Search results

This study aims to analyze the two-dimensional ferrofluid flow in porous media. The effects of changes in parameters such as permeability parameter, buoyancy parameter, Reynolds and Prandtl numbers, radiation parameter, velocity slip parameter, energy dissipation parameter and viscosity parameter on the velocity and temperature profile are displayed numerically and graphically.

By using simplification, nonlinear differential equations are converted into ordinary nonlinear equations. Modeling is done in the Cartesian coordinate system. The finite element method (FEM) and the Akbari-Ganji method (AGM) are used to solve the present problem. The finite element model determines each parameter’s effect on the fluid’s velocity and temperature.

The results show that if the viscosity parameter increases, the temperature of the fluid increases, but the velocity of the fluid decreases. As can be seen in the figures, by increasing the permeability parameter, a reduction in velocity and an enhancement in fluid temperature are observed. When the Reynolds number increases, an increase in fluid velocity and temperature is observed. If the speed slip parameter increases, the speed decreases, and as the energy dissipation parameter increases, the temperature also increases.

When considering factors like thermal conductivity and variable viscosity in this context, they can significantly impact velocity slippage conditions. The primary objective of the present study is to assess the influence of thermal conductivity parameters and variable viscosity within a porous medium on ferrofluid behavior. This particular flow configuration is chosen due to the essential role of ferrofluids and their extensive use in engineering, industry and medicine.

The present work involves analytical and experimental investigation of sloshing in a two-dimensional rectangular tank including the effect of porous baffles to control and/or reduce the wave motion in the sloshing tank. The purpose of this study is to assess the analytical solutions of the drag coefficient effect on porous baffles performance to track free surface motion variation in the sloshing tank by comparison with experimental shake table tests under a range of sway excitation.

The linear second-order ordinary differential equations for liquid sloshing in the rectangular tank were solved using Newmark’s beta method and obtained the analytical solutions for liquid sloshing with dual vertical porous baffles of full submergence depths in a sway-oscillated rectangular tank following the methodology similar to Warnitchai and Pinkaew (1998) and Tait (2008).

The porous baffles significantly reduce wave elevation in the varying filled levels of the tank compared to the baffle-free tank under the range of excitation frequencies. It is observed that the Reynolds number-dependent drag coefficient for porous baffles in the tank can significantly reduce the sloshing elevations and is found to be effective to achieve higher damping compared to the porosity-dependent drag coefficient for porous baffles in the sloshing tank. The analytical model’s response to free surface elevation variations in the sloshing tank was compared with the experiment’s test results. The analytical results matched with shake table test results with a quantitative difference near the first resonant frequency.

The scope of the study is limited to porous baffles performance under range sway motion and three different filling levels in the tank. The porous baffle performance includes Reynolds number dependent drag coefficient to explore the damping effect in the sloshing tank.

The porous baffles with low-level porosities in the sloshing tank have many engineering applications where the first resonant mode of sloshing in the tank is more important. The porous baffle drag coefficient is an important parameter to study the baffle’s damping effect in sloshing tanks. Hence, obtained analytical solution for liquid sloshing in the rectangular tank with Reynolds number as well as porosity-dependent drag coefficient (model 1) and porosity-dependent drag coefficient porous baffles (model 2) performance is discussed. The model’s test results were validated using a series of shake table sloshing experiments for three fill levels in the tank with sway motion at various excitation frequencies covering the first four sloshing resonant modes.

The purpose of this paper is to investigate and review the impact of the use of statistical quality control (SQC) development and analytical and numerical methods on average run length for econometric applications.

This study used several academic databases to survey and analyze the literature on SQC tools, their characteristics and applications. The surveys covered both parametric and nonparametric SQC.

This survey paper reviews the literature both control charts and methodology to evaluate an average run length (ARL) which the SQC charts can be applied to any data. Because of the nonparametric control chart is an alternative effective to standard control charts. The mixed nonparametric control chart can overcome the assumption of normality and independence. In addition, there are several analytical and numerical methods for determining the ARL, those of methods; Markov Chain, Martingales, Numerical Integral Equation and Explicit formulas which use less time consuming but accuracy. New ideas of mixed parametric and nonparametric control charts are effective alternatives for econometric applications.

In terms of mixed nonparametric control charts, this can be applied to all data which no limitation in using of the proposed control chart. In particular, the data consist of volatility and fluctuation usually occurred in econometric solutions. Furthermore, to find the ARL as a performance measure, an explicit formula for the ARL of time series data can be derived using the integral equation and its accuracy can be verified using the numerical integral equation.

This study explores the immobilisation of enzymes within porous catalysts of various geometries, including spheres, cylinders and flat pellets. The objective is to understand the irreversible Michaelis-Menten kinetic process within immobilised enzymes through advanced mathematical modelling.

Mathematical models were developed based on reaction-diffusion equations incorporating nonlinear variables associated with Michaelis-Menten kinetics. This research introduces fractional derivatives to investigate enzyme reaction kinetics, addressing a significant gap in the existing literature. A novel approximation method, based on the independent polynomials of the complete bipartite graph, is employed to explore solutions for substrate concentration and effectiveness factor across a spectrum of parameter values. The analytical solutions generated through the bipartite polynomial approximation method (BPAM) are rigorously tested against established methods, including the Bernoulli wavelet method (BWM), Taylor series method (TSM), Adomian decomposition method (ADM) and fourth-order Runge-Kutta method (RKM).

The study identifies two main findings. Firstly, the behaviour of dimensionless substrate concentration with distance is analysed for planar, cylindrical and spherical catalysts using both integer and fractional order Michaelis-Menten modelling. Secondly, the research investigates the variability of the dimensionless effectiveness factor with the Thiele modulus.

The study primarily focuses on mathematical modelling and theoretical analysis, with limited experimental validation. Future research should involve more extensive experimental verification to corroborate the findings. Additionally, the study assumes ideal conditions and uniform catalyst properties, which may not fully reflect real-world complexities. Incorporating factors such as mass transfer limitations, non-uniform catalyst structures and enzyme deactivation kinetics could enhance the model’s accuracy and broaden its applicability. Furthermore, extending the analysis to include multi-enzyme systems and complex reaction networks would provide a more comprehensive understanding of biocatalytic processes.

The validated bipartite polynomial approximation method presents a practical tool for optimizing enzyme reactor design and operation in industrial settings. By accurately predicting substrate concentration and effectiveness factor, this approach enables efficient utilization of immobilised enzymes within porous catalysts. Implementation of these findings can lead to enhanced process efficiency, reduced operating costs and improved product yields in various biocatalytic applications such as pharmaceuticals, food processing and biofuel production. Additionally, this research fosters innovation in enzyme immobilisation techniques, offering practical insights for engineers and researchers striving to develop sustainable and economically viable bioprocesses.

The advancement of enzyme immobilisation techniques holds promise for addressing societal challenges such as sustainable production, environmental protection and healthcare. By enabling more efficient biocatalytic processes, this research contributes to reducing industrial waste, minimizing energy consumption and enhancing access to pharmaceuticals and bio-based products. Moreover, the development of eco-friendly manufacturing practices through biocatalysis aligns with global efforts towards sustainability and mitigating climate change. The widespread adoption of these technologies can foster a more environmentally conscious society while stimulating economic growth and innovation in biotechnology and related industries.

This study offers a pioneering approximation method using the independent polynomials of the complete bipartite graph to investigate enzyme reaction kinetics. The comprehensive validation of this method through comparison with established solution techniques ensures its reliability and accuracy. The findings hold promise for advancing the field of biocatalysts and provide valuable insights for designing efficient enzyme reactors.

The purpose of the study is to analytically as well as numerically investigate the weight of throughflow on the onset of Casson nanofluid layer in a permeable matrix. This study examines both the marginal and over stable kind of convective movement in the system.

A double-phase model is used for Casson nanofluid, which integrates the impacts of thermophoresis and Brownian wave, whereas for flow in the porous matrix the altered Darcy model is occupied under the statement that nanoparticle flux is disappear on the boundaries. The resultant eigenvalue problem is resolved analytically as well as numerically with the help of Galerkin process with the Casson nanofluid Rayleigh–Darcy number as the eigenvalue.

The findings revealed that the throughflow factor postpones the arrival of convective flow and reduces the extent of convective cells, whereas the Casson factor, the Casson nanoparticle Rayleigh–Darcy number and the reformed diffusivity ratio promote convective motion and also decrease the extent of convective cells.

Controlling the convective movement in heat transfer systems that generate high heat flux is a real mechanical challenge. The proposed framework proved that the use of throughflow is one of the most important ways to control the convective movement in Casson nanofluid. To the best of the authors’ knowledge, no inspection has been established in the literature that studies the outcome of throughflow on the Casson nanofluid convective flow in a porous medium layer. However, the convective flow of Casson nanofluid finds many applications in improving heat transmission and energy efficiency in a range of thermal systems, such as the cooling of heat-generating elements in electronic devices, heat exchangers, pharmaceutical practices and hybrid-powered engines, where throughflow can play a significant role in controlling the convective motion.

This study aims to enhance an enterprise’s private cloud services by optimally determining the ownership of cloud computing resources and responsibility for maintenance and operations. The core objective is to identify the most cost-effective private cloud deployment model at the intersection of technology and business considerations.

This study evaluates three ownership and responsibility models, each encompassing decisions related to candidate data center locations, resource provisioning, and demand placements. Drawing from the cloud computing literature, these models are referred to as deployment models. The research formulates a private cloud deployment model selection problem and introduces an established Lagrangian-relaxation-based optimization approach, combined with a novel greedy relieving-pooling heuristic, to facilitate model selection.

This study identifies the optimal deployment model for a representative instance using real test-bed data from the US, demonstrating the private cloud deployment model selection problem. Various numerical examples are analyzed to explore the influence of environmental parameters. Generally, the virtual PC model is optimal for low demand arrival rates and resource requirements, while the on-premises PC model is preferable for higher values of these parameters. Additionally, the virtual PC model is found to be optimal when enroute latency coefficients are large.

This study contributes to the literature by formulating an optimization problem that integrates performance, financial, and assurance metrics for enterprises. The introduction of a solution approach enables enterprises to make informed decisions regarding ownership and responsibility design. The study effectively bridges the gap between academic research and industry demands from a business perspective.

Intumescent coatings are nowadays a dominant passive system used to protect structural materials in case of fire. Due to their reactive swelling behaviour, intumescent coatings are particularly complex materials to be modelled and predicted, which can be extremely useful especially for performance-based fire safety designs. In addition, many parameters influence their performance, and this challenges the definition and quantification of their material properties. Several approaches and models of various complexities are proposed in the literature, and they are reviewed and analysed in a critical literature review.

Analytical, finite-difference and finite-element methods for modelling intumescent coatings are compared, followed by the definition and quantification of the main physical, thermal, and optical properties of intumescent coatings: swelled thickness, thermal conductivity and resistance, density, specific heat capacity, and emissivity/absorptivity.

The study highlights the scarce consideration of key influencing factors on the material properties, and the tendency to simplify the problem into effective thermo-physical properties, such as effective thermal conductivity. As a conclusion, the literature review underlines the lack of homogenisation of modelling approaches and material properties, as well as the need for a universal modelling method that can generally simulate the performance of intumescent coatings, combine the large amount of published experimental data, and reliably produce fire-safe performance-based designs.

Due to their limited applicability, high complexity and little comparability, the presented literature review does not focus on analysing and comparing different multi-component models, constituted of many model-specific input parameters. On the contrary, the presented literature review compares various approaches, models and thermo-physical properties which primarily focusses on solving the heat transfer problem through swelling intumescent systems.

The presented literature review analyses and discusses the various modelling approaches to describe and predict the behaviour of swelling intumescent coatings as fire protection for structural materials. Due to the vast variety of available commercial products and potential testing conditions, these data are rarely compared and combined to achieve an overall understanding on the response of intumescent coatings as fire protection measure. The study highlights the lack of information and homogenisation of various modelling approaches, and it underlines the research needs about several aspects related to the intumescent coating behaviour modelling, also providing some useful suggestions for future studies.

The design of cantilever pile walls (CPWs) presents several common challenges. These challenges include soil variability, groundwater conditions, complex loading conditions, construction considerations, structural integrity, uncertainties in design parameters and construction and monitoring costs. Accordingly, this paper is to provide a detailed literature review on the design criteria of CPWs, specifically in cohesionless soil. This study aims to present a comprehensive overview of the current state of knowledge in this area.

The paper uses a literature review approach to gather information on the design criteria of CPWs in cohesionless soil. It covers various aspects such as excavation support systems (ESSs), deformation behavior, design criteria, lateral earth pressure calculation theories, load distribution methods and conventional design approaches.

The review identifies and discusses common challenges associated with the design of CPWs in cohesionless soil. It highlights the uncertainties in determining load distribution and the potential for excessive wall deformations. The paper presents various approaches and methodologies proposed by researchers to address these challenges.

The paper contributes to the field of geotechnical engineering by providing a valuable resource for geotechnical engineers and researchers involved in the design and analysis of CPWs in cohesionless soil. It offers insights into the design criteria, challenges and potential solutions specific to CPWs in cohesionless soil, filling a gap in the existing knowledge base. The paper draws attention to the limitations of existing analytical methods that neglect the serviceability limit state and assume rigid plastic soil behavior, highlighting the need for improved design approaches in this context.

This paper aims to propose a bi-level mixed integer linear location-allocation problem. The upper-level objective function is dedicated to minimizing the total distances covered by customers to meet the p-selected facilities and the fixed cost values for establishing these facilities. While in the lower level, a customer preference function evaluates the priority of customers in selecting facilities.

The solution approach to the proposed model uses the Karush–Kuhn–Tucker (KKT) optimality conditions to the lower-level problem where a set of p-selected facilities are introduced as the selection of the upper-level decision maker. The bi-level model reduces to a single-level model with some added binary variables.

Sensitivity analysis of the proposed bi-level model concerning variations of such different parameters as customers’ preferences and the number of selected facilities have been provided, using some numerical examples. Also, locating a recreational facility in Mazandaran province, Iran, has been provided to evaluate the reliability of the proposed model and efficiency of the solution approach, as well.

To the best of the authors’ knowledge, this paper is original and its findings are not available elsewhere.

In traditional methods, a one-directional distance transformation is employed to eliminate the near-singularity in the radial direction. However, when the projection point of the source point is near the boundary of the integral element, the near-singularity in the circumferential direction still exists, resulting in large errors in the numerical results. The purpose of this paper is to propose a bi-directional distance transformation for the elimination of near-singularities in two directions arising from the irregular integral element.

The sources of the circumferential near-singularity caused by irregular sub-triangular element are analyzed in this paper. A bi-directional distance transformation based on the (a, β) transformation is proposed to eliminate the near-singularities in the two directions. The (a, β) transformation is initially introduced to separate the integral variables and streamline the implementation of subsequent transformations. In the transformed (a, β) coordinate system, a new distance transformation applied in the circumferential direction is constructed.

With the proposed method, the radial and circumferential near-singularities are eliminated using two different distance transformations, respectively. Thus, accurate calculations of the nearly singular integrals can be achieved, irrespective of the shape of the integral element.

Numerical examples are presented to calculate the nearly singular integrals of different orders over both the linear integral element and the quadratic integral element. Comparative studies demonstrate that the proposed method significantly improves the accuracy of these calculations.