Search results

This paper establishes a quality model for automation assembly of range hood impeller based on generalized grey relational degree, it improves the debugging efficiency of the newly developed assembly workstation.

First, spot check the trial production impellers and obtain three indexes that reflect the assembly quality of the impellers. Then, analyze the parameters that affect the assembly quality of the impeller using grey relational analysis (GRA), establish a model for the assembly quality of the range hood impeller based on the generalized grey relational degree and identify the main parameters. After that, analyze the transmission structure of automation assembly workstation, identify the reasons that affect parameters and propose improvement plans. Finally, a trial production is conducted on the automation assembly workstation after adopting the improved plan to verify the quality model of impeller automation assembly.

The research shows that compared to manual assembly, the automation assembly quality of the impeller using GRA model has been improved, shortening the debugging cycle of the newly developed assembly workstation.

The newly developed automation equipment will have some problems in the trial production stage, which often rely on the experience of engineers for debugging. In this paper, the automation assembly quality model of range hood impeller based on GRA is established, which can not only ensure the quality of finished impeller but also shorten the debugging cycle of the equipment. In addition, GRA can be widely used in the commissioning of other automation equipment.

This study has developed a set of impeller automation assembly workstation. The debugging method in the trial production stage is beneficial to shorten the trial production time and improve the economic benefits.

This paper aims to investigate the effect of different beam distance by understanding laser beam influence on solder joint quality. The utilisation numerical-based simulations and experimental validation will help to minimise the formation of micro void in PTH that can lead to cracks and defects on passive devices.

The research uses a combination approach of numerical-based simulation using Finite Volume Method (FVM) and experimental validation to explore the impact of different laser beam distances on solder joint quality in PTH assemblies. The study visualises solder flow and identifies the optimal beam distance for placing a soldering workpiece and a suitable tolerance distance for inserting the solder wire.

The simulation results show the formation of micro void that occurs in PTH region with low volume fraction and unbalance heat concentration profile observed. The experimental results indicate that the focus point of the laser beam at a 99.0 mm distance yields the smallest beam size. Simulation visualisation demonstrates that the laser beam’s converging area at +4.6 mm from the focus point which provides optimal tolerance distances for placing the solder wire. The high-power laser diode exhibits maximum tolerance distance at 103.6 mm from the focus point where suitable beam distance for positioning of the soldering workpiece with 50% laser power. The simulation results align with the IPC-A-610 standard, ensuring optimal filling height, fillet shape with a 90° contact angle and defect-free.

This research provides implications for the industry by demonstrating the capability of the simulation approach to produce high-quality solder joints. The parameters, such as beam distance and power levels, offer practical guidelines for improving laser soldering processes in the manufacturing industry.

This study contributes to the field by combining high-power laser diode technology with numerical-based simulations to optimise the beam distance parameters for minimising micro void formation in the PTH region.

This study aims to develop an optimal tolerance allocation strategy involves integrating the unique transfer (UT) approach and the difficulty coefficient evaluation (DCE) routine in an interactive hybrid method. This method combines the strengths of both UT and DCE, ensuring simultaneous utilization for enhanced performance. The proposed tolerancing model manifests an integrated computer-aided design (CAD) tool.

By combining UT and DCE based on failure mode, effects and criticality analysis (FMECA) tool and the Ishikawa diagram, the proposed collaborative hybrid tool ensures an efficient and optimal tolerance allocation approach. The integration of these methodologies not only addresses specific transfer challenges through UT but also conducts a thorough evaluation of difficulty coefficients via DCE routine using reliability analysis tools as FMECA tool and the Ishikawa diagram. This comprehensive framework contributes to a robust and informed decision-making process in tolerance allocation, ultimately optimizing the design and manufacturing processes.

The presented methodology is implemented with the aim of generating allocated tolerances that align with specific difficulty requirements, facilitating the creation of a mechanical assembly characterized by high quality and low cost. To substantiate and validate the conceptual framework and methods, an integrated tool has been developed, featuring a graphical user interface (GUI) designed in MATLAB. This interface serves as a platform to showcase various interactive and integrated tolerance allocation approaches that adhere to both functional and manufacturing prerequisites. The proposed integrated tool, designed with a GUI in MATLAB, offers the capability to execute various examples that effectively demonstrate the benefits of the developed tolerance transfer and allocation methodology.

The originality of the proposed approach is the twining between the UT and DCE simultaneous in an integrated and concurrent tolerance transfer and allocation model. Therefore, the proposed approach is named an integrated CAD/tolerance model based on the manufacturing difficulty tool. The obtained results underscore the tangible advantages stemming from the integration of this innovative tolerance transfer and allocation approach. These benefits include a notable reduction in total cost and a concurrent enhancement in product quality.

India liberalized its economy in 1991, which resulted in intense global competition, quality-conscious and demanding customers. Additionally, significant technological advancements lead to enhancements in products and processes. These forced Indian organizations to adopt innovative business strategies in the past 30 years. Meanwhile, the Lean Six Sigma methodology has significantly grown with vast applicability during the past 30 years. Thus, the purpose of this study is to develop the learning on Lean Six Sigma methodology in the Indian context through investigation of literature.

A three-stage systematic literature review approach was adopted to investigate the literature during the present study. In total, 187 articles published in 62 journals/conference proceedings from 2005 to 2022 (18 years) were shortlisted. The first part of the article summarizes the significant milestones towards the quality journey in the Indian context, along with the evolution of the Lean Six Sigma methodology. The second part examines the shortlisted papers on Lean Six Sigma frameworks, their applicability in industrial sectors, performance metrics, outcomes realized, publication trends, authorship patterns and leading researchers from the Indian perspective.

Lean Six Sigma has emerged as a highly acclaimed and structured business improvement strategy worldwide. The Indian economy has seen remarkable growth in the past decade and is one of the fastest-growing economies in the 21st century. Lean Six Sigma implementation in India has significantly increased from 2014 onward. The study revealed that researchers have proposed several different frameworks for Lean Six Sigma implementation, the majority of which are conceptual. Furthermore, the balanced applicability of Lean Six Sigma in manufacturing and service sectors was observed with the highest implementation in the health-care sector. Additionally, the widely adopted tools, techniques along with performance metrics exploring case studies were reported along with a summary of eminent and leading researchers in the Indian context.

This study is confined to reviewed papers as per the research criteria with a significant focus on the Indian context and might have missed some papers due to the adopted papers selection strategy.

The present study is one of the initial attempts to investigate the literature published on Lean Six Sigma in the Indian context, including perspective on the Indian quality movement. Therefore, the present study will provide an understanding of Lean Six Sigma methodology in the Indian context to graduating students in engineering and management and entry-level executives. The analysis and findings on Lean Six Sigma frameworks, research approach, publications details, etc., will be helpful to potential research scholars and academia. Additionally, analysis of case studies on Lean Six Sigma implementation by Indian industries will assist the managers and professionals in decision making.

The purpose of the current study is development of effective and fast algorithm for optimization the arrangement of temporary fasteners during aircraft assembly.

Combinatorial nature, uncertain input data, sensitivity to mechanical properties and geometric tolerances are the specific features of the fastening optimization problem. These characteristics make the problem-solving by standard methods very resource-intensive because the calculation of the objective function requires multiple solution of contact problems. The work provides an extended description of the geodesic algorithm (GA) which is a novel non-iterative optimization approach avoiding multiple objective function calculations.

The GA makes it possible to optimize the arrangement of temporary fasteners during the different stages of the assembly process. The objective functions for the optimization are number of installed fasteners and quality of contact between joined parts. The mentioned properties of the GA also make it possible to introduce an automatic procedure for optimizing fastener arrangement into everyday practice of aircraft manufacturing.

The algorithm has been applied to optimization of the assembly process in Airbus company.

Performance of the GA is orders of magnitude greater than standard optimization algorithms while maintaining the quality of results. The use of the assembly process specifics is the main limitation of the GA, because it cannot be automatically applied to optimization problems in other areas. High speed of work and quality of the results make it possible to use it for real optimization problems on assembly line in the production of commercial airliners.

This paper recommends a method entitled “SMED 4.0” as a development of conventional single minute exchange of die (SMED) to avoid defect occurrence during production and improve sustainability, besides reducing setup time.

The method builds upon an extensive literature review and in-depth explorative research in SMED and zero defect manufacturing (ZDM). SMED 4.0 incorporates an evolutionary stage that employs predict-prevent strategies using Industry 4.0 technologies including the Internet of Things (IoT) and machine learning (ML) algorithms.

It presents the applicability of the proposed approach in (1) identifying the triple bottom line (TBL) criteria, which are affected by defects; (2) predicting the time of defect occurrence if any; (3) preventing defective products by performing online setting on machines during production as needed; (4) maintaining the desired quality of the product during the production and (5) improving TBL sustainability in manufacturing processes.

The extended view of SMED 4.0 in this research, as well as its analytical approach, helps practitioners develop their SMED approaches in a more holistic way. The practical application of SMED 4.0 is illustrated by implementing it in a real-life manufacturing case.

This paper uses dialectical inquiry to explore tensions that arise when adopting Industry 4.0 technologies in a lean production system and their reconciliation mechanisms.

We conducted an in-depth qualitative case study over a 3-year period on an Italian division of an international electrotechnical organisation that produces electrical switches. This organisation successfully adopted Industry 4.0 technologies in a lean production system. The study is based on primary data such as observations and semi-structured interviews, along with secondary data.

We identify four empirically validated dialectic tensions arising across different Industry 4.0 adoption stages due to managers’ and workers’ contrasting interpretations of technologies. Consequently, we define the related reconciliation mechanisms that allow the effective adoption of various Industry 4.0 technologies to support a lean production system.

This is the first empirical investigation of tensions in the adoption of Industry 4.0 technologies in a lean production system. Furthermore, the paper presents four theoretical propositions and a conceptual model describing which tensions arise during the adoption of Industry 4.0 technologies in a lean production system and the reconciliation mechanisms that prevent lean production system deterioration.

This research paper aims to analyze the scientific and grey literature on Quality 4.0 and zero-defect manufacturing (ZDM) frameworks to develop an integrated quality 4.0 framework (IQ4.0F) for quality improvement (QI) based on Six Sigma and machine learning (ML) techniques towards ZDM. The IQ4.0F aims to contribute to the advancement of defect prediction approaches in diverse manufacturing processes. Furthermore, the work enables a comprehensive analysis of process variables influencing product quality with emphasis on the use of supervised and unsupervised ML techniques in Six Sigma’s DMAIC (Define, Measure, Analyze, Improve and Control) cycle stage of “Analyze.”

The research methodology employed a systematic literature review (SLR) based on PRISMA guidelines to develop the integrated framework, followed by a real industrial case study set in the automotive industry to fulfill the objectives of verifying and validating the proposed IQ4.0F with primary data.

This research work demonstrates the value of a “stepwise framework” to facilitate a shift from conventional quality management systems (QMSs) to QMSs 4.0. It uses the IDEF0 modeling methodology and Six Sigma’s DMAIC cycle to structure the steps to be followed to adopt the Quality 4.0 paradigm for QI. It also proves the worth of integrating Six Sigma and ML techniques into the “Analyze” stage of the DMAIC cycle for improving defect prediction in manufacturing processes and supporting problem-solving activities for quality managers.

This research paper introduces a first-of-its-kind Quality 4.0 framework – the IQ4.0F. Each step of the IQ4.0F was verified and validated in an original industrial case study set in the automotive industry. It is the first Quality 4.0 framework, according to the SLR conducted, to utilize the principal component analysis technique as a substitute for “Screening Design” in the Design of Experiments phase and K-means clustering technique for multivariable analysis, identifying process parameters that significantly impact product quality. The proposed IQ4.0F not only empowers decision-makers with the knowledge to launch a Quality 4.0 initiative but also provides quality managers with a systematic problem-solving methodology for quality improvement.

This study aims to investigate the possible defects and their root causes in a soft-termination multilayered ceramic capacitor (MLCC) when subjected to a thermal reflow process.

Specimens of the capacitor assembly were subjected to JEDEC level 1 preconditioning (85 °C/85%RH/168 h) with 5× reflow at 270°C peak temperature. Then, they were inspected using a 2 µm scanning electron microscope to investigate the evidence of defects. The reliability test was also numerically simulated and analyzed using the extended finite element method implemented in ABAQUS.

Excellent agreements were observed between the SEM inspections and the simulation results. The findings showed evidence of discontinuities along the Cu and the Cu-epoxy layers and interfacial delamination crack at the Cu/Cu-epoxy interface. The possible root causes are thermal mismatch between the Cu and Cu-epoxy layers, moisture contamination and weak Cu/Cu-epoxy interface. The maximum crack length observed in the experimentally reflowed capacitor was measured as 75 µm, a 2.59% difference compared to the numerical prediction of 77.2 µm.

This work's contribution is expected to reduce the additional manufacturing cost and lead time in investigating reliability issues in MLCCs.

Despite the significant number of works on the reliability assessment of surface mount capacitors, work on crack growth in soft-termination MLCC is limited. Also, the combined experimental and numerical investigation of reflow-induced reliability issues in soft-termination MLCC is limited. These cited gaps are the novelties of this study.

This paper aims to prepare Poly(Styrene-Butyl acrylate-Methacrylic acid) @Poly Gallic acid-Fe³⁺ photonic crystal composite inks [P(St-BA-MAA)@PGA-Fe³⁺ PCCI, @ means the PGA-Fe³⁺ is loaded on the microspheres] and construct noniridescent structural colors on fabric substrates, with the goal of improving the visibility of structural colors.

P(St-BA-MAA)@PGA-Fe³⁺ PCCI were prepared by coating P(St-BA-MAA) microspheres with a metal-polyphenol network formed by gallic acid (GA, C₇H₆O₅) and Fe³⁺. The assembly effects of the inks were explored under different conditions, including pH, temperature, concentration and surface tension. The optimal self-assembly conditions of the inks were determined using the controlled variable method.

The results demonstrated the successful preparation of P(St-BA-MAA)@PGA-Fe³⁺ PCCI. The metal polyphenol network film composed of GA and Fe³⁺ was successfully coated on the surface of P(St-BA-MAA) seed microspheres. The assembly mechanism of the inks was investigated, indicating that at a diethylene glycol (DEG, C₄H₁₀O₃) concentration of 0.3 wt% and pH of 7, bright noniridescent structural colors could be formed on fabric surfaces after self-assembly by PCCI at 60 °C for 10 min. Furthermore, the mechanical fastness of the structural colors was enhanced due to the adherence of the soft shell composed of P(St-BA-MAA) and GA.

Utilizing a cost-effective approach and a diverse array of readily available raw materials, we have successfully prepared P(St-BA-MAA)@PGA-Fe³⁺ PCCI, which boasts superior performance and offers fabrics a range of unique coloring styles. This innovation paves the way for potential applications of structural colors in practical production, thereby broadening their realm of utility.