Search results

Occupational safety issues among employees remains a contemporary and omnipresent concern. In developing countries, safety-related problems are amplified, resulting in higher incidences of serious accidents and occupational diseases. This study aims to evaluate employees’ knowledge and attitudes toward occupational health and safety, and how these influence overall occupational health and safety compliance. Ghana’s oil and gas industry provides the contextual backdrop for this research, given it is characterized by high rates of injury.

A positivist and deductive research strategy was used to quantitatively analyze both primary and secondary data sources. A structured survey was administered to industry employees, and multiple linear regression was used to establish the effects of employee’s knowledge and attitude toward occupational health hazards on overall health and safety compliance.

The findings indicate that most employees had both a high level of knowledge and positive attitude toward mitigating occupational health hazards. Moreover, the study reveals that most employees complied with occupational health safety practices. However, the study also reveals that the effect of employees’ knowledge and attitude toward occupational health hazards does not translate into deployment of comprehensive safety practices. Interestingly, female employees were found to be more knowledgeable and compliant with occupational health and safety practices than their male counterparts.

Premised upon the findings, the study recommends: implementation of relevant education and training programs encompassing the proper usage of machinery and equipment, tailored hazard safety training appropriate to specific employee job requirements, effective dissemination of risk information and governance initiatives that enforce strict adherence to correct safety procedures.

The study uniquely examines the influence of employee’s knowledge of health and safety to overall compliance within the oil and gas industry. Cumulatively, the study’s findings and recommendations contribute to improving the occupational health and safety outcomes within the industry.

In 2020, an outbreak of Salmonella Stanley linked to imported dried wood ear mushrooms affected 55 individuals in the United States of America. These mushrooms, commonly used in Asian cuisine, require processing, like rehydration and cutting, before serving. The US Centres for Disease Control and Prevention advise food preparers to use boiling water for rehydration to inactivate vegetative bacterial pathogens. Little is known about how food handlers prepare this ethnic ingredient and which handling procedures could enable Salmonella proliferation.

This study used content analysis to investigate handling practices for dried wood ear mushrooms as demonstrated in YouTube recipe videos and to identify food safety implications during handling of the product. A total of 125 Chinese- and English-language YouTube videos were analysed.

Major steps in handling procedures were identified, including rehydration, cutting/tearing and blanching. Around 62% of the videos failed to specify the water temperature for rehydration. Only three videos specified a water temperature of 100 °C for rehydrating the mushrooms, and 36% of the videos did not specify the soaking duration. Only one video showed handwashing, cleaning and sanitising of surfaces when handling the dried wood ear mushrooms.

This study found that most YouTube videos provided vague and inconsistent descriptions of the rehydration procedure, including water temperature and soaking duration. Food preparers were advised to use boiling water for rehydration to inactivate vegetative bacterial pathogens. However, boiling water alone is insufficient to inactivate all bacterial spores. Extended periods of soaking and storage could be of concern for spore germination and bacterial growth. More validation studies need to be conducted to provide guidance on how to safely handle the mushrooms.

This study will make a distinctive contribution to the field of food safety by being the first to investigate the handling procedure of a unique ethnic food ingredient, dried wood ear mushrooms, which has been linked to a previous outbreak and multiple recalls in the United States of America. The valuable data collected from this study can help target food handling education as well as influence future microbial validation study design and risk assessment.

This article aims to evaluate published food cold chain (FCC) literature against risk management and supply chain sustainability concepts.

The article uses the theory refinement logic proposed by Seuring et al. (2021) to analyze the contents of FCC management-related literature published over the past 20 years. A sample of 116 articles was gathered using Web of Science and subsequently analyzed. The respective articles were then systematically coded against the frameworks of Beske and Seuring (2014) and Vlajic et al. (2012), which focused on building sustainable and robust supply chains, respectively.

The literature review revealed that debates around managing contemporary sources of disruptions/vulnerability and making FCCs more sustainable and resilient are gradually developing. However, an overarching risk management perspective along with incorporating social and environmental dimensions in managing FCCs still needs the adequate attention of the respective research community.

The deductive internal logic of theory refinement approach used in this paper could have been further strengthened by using additional frameworks. This limitation, however, opens avenues for further research. The findings of the paper will stimulate the interest of future researchers to work on expanding our understanding related to sustainability and risk management in FCCs.

The paper is the first attempt to organize published FCC literature along dimensions of supply chain sustainability and risk management. The paper thus provides the respective researchers with a foundation that will help them adopt a focused approach to addressing the research gaps.

This paper explores Lean Six Sigma principles and the DMAIC (define, measure, analyze, improve, control) methodology to propose a new Lean Six Sigma 4.0 (LSS 4.0) framework for employee occupational exams and address the real-world issue of high-variability exams that may arise.

This study uses mixed methods, combining qualitative and quantitative data collection. A detailed case study assesses the impact of LSS interventions on the exam management process and tests the applicability of the proposed LSS 4.0 framework for employee occupational exams.

The results reveal that changing the health service supplier in the explored organization caused a substantial raise in occupational exams, leading to increased costs. By using syntactic interoperability, lean, six sigma and DMAIC approaches, improvements were identified, addressing process deviations and information requirements. Implementing corrective actions improved the exam process, reducing the number of exams and associated expenses.

It is important to acknowledge certain limitations, such as the specific context of the case study and the exclusion of certain exam categories.

The practical implications of this research are substantial, providing organizations with valuable managerial insights into improving efficiency, reducing costs and ensuring regulatory compliance while managing occupational exams.

This study fills a research gap by applying LSS 4.0 to occupational exam management, offering a practical framework for organizations. It contributes to the existing knowledge base by addressing a relatively novel context and providing a detailed roadmap for process optimization.

This article aims to address the need for a more structured partnership between civilian and military healthcare, particularly in the context of cross-border threats in the EU. While both systems are driven by the same goal of providing high-quality healthcare services and achieving optimal patient outcomes, they operate under different national approaches and resources.

Two recent crises are presented as examples that highlight the necessity of cooperation between civilian and military medical systems. The Covid-19 Pandemic and the Ukrainian Conflict are described based on the experience gathered by the author as a member of the NATO Centre of Excellence for Military Medicine and form the base to shape a broader perspective on the future of civil-military interaction in healthcare at the European Union level.

The ability to deliver coordinated responses during crises depend on the level of interoperability, preparation and mutual understanding. To improve synergies, a structured partnership should be established, prioritizing common standards of care and shared best practices. Integrating military and civilian healthcare pathways can be especially beneficial in situations where patients are moved from the point of injury or sickness across different military and civilian structures to receive the most appropriate treatment and rehabilitation for their conditions.

The relationship between military and civilian healthcare systems is often discussed at multinational level, but a clear focus is lacking concerning their shared mission, distinct functions and potential for cross-border collaboration.

Firefighter Personal Protective Equipment (PPE) is the only barrier between the firefighter and hazardous environment. Gloves are a crucial component of the multi-component PPE. Over time the gloves have reduced the intensity of hand injuries, yet further improvement in terms of material selection and glove design is required to strike the balance between protection and comfort. Focusing on the material aspect, the purpose of this study is to present literature analysis on material selection and testing for firefighter gloves.

The study conducted a literature analysis on material selection and characterization of firefighter PPE. The review summarizes and evaluates past work addressing the characterization of firefighter gloves in accordance with NFPA 1971 requirements and points out found research gaps to aid with foundation of future research.

The study summarizes several research works to inform readers about the material selection and characterization of firefighter gloves. Based on the analyzed literature, the study resulted in material specification sheets for firefighter gloves. The developed material specification sheets provide information in terms of crucial material properties to be incorporated for accurate functioning of firefighter gloves, testing methods to validate those material properties and materials from analyzed literature exhibiting desired properties.

With large research addressing firefighter PPE, only limited studies focus specifically on gloves. Thus, this study provides a literature analysis covering material selection and testing for gloves. A consolidated firefighter gloves material specification document, which does not appear to be available in the literature, will provide a foundation for the development and characterization of firefighter gloves to better serve the functions along with ensuring user comfort.

Agricultural waste and food sources are some of the pollutants of the environment. One of these wastes is the peel of fruits that cannot be consumed as food. In this regard, walnut husk (WH) and oleaster peel (PO) are known as two important sources of tannin and are bulky wastes. Because of the high percentage of tannin, these materials can be used as a natural source for the preparation of bio-mordant in the dyeing process.

In this study, Reseda and Madder were used as natural dyes in the presence of a mixture of two bio-mordants. WH and PO were selected as bio-mordant. All natural resources are extracted to obtain the juice. The phenolic percentage of tannin-containing extracts was evaluated and then it was used for wool yarns by premordanting method. The results of evaluating the fastness properties using the ISO method.

The most important achievement of this research is the use of agricultural waste in the dyeing process to reduce environmental pollution and create added value. All compounds rich in tannin have some phenolic components, therefore the amount of phenolic content of these extracts was evaluated. The effect of mixing the mordant on the color characteristics of the yarns was investigated and the results showed that changing the ratio of the combination of two mordant is effective on the K/S values. The results of evaluating the fastness properties using the ISO method showed that the washing, rubbing and light fastness in the presence of mordant is good, good and moderate, respectively.

In this paper, to the best of the authors’ knowledge, for the first time, the combination of two natural extracts obtained from agricultural waste has been used to create a new bio-mordant on fibers and improve stability.

This paper aims to explore how the phenomena of corruption and fraud in the public sector have been portrayed in the literature using the Audit Society Framework (Power, 1997).

The authors conducted a structured literature review (Massaro et al., 2016) to unveil relevant literature in the area of corruption and fraud in the public sector.

Results highlight that the literature using “The Audit Society” theory is still scant. Notwithstanding the call for a more decisive role of auditors in fighting corruption and fraud, much is still to be discovered about consequences of auditing and what “good quality” is.

The main limitation is that only literature in English has been included.

This paper helps practitioners and policymakers to take and implement informed decisions with regards to the fight against fraud and corruption.

In calling for more research in the domain of audit, fraud and corruption in the public sector, this paper promotes a higher focus of society on public interest and the common good.

This paper investigates one part of The Audit Society related to corruption and fraud, topics that are still very underdeveloped and unexplored by researchers. From the findings the authors suggest possible new avenues for further research.

Pandemics are a serious challenge for humanity, as their social and economic impacts can be tremendous. This study aims to understand how innovation based in the sharing economy (SE) business models can contribute to overcoming the challenges arising from the Covid-19 pandemic.

Following a netnographic approach, the authors studied the computer-mediated social interactions of internet-based virtual innovation communities.

This study found that the SE business models contribute to overcome the challenges of the Covid-19 pandemic by redistributing idle resources to lessen the impacts of confinement. This was achieved through process innovations and an innovative use of the network, which enabled fast-open and decentralized innovation processes, and quick implementation of innovations. This innovation process is based on a decentralized decision-making approach, clear rules, informal relationship among community members and open communication channels, as well as in evasive strategies to avoid facing challenges, institutional restrictions and barriers in the adoption of innovations.

This study was limited to a virtual innovation community of highly specialized and educated experts and nine community projects focused on institutional contexts of a developed country. Future research should focus on the institutional contexts of less specialized communities and developing countries and study other community innovation projects in pandemics to understand the processes of fast-open, decentralized and evasive innovation and the importance of relational capabilities for innovation in digital contexts.

The findings can guide innovation managers and public policymakers in implementing effective strategies and policies to overcome pandemic challenges using SE business models. This research also provides important insights into the types and processes of innovation in organizations that create solutions to overcome social and business challenges during pandemics. In addition, this study highlights the contributions of netnographic approaches to conducting research on innovation and in pandemic periods when measures of confinement are in place.

This study uses an innovative framework to map the types of innovation and highlights two different types of innovation processes.

The purpose of this study is to identify LGBTQ+ perceptions of and experiences with hazards, vulnerabilities and disasters in the San Francisco Bay Area in the USA and to co-develop applied projects to “queer” disaster knowledge production and risk reduction activities in the region.

This is a community science project in which we collaborate with community members to enhance both community and scientific knowledge with the goal of utilizing it to produce a positive change to pressing social issues and their underlying causes. We do this through a series of four focus group workshops to identify community priorities, hazards, vulnerabilities and local action. We follow this with further ethnographic research and projects to apply findings from phase one.

The authors have found that: LGBTQ+ people in the Bay Area have unique experiences with hazards, vulnerabilities and disasters; there are significant gaps in the representation of LGBTQ+ hazard exposure in local scientific models that we can address through alternative methodologies; and tabletop exercises, learning modules and podcasts help orient and train disaster response agencies and personnel on LGBTQ+ inclusive operations.

This initiative entails novel approaches to community science for disaster risk reduction and creative collaboration with community-based organizations to foster the development of LGBTQ+ inclusive disaster risk reduction and response.