Search results

The purpose of this study is to utilize two types of gypsum mold wastes from two different factories as novel and economical reinforcing fillers for composites that may be useful for building materials and floors. Two types of gypsum mold wastes from two different factories as raw materials were incorporated into linear low density polyethylene (LLDPE) aiming to get rid of that waste in one hand and obtaining useful economical composites suitable for building materials and floors.

Composites were prepared from two types of gypsum mold wastes substituted with different ratios from raw gypsum and LLDPE throughout the melt blending technique. The physico-mechanical and electrical investigations in addition to the morphology of the composites were included.

The mechanical results illustrate that substituting commercial gypsum with gypsum mold waste positively affects tensile strength, flexural strength and hardness shore D for the LLDPE composites. The tensile strength increased from 5 MPa for LLDPE filled with commercial gypsum as blank samples to 11.2 and 13.2 MPa for LLDPE filled with D and S waste. Also, electrical properties which include both permittivity ɛ′ and dielectric loss ɛ″ increased with increasing the waste content in the LLDPE matrix. In addition to the electrical conductivity values, σ lies in the order of insulation materials. Consequently, it is possible to produce materials with a gypsum matrix by adding industrial waste, improving the behavior of the traditional gypsum and enabling those composites to be applied in various construction applications as eco-friendly tiles.

This study aims to prepare eco-friendly composites based on LLDPE and waste gypsum mold to preserve resources for the coming generations, other than lowering the environmental footprint and saving the costs of getting rid of it.

The urgency to address climate change and its devastating consequences has never been more pressing. As societies become increasingly aware of the detrimental impact of traditional housing on the planet, there is a growing demand for eco-friendly housing solutions that prioritize energy efficiency, resource conservation and reduced carbon emissions. Therefore, this study aims to investigate the factors that influence customers’ priority toward eco-friendly house purchasing intention.

This study collected 386 data using a quantitative research strategy and purposive sampling method. This study uses a hybrid analysis technique using partial least squares structural equation modeling (PLS-SEM) and fuzzy-set qualitative comparative analysis (fsQCA) approaches to identify the influencing factors.

The PLS-SEM analysis found that attitude toward the eco-friendly house, subjective norms, performance expectancy, environmental knowledge and environmental sensitivity have a positive influence on eco-friendly house purchasing intention. However, perceived behavioral control and willingness to pay were found to have insignificant effect on customers’ intention to purchase eco-friendly houses. The fsQCA results further revealed complex causal relationships between the influencing factors.

This research will not only contribute to academic knowledge but also provide practical guidance to real estate developers, policymakers and individuals looking to make environmentally responsible choices. By understanding the factors that influence consumers’ intentions to purchase eco-friendly houses, we can pave the way for a more sustainable and resilient future.

This study has used a hybrid analysis technique, combining PLS-SEM and fsQCA, to enhance the predictive accuracy of eco-friendly house purchase intentions among individuals residing in densely populated and highly polluted developing countries, such as Bangladesh.

The purpose of this study is to improve the mechanical property and processing performance and reduce the cost of the polylacticacid/polybutyleneadipate-co-terephthalate(PLA/PBAT) composites, the calcium carbonate (CaCO₃) and compatibilizer styrene-maleicanhydride copolymer (SMA-2025) were added to the PLA/PBAT system, and the effect of CaCO₃ and SMA-2025 on the morphology, structure, mechanical property, thermal property, thermalstability and shape memory property of the CaCO₃/PLA/PBAT composites were studied and discussed.

The CaCO₃/PLA/PBAT shape memory composites were prepared via melt-blending and hot-pressing methods, and the effect of CaCO₃ and SMA-2025 on the property of the composites was investigated via scanning electron microscope, universal testing instrument, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis and DMA, respectively.

The interface property, mechanical property, thermal stability, shape memory recovery ratios and recovery stresses, and processing performance of the CaCO₃/PLA/PBAT shape memory composites were significantly improved by adding of CaCO₃ and SMA-2025. Moreover, the CaCO₃/PLA/PBAT composites have good blowing film processing performance.

This study will provide a reference for the research, processing and application of the high-performance CaCO₃/PLA/PBAT shape memory composites.

The current bending test method can only test the bending performance of fabric in one direction at a time. It is not possible to directly observe the bending morphology of fabrics in different directions, and it is necessary to cut samples and repeat the test several times, which takes more time. For this situation, a multidirectional visualization of the fabric bending test method is proposed, using which multiple results can be obtained at one time and the fabric bending can be visualized.

About 17 fabrics are tested using a self-designed device. The fabrics are cut into special triangles and multiple sets of results in three directions are obtained at once using the device. The experimental specimens are photographed from the above and the transverse elongation length, bending projection area and circumference are extracted after image processing.

The results show that the correlation coefficients of transverse elongation, bending projected area and circumference are good with the bending length measured by the cantilever method. In which, all three indicators are positively correlated with the bending length. This indicates the good feasibility of the new method.

This method can get the bending index of fabrics in three directions, with five samples in each direction at one time. Meanwhile, it can also visualize the flexural differences between different fabrics and directions of the same fabric. It can provide more efficient testing means for the textile testing field, and the testing efficiency is 15 times of the existing method, which has better theoretical significance and practical values.

The global emphasis on sustainability is driving organizations to embrace financial technology (Fintech) solutions as a means of enhancing their sustainable performance. This study seeks to unveil the intermediary role played by green finance and competitiveness, along with the moderating impact of digital transformation (DT), in the intricate relationship between Fintech adoption and sustainable performance.

Drawing on existing literature, we construct a comprehensive conceptual framework to thoroughly analyse these interconnected variables. To empirical validate of our model, a dual structural equation modelling–artificial neural network) SEM–ANN approach was employed, adding a robust layer of validation to our study’s proposed framework. A sample of 438 banking employees in Pakistan was collected using a simple random sampling technique, with 411 samples deemed suitable for subsequent analysis. Initially, data scrutiny and hypothesis testing were carried out using Smart-PLS 4.0 and SPSS-23. Subsequently, the ANN technique was utilized to assess the importance of exogenous factors in forecasting endogenous factors.

The findings from this research underscore the direct and significant influence of Fintech adoption and DT on the sustainable performance of banks. Notably, green finance and competitiveness emerge as pivotal mediators, bridging the gap between Fintech adoption and sustainable performance. Moreover, DT emerges as a critical moderator, shaping the relationships between Fintech adoption and both green finance and competitiveness. The integration of the ANN approach enhances the SEM analysis, providing deeper insights and a more comprehensive understanding of the subject matter.

This study contributes to the enhanced comprehension of Fintech, green finance, competitiveness, DT and the sustainable performance of banks. Recognizing the importance of amalgamating Fintech adoption, green finance and transformational leadership becomes essential for elevating the sustainable performance of banks. The insights garnered from this study hold valuable implications for policymakers, practitioners and scholars aiming to enhance the sustainable performance of banks within the competitive business landscape.

The purpose of this study was to analyze the effects of social media analytics on firm performance using a sample of small and medium enterprises (SMEs) in Thailand. This study also investigated whether entrepreneurial orientation (EO) moderated the effects of social media analytics on firm performance.

This study used SMEs listed in the Department of Business Development of Thailand as the sampling frame. Probability sampling was used to draw the sample. A questionnaire survey was used to collect data from 334 firms. The data were analyzed using partial least squares structural equation modeling.

The results supported the positive association between social media analytics practices on firm performance. Moreover, this study found that EO moderated this association significantly. In particular, the positive association between social media analytics practices on firm performance was higher for firms that exhibit a high EO than those that exhibit a low EO. This result indicated that firms that implement social media analytics practices achieved higher performance when they exhibited a high EO.

Social media data analytics should be implemented to strengthen the technological competence of firms. Moreover, firms should integrate EO practices into their implementation of social media analytics to increase their ability to generate substantial improvements in their strategic implementation, thereby enabling them to gain sustainable competitiveness in their market.

Because SMEs are the driving force for economic growth and development in Thailand, their ability to achieve higher performance when they effectively integrate EO practices into their implementation of social media data analytics could be beneficial for the sustainable development of Thailand, especially in the current data-driven era.

The result that EO moderates the effect in enhancing social media analytics practices’ influence on firm performance provides new knowledge that extends the boundary of research on this topic. The authors provided a theoretical explanation to clarify the way the implementation of social media analytics practices should be integrated with EO to increase the level of performance that firms achieve from such practices.

The purpose of this study is to explore the interplay among self-organization, networks and sustainable innovations within microfinance institutions (MFIs) and to examine the extent to which organizational resilience plays a significant role in shaping these dynamics as a mediator.

This paper adopted a cross-sectional research design combined with analytical and descriptive approach to collect the data. Smart partial least squares structural equation modeling (PLS-SEM) was used to construct the measurement model and structural equation model to test the mediating effect under this study.

The results revealed that organizational resilience is a significant mediator in the relationship between self-organization, networks and sustainable innovations among microfinance institutions in Uganda.

The data for this study were collected only from microfinance institutions in Uganda. Future studies may collect data from other formal financial institutions like commercial banks and credit institutions to test the mediating effect of organizational resilience. More still, the study adopted only a single approach of using a questionnaire. However, future research through interviews may be desirable. Likewise this study was cross-sectional in nature. Therefore, a longitudinal study may be useful in future while investigating the mediating role of organizational resilience traversing over a long time frame.

A possible implication is that microfinance institutions which desire to have sustainable innovative solutions for their business operations in disruptive circumstances may need to scrutinize their capacity to be resilient and self-organize.

Microfinance institutions play a great role to the underserved clients. Thus, for each to re-organize to be able to provide services that meet users’ needs, without physical products so as to ensure long-term financial and social welfare combined with the ability to bounce back and adapt in times of economic downturn to avoid mission adrift.

While most studies have been carried out on organizational resilience, this paper takes center stage and is the first to test the mediating role of organizational resilience in the relationship between self-organization, networks and sustainable innovations, especially in microfinance institutions in Uganda. This paper generates strong evidence and contributes to the powerful influence of organizational resilience in enhancing the level of sustainable innovations based on self-organization and networks.

The article aims to present the results of adapting the team boosting behaviors (TBB) scale to Polish cultural conditions and validating it.

The research methodology consisted of three steps. In the first step, I translated the TBB scale into Polish using a rigorous back-translation method. Next, to assess content validity, nine domain experts reviewed the initial version of the instrument for clarity and relevance. Finally, I applied the scale to a sample of 532 team members and underwent thorough psychometric testing to assess construct validity. I employed structural equation modeling (SEM) with the partial least squares (PLS) factor-based algorithm technique for confirmatory factor analysis to assess the scale’s reliability and validity.

After development, the Polish version of the TBB scale kept its three sub-scale structures. However, the validation process led to a slight reduction in the number of test items compared to the original scale.

The findings imply that the Polish version of the scale is a valid and reliable tool for assessing TBB. However, I recommend additional studies to confirm this instrument’s structure.

The results confirmed the reliability and relevance of the tool for measuring TBBs in Polish cultural conditions. The tool provides the basis for implementing further research with the TBB construct in Poland and internationally.

This study aims to evaluate the development of composites made of epoxy (E) resin with different weight percentages of polypropylene (PP) and graphene oxide (Go) to form nanocomposite plates.

A hand lay-up process was used to develop 21 different composites, with varying concentrations of PP (5%–35%) and Go (5%–35%). A ternary composite of E matrix was produced by combining binary fillers PP and Go (5%–35%) in a 1:1 ratio to a (95%–5%) solution. With the help of adopting the melt condensation deal to extract Go, the modified Hummers method was used to make Go platelets.

Through field emission scanning electron microscopy (FESEM) and X-ray diffraction investigations, the particulate’s size and structural characteristics were identified. Based on the FESEM analysis of the collapsed zones of the composites, a warp-and-weft-like structure is evident, which endorses the growth yield strength, flexural modulus and impact strength of the composites.

The developed nanocomposites have exceptional mechanical capabilities compared to plain E resin, with E resin exhibiting better tensile strength, modulus and flexural strength when combined with 10% PP and 10% Go. When compared to neat E resin, materials formed from composites have exceptional mechanical properties. When mixed with 10% PP and 10% Go, E resin in particular displays improved tensile strength (23 MPa), tensile modulus (4.15 GPa), flexural strength (75.6 MPa) and other attributes. Engineering implications include automobile side door panels, spacecraft applications, brake pads and flexible battery guards.

Negative brand engagement represents a pervasive and persistent feature of interactivity in online contexts. Although existing research suggests that consumer negativity is potentially more impactful or detrimental to brands than its positive counterpart, few studies have examined negative brand-related cognitions, feelings and behaviours. Building on the concept of brand engagement, this study aims to operationalise negative online brand engagement.

This paper presents the results of nine studies that contributed to the development and validation of the proposed scale. Building on the concept of engagement, Studies 1–3 enhanced the construct conceptualisation and generated items. Study 4 involved validation with an academic expert panel. The process of measure operationalisation and validation with quantitative data was completed in Studies 5–8. Finally, the scale's nomological validity was assessed in Study 9.

The results confirm the multidimensional nature of negative online brand engagement. The validated instrument encompasses four dimensions (cognition, affection, online constructive behaviour and online destructive behaviour), captured by 17 items.

Progress in understanding and dealing with negative online brand engagement has been hampered by disagreements over conceptualisation and the absence of measures that capture the phenomenon. This work enhances managerial understanding of negativity fostering strategies that protect brand engagement and improve firm performance.