Search results

The purpose of this paper is to analyze the micro-motion of the cylinder block.

Based on the elasto-hydrodynamic lubrication, a numerical model for the cylinder block/valve plate interface is proposed, with consideration of the elastic deformations, the pressure-viscosity effect and asperity contacts. The influence-function method is applied to calculating the actual deformations of the cylinder block and the valve plate. The asperity contact model simplified from Greenwood assumption is introduced into the numerical model. Furthermore, the relationship between the micro-motion and the operating condition, the sealing belt width is discussed, respectively.

The results show an increase in the discharge pressure causes the tilt state and the vibrating motion getting worse, which can be eased by improving the rotational speed, the sealing belt width and the ratio of external and internal sealing belt width.

The proposed research can provide a theoretical reference for the optimizing design of cylinder block/valve plate pair.

During rush hours, many passengers find it difficult to board the first train due to the insufficient capacity of metro vehicles, namely, left behind phenomenon. In this paper, a data-driven approach is presented to estimate left-behind patterns using automatic fare collection (AFC) data and train timetable data.

First, a data preprocessing method is introduced to obtain the waiting time of passengers at the target station. Second, a hierarchical Bayesian (HB) model is proposed to describe the left behind phenomenon, in which the waiting time is expressed as a Gaussian mixture model. Then a sampling algorithm based on Markov Chain Monte Carlo (MCMC) is developed to estimate the parameters in the model. Third, a case of Beijing metro system is taken as an application of the proposed method.

The comparison result shows that the proposed method performs better in estimating left behind patterns than the existing Maximum Likelihood Estimation. Finally, three main reasons for left behind phenomenon are summarized to make relevant strategies for metro managers.

First, an HB model is constructed to describe the left behind phenomenon in a target station and in the target direction on the basis of AFC data and train timetable data. Second, a MCMC-based sampling method Metropolis–Hasting algorithm is proposed to estimate the model parameters and obtain the quantitative results of left behind patterns. Third, a case of Beijing metro is presented as an application to test the applicability and accuracy of the proposed method.

Advanced driving assistance system (ADAS) has been applied in commercial vehicles. This paper aims to evaluate the influence factors of commercial vehicle drivers’ acceptance on ADAS and explore the characteristics of each key factors. Two most widely used functions, forward collision warning (FCW) and lane departure warning (LDW), were considered in this paper.

A random forests algorithm was applied to evaluate the influence factors of commercial drivers’ acceptance. ADAS data of 24 commercial vehicles were recorded from 1 November to 21 December 2018, in Jiangsu province. Respond or not was set as dependent variables, while six influence factors were considered.

The acceptance rate for FCW and LDW systems was 69.52% and 38.76%, respectively. The accuracy of random forests model for FCW and LDW systems is 0.816 and 0.820, respectively. For FCW system, vehicle speed, duration time and warning hour are three key factors. Drivers prefer to respond in a short duration during daytime and low vehicle speed. While for LDW system, duration time, vehicle speed and driver age are three key factors. Older drivers have higher respond probability under higher vehicle speed, and the respond time is longer than FCW system.

Few research studies have focused on the attitudes of commercial vehicle drivers, though commercial vehicle accidents were proved to be more severe than passenger vehicles. The results of this study can help researchers to better understand the behavior of commercial vehicle drivers and make corresponding recommendations for ADAS of commercial vehicles.

The e-freight program launched by the International Air Transport Association (IATA) has gradually become a standard specification for international air freight operations. This study examined critical factors affecting air freight forwarders’ decision to adopt the IATA e-freight using a technology-organization-environment model with air freight forwarders in Taiwan as the base. Our findings show that ‘information technology (IT) competence’, ‘trading partner pressure’, ‘government policy’ and ‘competitive pressure’ all have significant positive effects on air freight forwarders’ decision to adopt the e-freight and the top three factors among these are ‘government funding’, ‘government’s active promotion’ and ‘government’s requirement of electronic air waybill (e-AWB)’. Finally, this study proposes strategies that can encourage air freight forwarders to decide on e-freight adoption for the information of relevant oK regyawniozradtison International Air Transport Association (IATA); IATA e-freight; Technology organization environment model; Air freight forwarder

The purpose of the work is to provide a comprehensive review of the digital image correlation (DIC) technique for those who are interested in performing the DIC technique in the area of manufacturing.

No methodology was used because the paper is a review article.

no fundings.

Herein, the historical development, main strengths and measurement setup of DIC are introduced. Subsequently, the basic principles of the DIC technique are outlined in detail. The analysis of measurement accuracy associated with experimental factors and correlation algorithms is discussed and some useful recommendations for reducing measurement errors are also offered. Then, the utilization of DIC in different manufacturing fields (e.g. cutting, welding, forming and additive manufacturing) is summarized. Finally, the current challenges and prospects of DIC in intelligent manufacturing are discussed.

Beijing rail transit can actively control the density of rail transit passenger flow, ensure travel facilities and provide a safe and comfortable riding atmosphere for rail transit passengers during the epidemic. The purpose of this paper is to efficiently monitor the flow of rail passengers, the first method is to regulate the flow of passengers by means of a coordinated connection between the stations of the railway line; the second method is to objectively distribute the inbound traffic quotas between stations to achieve the aim of accurate and reasonable control according to the actual number of people entering the station.

This paper analyzes the rules of rail transit passenger flow and updates the passenger flow prediction model in time according to the characteristics of passenger flow during the epidemic to solve the above-mentioned problems. Big data system analysis restores and refines the time and space distribution of the finely expected passenger flow and the train service plan of each route. Get information on the passenger travel chain from arriving, boarding, transferring, getting off and leaving, as well as the full load rate of each train.

A series of digital flow control models, based on the time and space composition of passengers on trains with congested sections, has been designed and developed to scientifically calculate the number of passengers entering the station and provide an operational basis for operating companies to accurately control flow.

This study can analyze the section where the highest full load occurs, the composition of passengers in this section and when and where passengers board the train, based on the measured train full load rate data. Then, this paper combines the full load rate control index to perform reverse deduction to calculate the inbound volume time-sharing indicators of each station and redistribute the time-sharing indicators for each station according to the actual situation of the inbound volume of each line during the epidemic. Finally, form the specified full load rate index digital time-sharing passenger flow control scheme.

The main objectives of collective forest tenure reform in China are to stimulate rural households to invest in forestry management, protect the ecosystem and improve their livelihood. By constructing the unbalanced panel data of household investment, this study discusses the dynamic changes and influencing factors of household investment, which will lay a foundation for further research and provide a reference for decision-making.

Based on 3,500 samples from rural households in the provinces of Fujian, Hunan, Yunnan, Shaanxi, Jiangxi, Gansu, and Liaoning collected during field investigations from 2010 to 2015, this study conducts an empirical analysis of the household investment in forestry management and its factors with nonbalanced panels.

According to the analysis, the average investment in forestry management per household from 2010 to 2015 fluctuates greatly; the age of the householder, increased forestry area, subsidies, joining professional cooperatives, and forest tenure mortgage show positive effects on achieving the objectives.

The discussions are drawn from the study that supporting policies such as the forest tenure transfer system, professional cooperatives, financial services and subsidies should be further improved to sustain a positive in the forestry industry.

Molecular dynamics is an emerging simulation technique in the field of machining in recent years. Many researchers have tried to simulate different processing methods of various materials with the theory of molecular dynamics (MD), and some preliminary conclusions have been obtained. However, the application of MD simulation is more limited compared with traditional finite element model (FEM) simulation technique due to the complex modeling approach and long computation time. Therefore, more studies on the MD simulations are required to provide a reliable theoretical basis for the nanoscale interpretation of grinding process. This study investigates the crystal structures, dislocations, force, temperature and subsurface damage (SSD) in the grinding of iron-nickel alloy using MD analysis.

In this study the simulation model is established on the basis of the workpiece and single cubic boron nitride (CBN) grit with embedded atom method and Morse potentials describing the forces and energies between different atoms. The effects of grinding parameters on the material microstructure are studied based on the simulation results.

When CBN grit goes through one of the grains, the arrangement of atoms within the grain will be disordered, but other grains will not be easily deformed due to the protection of the grain boundaries. Higher grinding speed and larger cutting depth can cause greater impact of grit on the atoms, and more body-centered cubic (BCC) structures will be destroyed. The dislocations will appear in grain boundaries due to the rearrangement of atoms in grinding. The increase of grinding speed results in the more transformation from BCC to amorphous structures.

This study is aimed to study the grinding of Fe-Ni alloy (maraging steel) with single grit through MD simulation method, and to reveal the microstructure evolution within the affected range of SSD layer in the workpiece. The simulation model of polycrystalline structure of Fe-Ni maraging steel and grinding process of single CBN grit is constructed based on the Voronoi algorithm. The atomic accumulation, transformation of crystal structures, evolution of dislocations as well as the generation of SSD are discussed according to the simulation results.

The shipper selects a suitable shipping route and plans for a voyage in order to import and export cargo on the basis of published sailing schedules. The reliability of the sailing schedule will influence the shipper’s logistics expense, which means that the logistics costs will depend on the reliability of schedules published by container shipping companies. Therefore, it is important to consider factors which can cause delays would for container ships sailing on sea routes. The reliability of published sailing schedules can be affected by a number of different factors. This study adopts the multi-criteria decision making (MCDM) method to estimate the importance of the delaying factors in a sailing schedule. In addition, the consistent fuzzy preference relations (CFPR) method is applied to identify the subjective importance (weights) of the delaying factors. The entropy weight method combined with the actual performance of the container shipping company are both used when estimating the objective importance (weights) of the delaying factors. According to the analysis results, the criteria can be divided into four quadrants with different management implications, which indicate that instructions for chase strategy, sailing schedule control, fleet allocation, transship operation arrangement and planning for ports in routes are often ignored by container shipping companies. Container shipping companies should consider adjusting their operational strategies, which would greatly improve their operational performance.

Francois Quesnay, known as the “Confucius of Europe”, was profoundly influenced by traditional Chinese culture to form his thoughts, which contained strong Chinese characteristics. This paper aims to examine economic thought of Francois Quesnay from the perspective of the construction of socialist political economics with Chinese characteristics.

Moreover, his thoughts also profoundly influenced subsequent economists, such as Adam Smith and Karl Marx. It can be said that Francois Quesnay was at the intersection of Chinese, Western and Marxist thought systems, so it is quite important to examine his thoughts critically and conduct source-tracing in China.

Hence, in the process of constructing and developing socialist political economy with Chinese characteristics, there is an urgent need to focus on exploring the value of excellent traditional Chinese culture at the theoretical level and combining the development and dissemination of the history of thoughts and the historical position of Chinese reality to realize the innovation and development of socialist political economy with Chinese characteristics.

Meanwhile, while absorbing nutrition from excellent traditional Chinese culture, it is necessary to establish scientific coordinates rather than use the discourse systems and paradigms of Western economics to interpret ancient Chinese economic thoughts. It is necessary to adhere to, inherit and develop Marxist political economy and absorb nutrition from Chinese excellent traditional culture to construct socialist political economy with Chinese characteristics.