Search results

Pervasive analytics act as a prominent role in computer-aided prediction of non-communicating diseases. In the early stage, arrhythmia diagnosis detection helps prevent the cause of death suddenly owing to heart failure or heart stroke. The arrhythmia scope can be identified by electrocardiogram (ECG) report.

The ECG report has been used extensively by several clinical experts. However, diagnosis accuracy has been dependent on clinical experience. For the prediction methods of computer-aided heart disease, both accuracy and sensitivity metrics play a remarkable part. Hence, the existing research contributions have optimized the machine-learning approaches to have a great significance in computer-aided methods, which perform predictive analysis of arrhythmia detection.

In reference to this, this paper determined a regression heuristics by tridimensional optimum features of ECG reports to perform pervasive analytics for computer-aided arrhythmia prediction. The intent of these reports is arrhythmia detection. From an empirical outcome, it has been envisioned that the project model of this contribution is more optimal and added a more advantage when compared to existing or contemporary approaches.

In reference to this, this paper determined a regression heuristics by tridimensional optimum features of ECG reports to perform pervasive analytics for computer-aided arrhythmia prediction. The intent of these reports is arrhythmia detection. From an empirical outcome, it has been envisioned that the project model of this contribution is more optimal and added a more advantage when compared to existing or contemporary approaches.

Breast cancer is the most diagnosed type of cancer in the world, and mastectomies to remove tumors are still common. An external breast prosthesis (EBP) can be used to minimize the asymmetry, due to the ablation. Some governments do not cover costs of that assistive technology, and women end up using socks and fabric pockets filled with seeds, to simulate the volume lost in the surgery. This study aims to offer to those women a decent solution, ergonomic, but still affordable.

The authors interviewed 20 mastectomized Brazilian women, listened to their relate and 3D scanned them, to give rise to personalized external lightweight breast prostheses. The authors used free software for computer-aided design and computer-aided manufacturing, and low-cost 3D printers. From the strategy of bespoke products, this study generalized the method, to conceive mass customized prostheses, in a compromise solution that reduces personalization, conserving the best features of design.

This study achieved a method to manufacture ergonomic, bespoke external breast prostheses, using low-cost technology. Previous literature made them using expensive scanners, software and printers.

The authors validated this method during pandemic, which restricted the number of patients the authors could have access to. This impacted authors’ possibility to work on matching the color of the final product and real skin. The authors understood, though, that precision of color, in the final product, is challenging, because of the peculiar aspects of human skin.

Using the method the authors proposed, personalized external breast prostheses can be manufactured using low-cost resources, democratizing better quality of life for more breast cancer survivors.

The purpose of this paper is to design and manufacture an intelligent 3D printed sensor to monitor the re-occurrence of diaphragmatic hernia (DH; after surgery) in bovines as an Internet of Things (IOT)-based solution.

The approach used in this study is based on a bibliographic analysis for the re-occurrence of DH in the bovine after surgery. Using SolidWorks and ANSYS, the computer-aided design model of the implant was 3D printed based on literature and discussions on surgical techniques with a veterinarian. To ensure the error-proof design, load test and strain–stress rate analyses with boundary distortion have been carried out for the implant sub-assembly.

An innovative IOT-based additive manufacturing solution has been presented for the construction of a mesh-type sensor (for the health monitoring of bovine after surgery).

An innovative mesh-type sensor has been fabricated by integration of metal and polymer 3D printing (comprising 17–4 precipitate hardened stainless steel and polyvinylidene fluoride-hydroxyapatite-chitosan) without sacrificing strength and specific absorption ratio value.

Operation and maintenance (O&M) processes projects such as identification, assessment, planning and execution, embody a variety of standards such as technical (method of statement), environmental, economic (campus development) and social (health and wellbeing). Because these standards have proven to be challenging to integrate, local governments are increasingly experimenting with social innovation (SI) as a bottom-up form of standard integration. This study aims to apply the concept of SI to the O&M processes of facilities management at polytechnics in Malaysia to identify problems with conventional working practices in this area and to recommend potential solutions.

The paper reviews evidence that conventional working methods generate significant problems related to paper-based forms, improper database management and flawed decision-making processes. Because of the lack knowledge about different ways of how standard integration is achieved, the comparison of three polytechnic institutions which are Rensselaer Polytechnic Institute (RPI) and Southern Polytechnic College of Engineering and Engineering Technology (SPCEET) in USA as well as Seberang Perai Polytechnic, Pulau Pinang (PSP) in Malaysia shares the ambition to realise standard integration of O&M through SI.

The findings reveal that SI leads to four ways of standard integration: computerised maintenance management system, online customer complaint, electronic form and relational database. Application of the concept of SI reveals the need for more sophisticated management solutions in the O&M processes of facilities management.

These standard integration arrangements unfortunately seem to mainly contribute to greater alignment between standard rather than true standard integration. The concept of SI will guide future improvements and developments in maintenance management systems to fulfil requirements in this area.

The development of new advanced materials, such as photopolymerizable resins for use in stereolithography (SLA) and Ti6Al4V manufacture via selective laser melting (SLM) processes, have gained significant attention in recent years. Their accuracy, multi-material capability and application in novel fields, such as implantology, biomedical, aviation and energy industries, underscore the growing importance of these materials. The purpose of this study is oriented toward the application of new advanced materials in stent manufacturing realized by 3D printing technologies.

The methodology for designing personalized medical devices, implies computed tomography (CT) or magnetic resonance (MR) techniques. By realizing segmentation, reverse engineering and deriving a 3D model of a blood vessel, a subsequent stent design is achieved. The tessellation process and 3D printing methods can then be used to produce these parts. In this context, the SLA technology, in close correlation with the new types of developed resins, has brought significant evolution, as demonstrated through the analyses that are realized in the research presented in this study. This study undertakes a comprehensive approach, establishing experimentally the characteristics of two new types of photopolymerizable resins (both undoped and doped with micro-ceramic powders), remarking their great accuracy for 3D modeling in die-casting techniques, especially in the production process of customized stents.

A series of analyses were conducted, including scanning electron microscopy, energy-dispersive X-ray spectroscopy, mapping and roughness tests. Additionally, the structural integrity and molecular bonding of these resins were assessed by Fourier-transform infrared spectroscopy–attenuated total reflectance analysis. The research also explored the possibilities of using metallic alloys for producing the stents, comparing the direct manufacturing methods of stents’ struts by SLM technology using Ti6Al4V with stent models made from photopolymerizable resins using SLA. Furthermore, computer-aided engineering (CAE) simulations for two different stent struts were carried out, providing insights into the potential of using these materials and methods for realizing the production of stents.

This study covers advancements in materials and additive manufacturing methods but also approaches the use of CAE analysis, introducing in this way novel elements to the domain of customized stent manufacturing. The emerging applications of these resins, along with metallic alloys and 3D printing technologies, have brought significant contributions to the biomedical domain, as emphasized in this study. This study concludes by highlighting the current challenges and future research directions in the use of photopolymerizable resins and biocompatible metallic alloys, while also emphasizing the integration of artificial intelligence in the design process of customized stents by taking into consideration the 3D printing technologies that are used for producing these stents.

Diagnosing brain tumors is a process that demands a significant amount of time and is heavily dependent on the proficiency and accumulated knowledge of radiologists. Over the traditional methods, deep learning approaches have gained popularity in automating the diagnosis of brain tumors, offering the potential for more accurate and efficient results. Notably, attention-based models have emerged as an advanced, dynamically refining and amplifying model feature to further elevate diagnostic capabilities. However, the specific impact of using channel, spatial or combined attention methods of the convolutional block attention module (CBAM) for brain tumor classification has not been fully investigated.

To selectively emphasize relevant features while suppressing noise, ResNet50 coupled with the CBAM (ResNet50-CBAM) was used for the classification of brain tumors in this research.

The ResNet50-CBAM outperformed existing deep learning classification methods like convolutional neural network (CNN), ResNet-CBAM achieved a superior performance of 99.43%, 99.01%, 98.7% and 99.25% in accuracy, recall, precision and AUC, respectively, when compared to the existing classification methods using the same dataset.

Since ResNet-CBAM fusion can capture the spatial context while enhancing feature representation, it can be integrated into the brain classification software platforms for physicians toward enhanced clinical decision-making and improved brain tumor classification.

This research has not been published anywhere else.

One of the most hyped concepts in the manufacturing industry is ‘Industry 4.0’. The ‘Industry 4.0’ concept is grabbing the attention of every manufacturing industry across the globe because of its immense applications. This phenomenon is an advanced version of Industry 3.0, combining manufacturing processes and the latest Internet of Things (IoT) technologies. The main advantage of this paradigm shift is efficiency and efficacy in the manufacturing process with the help of advanced automated technologies. The concept of ‘Industry 4.0’ is contemporary, so it falls under exploratory study. Therefore, the research methodology is thematic narration grounded on secondary data (online) analysis. In this light, this chapter aims to explain ‘Industry 4.0’ in terms of concepts, theories and models based on the Web of Science (WoS) database. The data include research manuscripts, book chapters, blogs, white papers, news items and proceedings. The study details the latest technologies behind the ‘Industry 4.0’ phenomenon, different business intelligence technologies and their practical implications in some manufacturing industries. This chapter mainly elaborates on Industry 4.0 frameworks designed by (1) PwC (2) IBM (3) Frost & Sullivan.

The purpose of the study is to classify the radiographic images into three categories such as fillings, cavity and implant to identify dental diseases because dental disease is a very common dental health problem for all people. The detection of dental issues and the selection of the most suitable method of treatment are both determined by the results of a radiological examination. Dental x-rays provide important information about the insides of teeth and their surrounding cells, which helps dentists detect dental issues that are not immediately visible. The analysis of dental x-rays, which is typically done by dentists, is a time-consuming process that can become an error-prone technique due to the wide variations in the structure of teeth and the dentist's lack of expertise. The workload of a dental professional and the chance of misinterpretation can be decreased by the availability of such a system, which can interpret the result of an x-ray automatically.

This study uses deep learning (DL) models to identify dental diseases in order to tackle this issue. Four different DL models, such as ResNet-101, Xception, DenseNet-201 and EfficientNet-B0, were evaluated in order to determine which one would be the most useful for the detection of dental diseases (such as fillings, cavity and implant).

Loss and accuracy curves have been used to analyze the model. However, the EfficientNet-B0 model performed better compared to Xception, DenseNet-201 and ResNet-101. The accuracy, recall, F1-score and AUC values for this model were 98.91, 98.91, 98.74 and 99.98%, respectively. The accuracy rates for the Xception, ResNet-101 and DenseNet-201 are 96.74, 93.48 and 95.65%, respectively.

The present study can benefit dentists from using the DL model to more accurately diagnose dental problems.

This study is conducted to evaluate dental diseases using Convolutional neural network (CNN) techniques to assist dentists in selecting the most effective technique for a particular clinical condition.

Most UK ambulance services undertake remote assessments of 999 calls with nurses and paramedics to manage demand and reduce inappropriate hospital admissions. However, little is known about the differences in the types of cases managed by the two professions comparatively, their clinical outcomes, and the quality and safety they offer.

The retrospective descriptive study analysed data collected at Welsh Ambulance Services University NHS Trust (WAST) from prioritisation, triage, and audit tools between the 17th May 2022 to 8th November 2022. A total of 21,076 cases and 728 audits were included for review.

There was little difference in the type and frequency of the presenting complaints assessed, and clinical outcomes reached in percentage terms. Whilst paramedics had more highly compliant call audits and fewer non-compliant call audits, there was, again, little difference in percentage terms between the two, indicating positive levels of safety across the two professional groups.

There continues to be a substantial difference between UK paramedics to those in the Middle East, the United States, and some African nations, which may limit the applicability of findings. This study also looked at a six-month window from only one UK service using one type of prioritisation and triage tool. Future research could explore longer periods from multiple services using various tools. It is important to note that this study did not link outcome data with primary, secondary or tertiary care settings. Thus, it is impossible to determine if the level of care aligned closely with the final diagnosis.

The practical implications of this work include better workforce planning for agencies who have perhaps only employed one type of clinician or a reaffirmation to those who have employed both. The authors suggest that the training and education of both sets of clinicians could remain general in nature, with no overt requirement for specificity based on professional registration alone. Commissioners and stakeholders in the wider health economy should consider ensuring equitable access to alternative pathways for patients assessed by both nurses and paramedics.

It has been posited that UK nurses and paramedics are, by virtue of their consistency in education, skill set, licensure, and general experience, both able to achieve safe and effective remote outcomes in 999 settings. This study provides evidence to support that hypothesis. These results say more about the two professions' ability to work together rather than just the professions themselves. The multidisciplinary team approach is well-established in acute care settings, and is broadly considered to improve communication, coordination decision making, adherence to up-to-date treatment recommendations, and be positive for shared learning and development for younger colleagues.

Most UK services use a mix of nurses and paramedics; however, little is known about the differences in the types of cases managed by the two professions comparatively, their clinical outcomes, and the quality and safety they each offer. The most recent studies of this nature were published in 2003 and 2004 and looked only at low-acuity 999 calls when remote assessment was not even an established role for UK paramedics. This study updates the literature, identifies areas for future research, and applies to the international setting for the most part.

Research on artificial intelligence (AI) and its potential effects on the workplace is increasing. How AI and the futures of work are framed in traditional media has been examined in prior studies, but current research has not gone far enough in examining how AI is framed on social media. This paper aims to fill this gap by examining how people frame the futures of work and intelligent machines when they post on social media.

We investigate public interpretations, assumptions and expectations, referring to framing expressed in social media conversations. We also coded the emotions and attitudes expressed in the text data. A corpus consisting of 998 unique Reddit post titles and their corresponding 16,611 comments was analyzed using computer-aided textual analysis comprising a BERTopic model and two BERT text classification models, one for emotion and the other for sentiment analysis, supported by human judgment.

Different interpretations, assumptions and expectations were found in the conversations. Three subframes were analyzed in detail under the overarching frame of the New World of Work: (1) general impacts of intelligent machines on society, (2) undertaking of tasks (augmentation and substitution) and (3) loss of jobs. The general attitude observed in conversations was slightly positive, and the most common emotion category was curiosity.

Findings from this research can uncover public needs and expectations regarding the future of work with intelligent machines. The findings may also help shape research directions about futures of work. Furthermore, firms, organizations or industries may employ framing methods to analyze customers’ or workers’ responses or even influence the responses. Another contribution of this work is the application of framing theory to interpreting how people conceptualize the future of work with intelligent machines.