Search results

This paper aims to examine rising geopolitical tensions associated with the implementation of the US Creating Helpful Incentives to Produce Semiconductors (CHIPS) Act of 2022.

To provide background for the analysis, the authors conduct a theoretic analysis of the literature to introduce the current geopolitical environment while examining the rising threat of conflict, general factors driving change in the world order, and the critical role that the international semiconductor supply chain plays to all involved.

In this paper, the authors observe that in good times, economic forces drive capital-intensive industries toward a free-trade-inspired concentration of manufacturing in low-cost centers of production. In challenging economic and geopolitical times, however, the trend reverses toward retrenchment and what some call techno-nationalism. This occurs as nations struggle to secure access to critical sources of supply for themselves while stifling access for competitors and rivals.

The CHIPS Act of 2022 signifies a pivotal change in global trade dynamics, shifting away from liberal norms to techno-nationalism. This shift may spark supply chain hurdles as countries adopt nationalistic sourcing, potentially causing shortages in vital components like chips. Consequently, consumers may face disruptions as companies seek alternative suppliers, resulting in higher costs and lower-quality products. Supply chain disruptions may also delay product launches, and retaliatory trade actions could affect multiple industries, limiting access to lucrative markets.

The passage of the US CHIPS Act of 2022 has major implications related to global supply chain issues and potential geopolitical concerns. This study uses the threat of potential conflict as a lens for examining the international semiconductor supply chain.

This paper is supposed to provide a critical review of current research progress on thermal management in grinding of superalloys, and future directions and challenges. By understanding the current progress and identifying the developing directions, thermal management can be achieved in the grinding of superalloys to significantly improve the grinding quality and efficiency.

The relevant literature is collected from Web of Science, Scopus, CNKI, Google scholar, etc. A total of 185 literature is analyzed, and the findings in the literature are systematically summarized. In this case, the current development and future trends of thermal management in grinding of superalloys can be concluded.

The recent developments in grinding superalloys, demands, challenges and solutions are analyzed. The theoretical basis of thermal management in grinding, the grinding heat partition analysis, is also summarized. The novel methods and technologies for thermal management are developed and reviewed, i.e. new grinding technologies and parameter optimization, super abrasive grinding wheel technologies, improved lubrication, highly efficient coolant delivery and enhanced heat transfer by passive thermal devices. Finally, the future trends and challenges are identified.

Superalloys have excellent physical and mechanical properties, e.g. high thermal stability, and good high-temperature strength. The superalloys have been broadly applied in the aerospace, energy and automobile industries. Grinding is one of the most important precision machining technologies for superalloy parts. Owing to the mechanical and physical properties of superalloys, during grinding processes, forces are large and a massive heat is generated. Consequently, the improvement of grinding quality and efficiency is limited. It is important to conduct thermal management in the grinding of superalloys to decrease grinding forces and heat generation. The grinding heat is also dissipated in time by enhanced heat transfer methods. Therefore, it is necessary and valuable to holistically review the current situation of thermal management in grinding of superalloys and also provide the development trends and challenges.

This book chapter focuses on firstly social innovation and tools used to address the social needs and foster social innovation initiatives. Looking at the world economic forum and how it supports the social innovations, currency swings, low paying jobs growing rapidly, rapid change and growth as a result of high volatility and high returns, respectively. Secondly looking at the emerging market brought about by the social innovations and how they interconnect. Leading innovation emerging market has three main industries semiconductors, fin-tech, and electric cars. It also looks at the significance of technology in the development of business emerging markets, the role of technology in the emerging market and activities over the decades. Small firms in emerging areas face three major challenges which technology might help overcome. The challenges are trust, sustainability, and network. The role of technology replacing analog chip used for power supply, sensors, wideband signal make up the large semiconductors in the United States replaced with digital chip such as logical operations, data storage, computer information management all this have given birth to artificial intelligence, autonomous machines, self-driving cars, supply-chain management, cloud computing, and software-as-a-service (SaaS) applications are all made possible by digital chips. These are also used for e-commerce, mobile payment, fine-tech, 5G telecom, health-care advancement, remote learning, online entertainment, and cloud computing. Technical advancements that has sparked a revolution that would be especially advantageous for emerging market and small-cap enterprises are the causes of these benefits of how it has affected countries such as Europe, the United States, China, and India to mention a few.

The hygroscopic properties of 3D-printed filaments and moisture absorption itself during the process result in dimensional inaccuracy, particularly for nozzle movement along the x-axis and for micro-scale features. In view of that, this study aims to analyze in depth the dimensional errors and deviations of the fused filament fabrication (FFF)/fused deposition modeling (FDM) 3D-printed micropillars (MPs) from the reference values. A detailed analysis into the variability in printed dimensions below 1 mm in width without any deformations in the printed shape of the designed features, for challenging filaments like polymethyl methacrylate (PMMA) has been done. The study also explores whether the printed shape retains the designed structure.

A reference model for MPs of width 800 µm and height 2,000 µm is selected to generate a g-code model after pre-processing of slicing and meshing parameters for 3D printing of micro-scale structure with defined boundaries. Three SETs, SET-A, SET-B and SET-C, for nozzle diameter of 0.2 mm, 0.25 mm and 0.3 mm, respectively, have been prepared. The SETs containing the MPs were fabricated with the spacing (S) of 2,000 µm, 3,200 µm and 4,000 µm along the print head x-axis. The MPs were measured by taking three consecutive measurements (top, bottom and middle) for the width and one for the height.

The prominent highlight of this study is the successful FFF/FDM 3D printing of thin features (<1mm) without any deformation. The mathematical analysis of the variance of the optical microscopy measurements concluded that printed dimensions for micropillar widths did not vary significantly, retaining more than 65% of the recording within the first standard deviation (SD) (±1 s). The minimum value of SD is obtained from the samples of SET-B, that is, 31.96 µm and 35.865 µm, for height and width, respectively. The %RE for SET-B samples is 5.09% for S = 2,000µm, 3.86% for S = 3,200µm and 1.09% for S = 4,000µm. The error percentage is so small that it could be easily compensated by redesigning.

The study does not cover other 3D printing techniques of additive manufacturing like stereolithography, digital light processing and material jetting.

The presented study can be potentially implemented for the rapid prototyping of microfluidics mixer, bioseparator and lab-on-chip devices, both for membrane-free bioseparation based on microfiltration, plasma extraction from whole blood, size-selection trapping of unwanted blood cells, and also for membrane-based plasma extraction that requires supporting microstructures. Our developed process may prove to be far more economical than the other existing techniques for such applications.

For the first time, this work presents a comprehensive analysis of the fabrication of micropillars using FDM/FFF 3D printing and PMMA in filament form. The primary focus of the study is to minimize the dimensional inaccuracies in the 3D printed devices containing thin features, especially in the area of biomedical engineering, by delivering benefits from the choice of the parameters. Thus, on the basis of errors and deviations, a thorough comparison of the three SETs of the fabricated micropillars has been done.

This study aims to examine the role of Australian casinos in facilitating money laundering and Chinese capital flight.

The reports and transcripts of evidence from government inquiries into money laundering in Australian casinos are integrated with analyses of Asian transnational crime.

Money laundering in Australian casinos is linked to transnational crime and Chinese capital flight. A central finding is that junket operators play a key role in facilitating money laundering. The casinos are particularly exposed to criminal influences in the Chinese very important person gambling market, since they have used junket operators and underground banks, many of whom are closely linked to major Chinese criminal groups from Hong Kong and Macau.

Very little information is available on money laundering in Australian casinos and this research has relied on the government inquiries that have been conducted over the past two years on the subject.

The author’s focus on money laundering in Australian casinos in the context of Asia-Pacific transnational crime is important for Federal and state government regulators grappling with the rapidly changing money laundering issues. The government inquiries recognised that the money laundering was related to transnational crime, but did not have the time and resources to explore the topic. The paper provides state government casino regulators and financial crime regulators with a broader international perspective to anticipate future money laundering and crime pressures facing Australia’s casinos.

Money laundering in Australian casinos has had devastating social implications on the community. My research helps to focus attention on the problems of transnational crime and money laundering.

Little research has examined the linkages between casinos and transnational crime. This study has found that Australian casinos were used to launder the proceeds of illegal drug trafficking and to facilitate Chinese capital flight. While casinos have been forced by damming government inquiries to tighten anti-money laundering controls, it is likely that there will be pressure to relax these controls in the future because of competitive pressure from other casinos in the Asia-Pacific region.

At the beginning of the 21st century, a new class of information workers, the “information have-less” has risen. This class of workers alleviates the influence of information and communication technologies (ICTs) revolution on poverty and unemployment. The purpose of this study is to investigate the presence of this class of workers in Egypt and assess the size and potential growth of this category of workers.

The study clarifies the conceptual framework of the new division of labor, in the information age. The Central Agency for Public Mobilization and Statistics, American Chamber of Commerce in Egypt, Ministry of Communications and Information Technology and Information and Decision Support Center websites provided secondary data for this study. These data are used to assess the size of “the information have less” in Egypt.

The division of work and class, in the 21st century, depends on the level of skills possessed to work with ICTs. So, class and labor nowadays could be divided into self-programmable labor (Innovators). Information have-less labor class, adding value to the economy by learning skills and presenting repetitive work. Generic labor class, who cannot work with ICTs, and work in jobs, that do not need computers or other ICTs. The study has shown that the “information have-less” labor class is present in Egypt since the beginning of the 21st century, in all its categories; entrepreneurism, the service sector and the manufacturing sector. There are approximately 50% of this labor class in the service sector and only 13% of the information have-less works in manufacturing sector despite the great opportunities that Egypt has to expand manufacturing to absorb more employment. The inclusion of information technology (IT), in all domains, has not decreased employment in Western countries but has reallocated information have-less employment toward the service sector, and there would probably be the same effect in Egypt.

The study highlights the need for Egyptian policymakers to encourage the manufacturing and service sectors to provide huge working opportunities. The Egyptian government has to change the educational policies, at all stages, to include digital learning skills so IT can be incorporated in a wide range of economic activities. Further research includes: conducting a survey to measure the contribution of the entrepreneurial part of the information have-less employment in Egypt. In addition, a model may be developed, by the researcher to examine the reallocation of employees in Egypt.

Studying employment, in Egypt, using the conceptual framework of the information age is rarely being done.

Aversion linked to disgust and neophobia is the primary reason for human reluctance towards edible insects as a sustainable food source. Stimulating positive emotions may overcome these mental barriers. Cute visuals and claims on product packaging can trigger positive affective responses in consumers whilst modulating taste expectations. This study investigated how these elements influence emotions, perceptions and attitudes towards insect-based foods.

An online cross-cultural study involving French (n = 747) and Colombian (n = 695) consumers was conducted using two insect-based products: chips (hedonic) and bread (functional). Ten visual packaging variations were created per product, emphasising palatability, sustainability, nutrition and popularity (plus a control: no claim) affixed to the image of a cute anthropomorphic cricket or its silhouette. Visual appreciation and associations were assessed along with the participants' degree of food variety seeking, familiarity with entomophagy and openness to consuming edible insects.

Differences were reported in emotions, perceptions and attitudes based on the combination of packaging elements, product type and consumer segments. The findings suggest that food marketers should use cute insect depictions linked to palatability-focussed claims to alleviate young French adults' reluctance towards insect-based foods (IFs). Colombians responded better to pro-social claims and neutrally to cuteness.

The results should be valuable to stakeholders seeking to enhance food marketing strategies related to IFs amongst target consumer segments.

This study is the first to assess how baby schema cuteness induces emotional changes towards IFs and how it affects perceptions and attitudes amongst distinct populations and age segments.

The purpose of this study is to increase awareness of current supply chain (SC) security-related issues by providing an extensive analysis of existing SC security solutions and their limitations. The security of SCs has received increasing attention from researchers, due to the emerging risks associated with their distributed nature. The increase in risk in SCs comes from threats that are inherently similar regardless of the type of SC, thus, requiring similar defence mechanisms. Being able to identify the types of threats will help developers to build effective defences.

In this work, we provide an analysis of the threats, possible attacks and traceability solutions for SCs, and highlight outstanding problems. Through a comprehensive literature review (2015–2021), we analysed various SC security solutions, focussing on tracking solutions. In particular, we focus on three types of SCs: digital, food and pharmaceutical that are considered prime targets for cyberattacks. We introduce a systematic categorization of threats and discuss emerging solutions for prevention and mitigation.

Our study shows that the current traceability solutions for SC systems do not offer a broadened security analysis and fail to provide extensive protection against cyberattacks. Furthermore, global SCs face common challenges, as there are still unresolved issues, especially those related to the increasing SC complexity and interconnectivity, where cyberattacks are spread across suppliers.

This is the first time that a systematic categorization of general threats for SC is made based on an existing threat model for hardware SC.

The purpose of this paper is to evaluate the effectiveness of a policy, the 2014 UK Supply Chain Plan, which aimed to create a local supply chain in a sector (offshore wind) where the central manufacturing node capabilities and knowledge are not possessed locally. It aims to address the following question: can policy create a new manufacturing supply chain from a void?

A qualitative field research approach is used to derive an original set of theoretical propositions explaining the motivation behind the Supply Chain Plan policy. The outcomes of this policy are examined 10 years later in order to provide an opportunity to observe the impact of the policy.

The conclusion is that the policy has been successful in increasing local content, and some of that local content has benefited local manufacturers. However, a lot of the increase in local content has been achieved in non-manufacturing areas or in new areas. The main issue, i.e. the lack of a central manufacturing capability, remains unaddressed. The impact of the local content policy on cost is undocumented.

There is an increasing amount of interest in regional/local supply chains after the COVID-19 pandemic and increasing geopolitical tensions. This paper's originality is to document with an industry case study the fact that manufacturing knowledge and capabilities are the central growth engine of supply chains and that creating a new manufacturing supply chain competing with well-established clusters is not a simple matter that can be achieved through a local content policy. Such policies raise critical questions about the policy makers' implicit valuation of manufacturing technology.

The study aims to compare and analyze the impact of the commonly used pallets (wooden pallet and plastic pallets), using life cycle assessment (LCA), then provide certain suggestions for the development of green packaging.

In this study, software Simapro was used to calculate and analyze the whole life cycle of pallets from the stage of raw materials and production to processing and waste disposal.

A total of 12 environmental categories were used to quantitatively analyze the environmental impact of the four different pallets. The results showed that, regardless of raw material, processing, or waste stage, the environmental impact of wooden pallet was lower than that of plastic pallet. Wooden pallet was better than plastic pallets.

This study compared and analyzed the pallet of 1 × 1.2m with different materials.

Green packaging is the development trend of the future packaging, which follows the principle of 3R1D. According to the calculation results, corresponding suggestions can be put forward from production, processing, using, wasting and other aspects, and make corresponding contributions to the development of green packaging.

The contribution and impact of each stage of the product on the environment can be studied. The environmental impact, such as global warming potential, water scarcity, can be reduced through different solutions such as the use of green materials, good processing techniques and higher recycling rates.