Search results

The purpose of this paper is to use dynamic meshing to perform CFD analyses of a NACA 0012 airfoil fitted with a morphing trailing edge (TE) flap when it undergoes static and time-dependent morphing. The steady CFD predictions of the original and morphing airfoils are validated against published data. The study also investigates an airfoil with a hinged TE flap for aerodynamic performance comparison. The study further extends to an unsteady CFD analysis of a dynamically morphing TE flap for proof-of-concept and also to realise its potential for future applications.

An existing parametrization method was modified and implemented in a user-defined function (UDF) to perform dynamic meshing which is essential for morphing airfoil unsteady simulations. The results from the deformed mesh were verified to ensure the validity of the adopted mesh deformation method. ANSYS Fluent software was used to perform steady and unsteady analysis and the results were compared with computational predictions.

Steady computational results are in good agreement with those from OpenFOAM for a non-morphing airfoil and for a morphed airfoil with a maximum TE deflection equal to 5 per cent of the chord. The results obtained by ANSYS Fluent show that an average of 6.5 per cent increase in lift-to-drag ratio is achieved, compared with a hinged flap airfoil with the same TE deflection. By using dynamic meshing, unsteady transient simulations reveal that the local flow field is influenced by the morphing motion.

An airfoil parametrisation method was modified to introduce time-dependent morphing and used to drive dynamic meshing through an in-house-developed UDF. The morphed airfoil’s superior aerodynamic performance was demonstrated in comparison with traditional hinged TE flap. A methodology was developed to perform unsteady transient analysis of a morphing airfoil at high angles of attack beyond stall and to compare with published data. Unsteady predictions have shown signs of rich flow features, paving the way for further research into the effects of a dynamic flap on the flow physics.

This paper aims to assess the aeroacoustic and aerodynamic performance of a morphing airfoil with a flexible trailing edge (FTE). The objective is to make a comparison of the aerodynamic noise characteristics between the conventional airfoil with a flap and morphing airfoil and analyse the noise reduction mechanisms of the morphing airfoil.

The computational fluid dynamic method was used to calculate the aerodynamic coefficients of morphing airfoil and the Ffowcs-Williams and Hawking’s acoustic analogy methods were performed to predict the far-field noise of different airfoils.

Results show that compared with the conventional airfoil, the morphing airfoil can generate higher lift and lower noise, but a greater drag. Additionally, the noise caused by the one-unit lift of the morphing airfoil is significantly lower than that of the conventional airfoil. For the morphing airfoil, the shedding vortex in the trailing edge was the main noise resource. As the angle of attack (AoA) increases, the overall sound pressure level of the morphing airfoil increases significantly. With the increase of the trailing edge deflection angle, the amplitude and the period of sound pressure of the morning airfoil fluctuation increase.

Presented results could be very useful during designing the morphing airfoil with FTE, which has significant advantages in aerodynamic efficiency and aeroacoustic performance.

This paper presents the aerodynamic and aeroacoustic characteristics of the morphing airfoil. The effect of trailing edge deflection angle and AoA on morphing airfoil was investigated. In the future, using a morphing airfoil instead of a traditional flap can reduce the aircraft`s fuel consumption and noise pollution.

This study aims to develop an innovative actuator for improving the performance of future aircraft, by adapting the airfoil shape according to the flight conditions. The flap’s camber of a civil regional transportation aircraft’s trailing edge actuated and morphed with the use of shape memory alloys (SMA) actuator technology, instead of the conventional split flap mechanism is studied.

For the flap’s members sizing an efficient methodology is utilised based on finite element (FE) stress analysis combined to analytically formulated design criteria. A mechanical simulation within an FE approach simulated the performance of the moving rib, integrating both aerodynamic loads and SMA phenomenology, implementing Lagouda’s constitutive model. Aim of this numerical simulation is to provide guidelines for further development of the flap. A three-dimensional assembly of the flap is constructed to produce manufacturing drawing and to ensure that during its morphing no interference between the members occurrs. Eventually, the manufactured flap is integrated on a test rig and the experimental characterisations under no and static loads, and dynamic excitation are performed.

Experimental results showed that the rib’s SMA mechanism can adequate function under load providing satisfactory morphing capabilities.

The investigated approach is an internal into the flap mechanism based on the shape memory effect of thin wires. In the developed mechanism, SMA wires are attached to the wing structure, where they function as actuating elements.

The purpose of this paper is to present a method for analysis and optimization of morphing wing. Moreover, a numerical advantage of morphing airfoil wing, typically assessed in simplified two-dimensional analysis is found using higher fidelity methods.

Because of multi-point nature of morphing wing optimization, an approach for optimization by analysis is presented. Starting from naïve parametrization, multi-fidelity aerodynamic data are used to construct response surface model. From the model, many significant information are extracted related to parameters effect on objective; hence, design sensitivity and, ultimately, optimal solution can be found.

The method was tested on benchmark problem, with some easy-to-predict results. All of them were confirmed, along with additional information on morphing trailing edge wings. It was found that wing with morphing trailing edge has around 10 per cent lower drag for the same lift requirement when compared to conventional design.

It is demonstrated that providing a smooth surface on wing gives substantial improvement in multi-purpose aircrafts. Details on how this is achieved are described. The metodology and results presented in current paper can be used in further development of morphing wing.

Most of literature describing morphing airfoil design, optimization or calculations, performs only 2D analysis. Furthermore, the comparison is often based on low-fidelity aerodynamic models. This paper uses 3D, multi-fidelity aerodynamic models. The results confirm that this approach reveals information unavailable with simplified models.

The purpose of this paper is to investigate the unsteady aerodynamic characteristics in the deflection process of a morphing wing with flexible trailing edge, which is based on time-accurate solutions. The dynamic effect of deflection process on the aerodynamics of morphing wing was studied.

The computational fluid dynamic method and dynamic mesh combined with user-defined functions were used to simulate the continuous morphing of the flexible trailing edge. The steady aerodynamic characteristics of the morphing deflection and the conventional deflection were studied first. Then, the unsteady aerodynamic characteristics of the morphing wing were investigated as the trailing edge deflects at different rates.

The numerical results show that the transient lift coefficient in the deflection process is higher than that of the static case one in large angle of attack. The larger the deflection frequency is, the higher the transient lift coefficient will become. However, the situations are contrary in a small angle of attack. The periodic morphing of the trailing edge with small amplitude and high frequency can increase the lift coefficient after the stall angle.

The investigation can afford accurate aerodynamic information for the design of aircraft with the morphing wing technology, which has significant advantages in aerodynamic efficiency and control performance.

The dynamic effects of the deflection process of the morphing trailing edge on aerodynamics were studied. Furthermore, time-accurate solutions can fully explore the unsteady aerodynamics and pressure distribution of the morphing wing.

The purpose of this study is to propose an improved design of PneuNets bending actuator which aims at obtaining larger deflection with the same magnitude of pressure. The PneuNets bending actuator shows potential application in the morphing trailing edge concept.

Finite element method is used to investigate the characteristics of the improved design bending actuator. Multiobjective optimal design of the PneuNets bending actuator is proposed based on the Gauss process regression models.

The maximum deflection is obtained when the height of the beams is smaller than half the height of the chambers. The spacing between chambers (beam length) has little effect on the deflection. Larger spacing could be used to reduce the actuator weight.

With the same pressure magnitude, the deflection of the improved design bending actuator is much larger than that of the baseline configuration. PneuNets bending actuator could increase the continuity of the aerodynamic surface compared to other actuators.

This paper aims to study the extended trailing edge airfoil for a range of angle of attack at different intensities of turbulence.

In this paper, an experimental study on NACA 0020 airfoil with thin extended trailing edge modification of amplitude of h = 0.1c, 0.2c and 0.3c at the Reynolds number of 2.14 × 10⁵ are tested. The research was carried out for an angle of attack ranging from 0° = α = 35° for the turbulence intensity of 0.3%, 3%, 5%, 7% and 12%. From the experimental readings, the surface pressures are scanned using a Scanivalve (MPS2464) pressure scanner for a sampling frequency of 700 Hz. The scanned pressures are converted to aerodynamic force coefficient and the results are combined and discussed.

The airfoil with the extended trailing edge will convert the adverse pressure gradient to a plateau pressure zone, indicating the delayed flow separation. The CL value at higher turbulence intensity (TI = 12%) for the extended trailing edge over perform the base airfoil at the post-stall region. The maintenance of flow stability is observed from the spectral graph.

A thin elongated trailing edge attached to the conventional airfoil serves as a flow control device by delaying the stall and improving the lift characteristics. Additionally, extending the airfoil's trailing edge helps to manage the performance of the airfoil even at a high level of turbulence.

Distinct from existing studies, the presented results reveals how the extended trailing edge attached to the airfoil performs in the turbulence zone ranging from 0.3% to 12% of TI. The displayed pressure distribution explains the need for increasing trailing edge amplitude (h) and its impact on flow behaviour. The observation is that extended trailing edge airfoil bears to maintain the performance even at higher turbulence region.

This study aims to investigate the effects of electroactive morphing on the Airbus A320 Reduced Scale prototype of the H2020 N° 723402 European Research project smart morphing and sensing (SMS) for aeronautical configurations [1]^,[2].

The flow regimes correspond to low subsonic take-off conditions. The morphing is applied through the vibration and slight deformation of the near trailing edge region; respecting the way, this actuation has been applied on the experimental prototype using micro fibre composite actuators. Optimal frequency range has been used, associated with low amplitudes of deformation with the Arbitrary Lagrangian Eulerian methodology. This study used an adapted turbulence modelling with the organised eddy simulation (OES) as well as a hybrid approach delayed detached eddy simulation – with embedded OES (DDES–OES), able to sensitise and keep up the coherent structures development.

The morphing at an optimal frequency (300 Hz) and amplitude (0.7 mm), applied on a length (3.5 cm) near the trailing edge, has been studied at Reynolds number 1 million and incidence of 10°. The effects on the main flow instabilities and on the turbulent vortex structures are analysed using proper orthogonal decomposition. A modification of the wake structures and a formation of organised rows of vortices along the shear layer are obtained. This leads to a quasi-two-dimensional wake, benefits on the aerodynamic performance and a decrease of the frequency peaks in the spectrum, corresponding to an attenuation of the coherent structures.

This study provides a fundamental understanding of how the actuation modifies the coherent and turbulent vortex structures around the wing and in the wake.

The purpose of this study illustrates the morphing effects around a large-scale high-lift configuration of the Airbus A320 with two elements airfoil-flap in the take-off position. The flow around the airfoil-flap and the near wake are analysed in the static case and under time-dependent vibration of the flap trailing-edge known as the dynamic morphing.

Experimental results obtained in the subsonic wind tunnel S1 of Institut de Mécanique des Fluides de Toulouse of a single wing are discussed with high-fidelity numerical results obtained by using the Navier–Stokes multi-block (NSMB) code with advanced turbulent modelling able to capture the predominant instabilities and coherent structure dynamics. An explanation of the dynamic time-dependent grid deformation is provided, which is used in the NSMB code to simulate the flap’s trailing-edge deformation in the morphing configuration. Finally, power spectral density is performed to reveal the coherent wake structures and their modification because of the morphing.

Frequency of vibration and amplitude of deformation effects are investigated for different morphing cases. Optimal morphing regions at a specific frequency and a slight deformation were able to attenuate the predominant natural shear-layer frequency and to considerably decrease the width of the von Kármán vortices with a simultaneous increase of aerodynamic performances.

The new concept of future morphed wings is proposed for a large scale A320 prototype at the take-off position. The dynamic morphing of the flap’s trailing-edge is simulated for the first time for high-lift two-element configuration. In addition, the wake analysis performed helped to show the turbulent structures according to the organised eddy simulation model.

This paper aims to study the effect of corrugated skins on the aerodynamic performance of the cambered NACA 0012 airfoils at different corrugations parameters, maximum cambers, Reynolds numbers and maximum camber locations.

In this work, numerical approach is concerned, and results are obtained based on the finite volume approach. To characterize the effect of corrugated skins, the NACA 0012-corrugated airfoil section is chosen as the base airfoil, and different cambered corrugated airfoil sections are obtained by inclusion the camber to the base airfoil. In this research, the corrugation shape is a sinusoidal wave and corrugated skins are in the aft 30 per cent of airfoil chord. To investigate the effect of corrugations on the cambered sections, the drag coefficient and averaged lift curve slope for the corrugated airfoils are compared to those of the corresponding smooth sections.

Results indicate that the effect of increase in the maximum camber and also Reynolds number on the relative zero-incidence drag coefficient is of little importance at low corrugation amplitudes, whereas at high corrugation, amplitude results in different behaviors. It is found that as the maximum camber increases, the deterioration in the relative curve slope introduced by corrugated skins is reduced, and reduction in this deterioration is significant for high corrugation amplitudes airfoils. It is shown that an increase in the maximum camber location has nearly no effect on the relative zero-incidence drag coefficient and also relative lift curve slope.

The outcome of the present research provides the clues for better understanding of the effect of different corrugations parameters on the aerodynamic performance of the unmanned air vehicles to have as high aerodynamic performance as possible in different mission profiles of such vehicles.