Search results

This study aims to model power demand and energy consumption of fused filament fabrication (FFF) for carbon fiber-reinforced polyether-ether-ketone (CFR-PEEK) based on a material addition rate (MAR), which is affected by process parameter changes in an FFF machine. Moreover, a virtual additive manufacturing (AM) plant handling multiple FFF machines and part designs is simulated to compare the energy and production dynamics of operational strategies that treat part orders differently based on their inherent MAR.

A full-factorial design of experiments considering major FFF parameters (i.e., layer thickness and printing speed) is planned to fabricate CFR-PEEK samples for each process parameter combination. Then, the MAR of each process parameter combination is calculated to derive regression models for average power demand and total energy consumption. Furthermore, a discrete-event simulation model for a virtual AM system of aircraft parts is built to analyze changes in power demand and energy consumption along with order lead time and production volume under three operational strategies (i.e., higher MAR first-out, first-in-first-out, and lower MAR first-out).

The MAR of FFF for CFR-PEEK plays a key role in energy dynamics in which a decrease in energy consumption dominates over an increase in power demand as the MAR increases. Furthermore, preferentially processing parts with a higher MAR in the AM system is the most beneficial strategy in both energy consumption and productivity.

The findings from this study show that the energy performance of CFR-PEEK applications in FFF should be understood with the MAR of an AM system because the impact of AM complexity on energy performance can be operationally controlled by managing the MAR of part orders for the entire AM system.

As newer high performance polymers in mechanical properties become available for material extrusion-based additive manufacturing, determining infill parameter settings becomes more important to achieve both operational and mechanical performance of printed outputs. For the material extrusion of carbon fiber reinforced poly-ether-ether-ketone (CFR-PEEK), this study aims not only to identify the effects of infill parameters on both operational and mechanical performance but also to derive appropriate infill settings through a multicriteria decision-making process considering the conflicting effects.

A full-factorial experimental design to investigate the effects of two major infill parameters (i.e. infill pattern and density) on each performance measure (i.e. printing time, sample mass, energy consumption and maximum tensile load) is separately performed to derive the best infill settings for each measure. Focusing on energy consumption for operational performance and maximum tensile load for mechanical performance, the technique for order preference by similarity to ideal solution is further used to identify the most appropriate infill settings given relative preferences on the conflicting performance measures.

The results show that the honeycomb pattern type with 25% density is consistently identified as the best for the operational performance measures, while the triangular pattern with 100% density is the best for the mechanical performance measure. Moreover, it is suggested that certain ranges of preference weights on operational and mechanical performance can guide the best parameter settings for the overall material extrusion performance of CFR-PEEK.

The findings from this study can help practitioners selectively decide on infill parameters by considering both operational and mechanical aspects and their possible trade-offs.

This study aims to identify the effects of infill patterns and infill percentages on the energy consumption (EC) of fused filament fabrication (FFF). With increasing attention on carbon-fiber-reinforced–poly-ether-ether-ketone (CFR-PEEK) for practical applications in FFF, infill pattern and infill percentage for FFF can be properly controlled to achieve better energy performance of CFR-PEEK outputs. However, the effects of infill parameters on EC for FFF using CFR-PEEK have not been clearly addressed yet.

Using a full factorial experimental design, six types of infill patterns (rectilinear, grid, triangular, wiggle, fast honeycomb and full honeycomb) and four different infill percentages (25%, 50%, 75% and 100%) were considered for a design of experiments with three replicates. Then, analysis of variance, Tukey test and regression analysis were performed to investigate both the effects of infill pattern and infill percentage on energy performance during FFF.

EC is characterized to be high for the wiggle and triangular patterns and low for the rectilinear pattern during both the printing stage and the entire process. The wiggle pattern results in the greatest increase in EC, whereas the rectilinear pattern leads to the least increase in EC. Although EC during the FFF process increases as the infill percentage increases, the average power demand during the printing stage decreases.

Both the main and interaction effects of infill pattern and infill percentage are investigated to estimate EC and power during the different process stages of FFF.

The potential implications of the three-dimensional printing (3DP) technology are growing enormously in the various health-care sectors, including surgical planning, manufacturing of patient-specific implants and developing anatomical models. Although a wide range of thermoplastic polymers are available as 3DP feedstock, yet obtaining biocompatible and structurally integrated biomedical devices is still challenging owing to various technical issues.

Polyether ether ketone (PEEK) is an organic and biocompatible compound material that is recently being used to fabricate complex design geometries and patient-specific implants through 3DP. However, the thermal and rheological features of PEEK make it difficult to process through the 3DP technologies, for instance, fused filament fabrication. The present review paper presents a state-of-the-art literature review of the 3DP of PEEK for potential biomedical applications. In particular, a special emphasis has been given on the existing technical hurdles and possible technological and processing solutions for improving the printability of PEEK.

The reviewed literature highlighted that there exist numerous scientific and technical means which can be adopted for improving the quality features of the 3D-printed PEEK-based biomedical structures. The discussed technological innovations will help the 3DP system to enhance the layer adhesion strength, structural stability, as well as enable the printing of high-performance thermoplastics.

The content of the present manuscript will motivate young scholars and senior scientists to work in exploring high-performance thermoplastics for 3DP applications.