Search results

Transfer relations represent analytical solutions of the linear theory of circular arches, relating each one of the kinematic and static variables at an arbitrary cross-section to the kinematic and static variables at the initial cross-section. The purpose of this paper is to demonstrate the significance of the transfer relations for structural analysis by means of three examples taken from civil engineering.

The first example refers to an arch bridge, the second one to the vault of a metro station and the third one to a real-scale test of a segmental tunnel ring.

The main conclusions drawn from these three examples are as follows: increasing the number of hangers/columns of the investigated arch bridge entails a reduction of the maximum bending moment of the arch, allowing it to approach, as much as possible, the desired thrust-line behavior; compared to the conventional in situ cast method, a combined precast and in situ cast method results in a decrease of the maximum bending moment of an element of the vault of the studied underground station by 46%; and the local behavior of the joints governs both the structural convergences and the bearing capacity of the tested segmental tunnel ring.

The three examples underline that the transfer relations significantly facilitate computer-aided engineering of circular arch structures, including arch bridges, vaults of metro stations and segmental tunnel rings.

This paper aims to illustrate the scope and challenges of using computer-aided content analysis in international marketing with the aim to capture consumer sentiments about COVID-19 from multi-lingual tweets.

The study is based on some 35 million original COVID-19-related tweets. The study methodology illustrates the use of supervised machine learning and artificial neural network techniques to conduct extensive information extraction.

The authors identified more than two million tweets from six countries and categorized them into PESTEL (i.e. Political, Economic, Social, Technological, Environmental and Legal) dimensions. The extracted consumer sentiments and associated emotions show substantial differences across countries. Our analyses highlight opportunities and challenges inherent in using multi-lingual online sentiment analysis in international marketing. Based on these insights, several future research directions are proposed.

First, the authors contribute to methodology development in international marketing by providing a “use-case” for computer-aided text mining in a multi-lingual context. Second, the authors add to the knowledge on differences in COVID-19-related consumer sentiments in different countries. Third, the authors provide avenues for future research on the analysis of unstructured multi-media posts.

The purpose of this study is to develop and describe a process which can be applied to develop new methods in the context of preliminary aircraft sizing in a successful and efficient way.

The tasks to development new aircraft sizing methods are systematically analyzed. In particular, repeating and nonrepeating tasks and common or unique tasks. Then ordered in a sequence and described generically.

A development process for new aircraft design methods which are necessary for new technologies or configurations is introduced and explained step by step.

Introducing the capability to deal with new technologies or configurations, aircraft design tools or aircraft concepts requires new sizing methods.

The paper presents a systematic approach which can be used to develop a great amount of new sizing methods with a comparable usability and quality standard in an efficient and effective way.

Particles bed binding by selective cement activation (SCA) method is a computer-aided manufacturing (CAM) technique used to produce cementitious elements. A computer-aided design file is sliced to generate G-codes before printing. This paper aims to study the effect of key input parameters for slicer software on the final properties of printed products.

The one factor at a time (OFAT) methodology is used to investigate the impact of selected parameters on the final properties of printed specimens, and the causes for the variations in outcomes of each variable are discussed.

Finer aggregates can generate a more compact layer, resulting in a denser product with higher strength. Fluid pressure is directly determined by voxel rate (r_V); however, high pressures enable better fluid penetration control for fortified products; for extreme r_Vs, residual voids in the interfaces between successive layers and single-line primitives impair mechanical strength. It was understood that printhead movement along the orientation of the parts in the powder bed improved the mechanical properties.

The design of experiment (DOE) method assesses the influence of process parameters on various input printing variables at the same time. As the resources are limited, a fractional factorial plan is carried out on a subset of a full factorial design; hence, providing physical interpretation behind changes in each factor is difficult. OFAT aids in analyzing the effect of a change in one factor on output while all other parameters are kept constant. The results assist engineers in properly considering the influence of variable variations for future DOE designs.

The purpose of this article is to increase the understanding of how improvements can be facilitated in a public service containing multiple actors in terms of identifying, aligning and prerequisites for the improvements.

The research utilizes an interactive research approach where data were gathered though a conference, workshop and a survey. The study alternately combines quality management methods such as affinity and interrelationship diagrams with computer aided text mining and latent semantic analysis.

The research shows that practitioners must consider interconnectedness between improvements and benefits that are crossing organizational levels of the public service system as well as professional borders. In public service systems, the complex reality can be better understood when improvements and benefits are classified into different organizational layers and an interconnectedness and sequence of improvement areas are acknowledged.

The research is set in the Swedish public service of the tax-paid sick leave insurance. Future research would benefit by investigating similar cases in other nations and other services.

The used methodology can be applied by practitioners to enhance a unified understanding of the system required to improve. The study also guides practitioners for how to support, relive hinders and prioritize improvements.

The research fills a gap of understanding of improvements in public services with multiple actors. As this area is difficult to improve, a novel combination of qualitative and quantitative methods paved the way for deeper and more unified understanding of the system.

Digital twin (DT) is an emerging technology that enables sophisticated interaction between physical objects and their virtual replicas. Although DT has recently gained significant attraction in both industry and academia, there is no systematic understanding of DT from its development history to its different concepts and applications in disparate disciplines. The majority of DT literature focuses on the conceptual development of DT frameworks for a specific implementation area. Hence, this paper provides a state-of-the-art review of DT history, different definitions and models, and six types of key enabling technologies. The review also provides a comprehensive survey of DT applications from two perspectives: (1) applications in four product-lifecycle phases, i.e. product design, manufacturing, operation and maintenance, and recycling and (2) applications in four categorized engineering fields, including aerospace engineering, tunneling and underground engineering, wind engineering and Internet of things (IoT) applications. DT frameworks, characteristic components, key technologies and specific applications are extracted for each DT category in this paper. A comprehensive survey of the DT references reveals the following findings: (1) The majority of existing DT models only involve one-way data transfer from physical entities to virtual models and (2) There is a lack of consideration of the environmental coupling, which results in the inaccurate representation of the virtual components in existing DT models. Thus, this paper highlights the role of environmental factor in DT enabling technologies and in categorized engineering applications. In addition, the review discusses the key challenges and provides future work for constructing DTs of complex engineering systems.

Non-uniform rational B-splines (NURBSs) are the de facto standard for representing objects in computer-aided design (CAD). The purpose of this paper is to discuss how to stick to this standard in all phases of the additive manufacturing (AM) workflow, from the CAD object to the final G-code, bypassing unnecessary polygonal approximations.

The authors use a commercial CAD system (Rhino3D along with its programming environment Grasshopper) for direct slicing of the model, offset generation and trimming. Circular arcs are represented as quadratic NURBSs and free-form geometry as quadratic or cubic polynomial B-splines. Therefore, circular arcs are directly expressible as G2/G3 G-code commands, whereas free-form paths are rewritten as a succession of cubic Bézier curves, thereby admitting exact translation into G5 commands, available in firmware for AM controllers, such as Marlin.

Experimental results of this paper confirm a considerable improvement in quality over the standard AM workflow, consisting of an initial polygonization of the object (e.g. via standard tessellation language), slicing this polygonal approximation, offsetting the polygonal sections and, finally, generating G-code made up of polyline trajectories (G1 commands).

A streamlined AM workflow is obtained, with a seamless transfer from the initial CAD description to the final G-code. By adhering to the NURBS standard at all steps, the authors avoid multiple representations and associated errors resulting from approximations.

The purpose of this paper is to evaluate the worst-case behavior of a given electronic circuit by varying the values of the components in a meaningful way in order not to exceed pre-defined currents or voltages limits during a transient operation.

An analytic formulation is used to identify the time-dependent solution of voltages or currents using proper state equations in closed form. Circuits with linear elements can be described by a system of differential equations, while circuits composing nonlinear elements are described by piecewise-linear models. A sequential quadratic program (SQP) is used to find the worst-case scenario.

It is found that the worst-case scenario can be obtained with as few solutions to the forward problem as possible by applying an SQP method.

The SQP method in combination with the analytic forward solver approach shows that the worst-case limit converges in a few steps even if the worst-case limit is not on the boundary of the parameters.

Cultural intermediaries define the standards many consumers use when evaluating cultural products. Yet, little research has focused on whether cultural intermediaries may systematically differ from each other with regard to the standards they emphasize. The purpose of this paper is to build on Bourdieu’s theory of cultural production to examine how the type of subfield reviewed and/or the cultural intermediary’s expertise (or “field-specific cultural capital”) affect the standards an intermediary uses.

This paper employed a computer-aided content analysis of the full corpus of “Rolling Stone” music album reviews (1967-2014).

Critics with lower field-specific cultural capital reflect the same logic as the subfield they are critiquing. Critics with higher field-specific cultural capital reflect the opposite logic.

Bourdieu was ambivalent about whether cultural intermediaries will reflect the logic of a subfield. Results show that the answer depends on the intermediary’s field-specific cultural capital. The results also reinforce previous findings that individuals with high field-specific cultural capital are more likely to break with the logic of a field.

Not all intermediaries are created equal. Producers and consumers who rely on cultural intermediaries should understand the intermediary’s critical analysis within the context of his/her experience.

This is one of the first studies to examine how a cultural intermediary’s field-specific cultural capital impacts his or her work. The findings are based on a large review sample and include reviewers’ analyses as they developed from having lower to higher field-specific cultural capital.

The purpose of this paper is to provide an analysis of the performance of a new five-phase doubly fed induction generator (DFIG).

This paper presents the results of a research work related to five-phase DFIG framing, including the development of an analytical model, FEM analysis as well as the results of laboratory tests of the prototype. The proposed behavioral level analytical model is based on the winding function approach. The developed DFIG model was used at the design stage to simulate the generator’s no-load and load state. Then, the results of the FEM analysis were shown and compared with the results of laboratory tests of selected DFIG operating states.

The paper provides the results of analytical and FEM simulation and measurement tests of the new five-phase dual-feed induction generator. The use of the MATLAB Simscape modeling language allows for easy and quick implementation of the model. Design assumptions and analytical model-based analysis have been verified using FEM analysis and measurements performed on the prototype. The results of the presented research validate the design process as well as show the five-phase winding design advantage over the three-phase solution regarding the control winding power quality.

The main disadvantage of the winding function approach-based model development is the simplification regarding omitting the tangential airgap flux density component. However, this fault only applies to large airgap machines and is insignificant in induction machines. The results of the DFIG analyses were limited to the basic operating states of the generator, i.e. the no-load state, the inductive and resistive load.

The novel DFIG with five phase rotor control winding can operate as a regular three-phase machine in an electric power generation system and allows for improved control winding power quality of the proposed electrical energy generation system. This increase in power quality is due to the rotor control windings inverter-based PWM supply voltage, which operates with a wider per-phase supply voltage range than a three-phase system. This phenomenon was quantified using control winding current harmonic analysis.

The paper provides the results of analytical and FEM simulation and measurement tests of the new five-phase dual-feed induction generator.