire are estimated by using detailed 3D finite-element models. The analyses are in the form of a coupled thermo-mechanical analysis in two types of loading: concurrent loading (fire and cyclic loading) and non-concurrent loading (first fire and then cyclically), and the analyses have been conducted in both states of the fire loading with cooling and without cooling using the ABAQUS software. Further, it was investigated whether, during the fire loading, the specimen was protected by a 3-cm-thick concrete coating and how much it changes the seismic performance. After verification of the specimen with the experimental test results, the column model was investigated under different loading conditions.

The result of analyses indicates that the effect of thermal damage on the performance of steel columns, when cooling is happening late, is more than the state in which cooling occurs immediately after the fire. In this paper, thermal–seismic performance of parking steel columns has been specified and the effect of the fire damage has been investigated for the protected steel by concrete coating and to the non-protected steel, under both cooling and non-cooling states.

This study led to recommendations based on the findings and suggestions for additional work to support performance-based fire engineering. It is clear that predicting force and deformation on steel column during fire is complex and it is affected by many variables. Here in this paper, those variables are examined and proper results have been achieved.

Post-earthquake fire (PEF) can lead to a rapid collapse of structures partially damaged by earthquake. As there is almost no established PEF provisions by codes and standards, PEF investigations are therefore needed for those buildings. The paper aims to discuss these issues.

A non-linear PEF analysis comprises three steps, which are the application of gravity loads, earthquake loads and then fire loads. As a fire generally initiates on one floor and then spreads to other floors, applying a sequential fire is more realistic than applying a concurrent fire on several floors. Hence, in this study, the fire is applied sequentially to the floors with a time delay.

The results indicate a substantial reduction in the resistance of the damaged frame when subjected to PEF. In addition, the results of applying the PEF sequentially is more realistic than the concurrent fire.

It was better to perform an experimental test to have a better understanding of the issue.

PEF can potentially result in a catastrophe in areas located in seismic regions. Thus, investigating the effect of PEF on previously damaged structures is of importance.

In the last four years, since Volume I of this Bibliography first appeared, there has been an explosion of literature in all the main functional areas of business. This wealth of material poses problems for the researcher in management studies — and, of course, for the librarian: uncovering what has been written in any one area is not an easy task. This volume aims to help the librarian and the researcher overcome some of the immediate problems of identification of material. It is an annotated bibliography of management, drawing on the wide variety of literature produced by MCB University Press. Over the last four years, MCB University Press has produced an extensive range of books and serial publications covering most of the established and many of the developing areas of management. This volume, in conjunction with Volume I, provides a guide to all the material published so far.

Overview All organisations are, in one sense or another, involved in operations; an activity implying transformation or transfer. The major portion of the body of knowledge concerning operations relates to production in manufacturing industry but, increasingly, similar problems are to be found confronting managers in service industry. It is only in the last decade or so that new technology, involving, in particular, the computer, has encouraged an integrated view to be taken of the total business. This has led to greater recognition being given to the strategic potential of the operations function. In order to provide greater insight into operations a number of classifications have been proposed. One of these, which places operations into categories termed factory, job shop, mass service and professional service, is examined. The elements of operations management are introduced under the headings of product, plant, process, procedures and people.

Aim of the present monograph is the economic analysis of the role of MNEs regarding globalisation and digital economy and in parallel there is a reference and examination of some legal aspects concerning MNEs, cyberspace and e‐commerce as the means of expression of the digital economy. The whole effort of the author is focused on the examination of various aspects of MNEs and their impact upon globalisation and vice versa and how and if we are moving towards a global digital economy.

A major factor to the success of flexible manufacturing systems (FMSs) is their ability to transport work pieces between different workstations. FMS have now become more advanced and material‐handling systems have become progressively more sophisticated, it is not exceptional to have automated steering of tools to workstations as well. Such system design will improve the tool‐handling capability and the system productivity while holding tool cost to a minimum. Tool cost could represent as much as 25 percent of the operating cost. The purpose of this paper is to propose a new colored Petri net (CPN)‐based approach to the design and development of a tool sharing control system that is intended to help use of the proper and minimal number of tools for a manufacturing system.

A new black token timed PN model is first developed, to reduce the complexity of the graphical representation a new CPN model is developed. The new CPN model also allows to find the optimal sequence. The optimal sequence has no effect on the work in process (WIP) but it influences the number of tools used in the system. The main input to the PN model for a manufacturing system is the process plan. Next, all the invariants and total number of possible elementary circuits are determined using the Integrated Net Analyzer (INA) software. Output from the INA software is exported to the Excel spreadsheet. The Excel spreadsheet can be designed to calculate the total number of tokens, processing time, cycle time, etc. of each elementary circuit. Subsequently, the constraints used in Lingo will be created according to critical circuit rules. Finally, linear programming (LP) technique is used to optimize the WIP and tool inventory. Lingo software is used for the LP, the constraints from the Excel sheet will be the input data to the Lingo program, and based on those constraints the Lingo will provide the optimal values for the desired parameters. The output from Lingo will be used to recalculate the cycle time of each elementary circuit in the Excel sheet. The system is then analyzed before and after the implementation of the CPN model.

A new CPN model based on tool‐sharing philosophy for an FMS with N part types and M stations is proposed.

The paper presents a new CPN‐based approach to the design and development of a tool sharing control system, that is, intended to help use of the proper and minimal number of tools for a manufacturing system. The new CPN model also allows to find the optimal sequence. The idea is new and pure and has not been presented before using the methodology adopted in this paper.

In this second part of the report on Printed Circuit World Convention IV held at the Tokyo Prince Hotel, Tokyo, from 3–5 June 1987, a general synopsis of the content of the papers presented in the eighteen technical sessions will be given. As three sessions were run in parallel throughout the 2½‐day conference, and therefore not all presentations were heard by those reporting on the technical programme, a number of them have been briefly summarised from the Convention Proceedings.

Organisations either keep spares for their own use, or‐for‐sale to other organisations. In either case, the ultimate need is to be able to replace worn or defective parts in operational machinery or equipment. In an economic sense, spares are kept to meet the needs of the situation in the cheapest way.

THERE HAS never been more than one good reason for the founding of the European Economic Community — the Common Market, as it has come to be called. That was to extend the boundaries of each member nation to encompass them all.

This paper presents a new generic Petri net (PN) model for design and performance evaluation of a flexible assembly system (FAS) and disassembly system (DAS) with dual kanban. The architectural design of the model is derived from a generic bill of materials (BOMs) in the FAS, a reverse BOM in the DAS and the process plan in the case of flexible manufacturing system (FMS). Integration of FMS, FAS and DAS by developing a new generic PN model with the pull system is introduced. Analysis and performance evaluation of the new model based on invariant analysis and linear programming are also introduced. The method will be illustrated by a small case study.