Search results

This paper aims to analyze the synergistic influence of performance appraisal (PA) practices and performance-driven culture (PDC) on the effectiveness of the performance management (PM) system, which is measured by employees' reactions, namely satisfaction and perceived utility. It also analyzes the type of relationship between PA practices and PA satisfaction, specifically whether it is additive or modeled as a latent factor.

This is a cross-sectional study. Data were collected from 513 managers and employees working in 135 public and private organizations. The research model and hypotheses were tested using structured equation modeling.

The results support the positive impact of a set of four PA best practices on PA satisfaction. It shows that PDC is an enabler for the effective deployment of PA practices. It also demonstrates that the perceived utility of the PM system plays a role as a mediator in the relationship between PA practices and PA satisfaction.

Data were collected using a questionnaire at a single point in time, and thus, cause-and-effect inferences were not possible.

The results provide guidance to organizations that are interested in designing and implementing PM systems and PA practices that contribute toward enhancing employees' managing performance experiences.

This study advances our understanding of the mechanisms by which organizational culture and PA practices influence the effectiveness of the PM system. It suggests that organizations, to benefit the most from a set of PA best practices, need to have a PDC.

A semiparametric stochastic frontier model is proposed for panel data, incorporating several flexible features. First, a constant elasticity of substitution (CES) production frontier is considered without log-transformation to prevent induced non-negligible estimation bias. Second, the model flexibility is improved via semiparameterization, where the technology is an unknown function of a set of environment variables. The technology function accounts for latent heterogeneity across individual units, which can be freely correlated with inputs, environment variables, and/or inefficiency determinants. Furthermore, the technology function incorporates a single-index structure to circumvent the curse of dimensionality. Third, distributional assumptions are eschewed on both stochastic noise and inefficiency for model identification. Instead, only the conditional mean of the inefficiency is assumed, which depends on related determinants with a wide range of choice, via a positive parametric function. As a result, technical efficiency is constructed without relying on an assumed distribution on composite error. The model provides flexible structures on both the production frontier and inefficiency, thereby alleviating the risk of model misspecification in production and efficiency analysis. The estimator involves a series based nonlinear least squares estimation for the unknown parameters and a kernel based local estimation for the technology function. Promising finite-sample performance is demonstrated through simulations, and the model is applied to investigate productive efficiency among OECD countries from 1970–2019.

Understanding and tailoring the solidification characteristics and microstructure evolution in as-built parts fabricated by laser powder bed fusion (LPBF) is crucial as they influence the final properties. Experimental approaches to address this issue are time and capital-intensive. This study aims to develop an efficient numerical modeling approach to develop the process–structure (P-S) linkage for LPBF-processed Inconel 718.

In this study, a numerical approach based on the finite element method and cellular automata was used to model the multilayer, multitrack LPBF build for predicting the solidification characteristics (thermal gradient G and solidification rate R) and the average grain size. Validations from published experimental studies were also carried out to ensure the reliability of the proposed numerical approach. Furthermore, microstructure simulations were used to develop P-S linkage by evaluating the effects of key LPBF process parameters on G × R, G/R and average grain size. A solidification or G-R map was also developed to comprehend the P-S linkage.

It was concluded from the developed G-R map that low laser power and high scan speed will result in a finer microstructure due to an increase in G × R, but due to a decrease in G/R, columnar characteristics are also reduced. Moreover, increasing the layer thickness and decreasing the hatch spacing lowers the G × R, raises the G/R and generates a coarse columnar microstructure.

The proposed numerical modeling approach was used to parametrically investigate the effect of LPBF parameters on the resulting microstructure. A G-R map was also developed that enables the tailoring of the as-built LPBF microstructure through solidification characteristics by tuning the process parameters.

This paper aims to assess the legal and regulatory framework for mobile banking (M-banking) in Tanzania. The technological development in information and communication technologies has converted a mobile phone from a simple communication device to a very complex instrument that allows people to perform various digital transactions and extra operations such as web browsing and email reading. Such tremendous developments have brought in place the regime of M-banking. The birth of M-banking has brought legal and institutional challenges that were not anticipated before. It has complicated the traditional role of the telecommunication regulator and financial regulator in the business and caused legal gaps that need to be bridged.

To disclose the legal gaps and bridge them, the study used doctrinal legal method and comparative study to learn the experience of international legal instruments and policies and laws of other jurisdictions. This paper has evaluated the contribution of international legal instruments and legal frameworks of foreign jurisdictions such as Kenya and the Philippines.

It has been revealed that the prevailing laws regulating M-banking in Tanzania do not adequately address and bridge the existing legal gaps. There is a need to enact a specific law regulating M-banking and confer such powers to a specific institution to deal with regulatory issues.

This paper stresses the importance of enacting new laws that will offer room for financial inclusion in the digital economy and protect consumers against financial risk. It also intends to act as a catalyst and change agent in policy and legislative development in the M-banking industry. It would also bring special attention to addressing consumer rights, security and risky issues surrounding the M-banking industry. Although several other authors in Tanzania have written in this area, they have not clearly focused on disclosing the existing legal gaps resulting from the convergence of the financial and communication sectors. This paper is therefore trying to offer an extensive discussion on the legislative development in the M-banking industry in Tanzania.

The authors propose to estimate a varying coefficient panel data model with different smoothing variables and fixed effects using a two-step approach. The pilot step estimates the varying coefficients by a series method. We then use the pilot estimates to perform a one-step backfitting through local linear kernel smoothing, which is shown to be oracle efficient in the sense of being asymptotically equivalent to the estimate knowing the other components of the varying coefficients. In both steps, the authors remove the fixed effects through properly constructed weights. The authors obtain the asymptotic properties of both the pilot and efficient estimators. The Monte Carlo simulations show that the proposed estimator performs well. The authors illustrate their applicability by estimating a varying coefficient production frontier using a panel data, without assuming distributions of the efficiency and error terms.

Tribological research is complex and multidisciplinary, with many parameters to consider. As traditional experimentation is time-consuming and expensive due to the complexity of tribological systems, researchers tend to use quantitative and qualitative analysis to monitor critical parameters and material characterization to explain observed dependencies. In this regard, numerical modeling and simulation offers a cost-effective alternative to physical experimentation but must be validated with limited testing. This paper aims to highlight advances in numerical modeling as they relate to the field of tribology.

This study performed an in-depth literature review for the field of modeling and simulation as it relates to tribology. The authors initially looked at the application of foundational studies (e.g. Stribeck) to understand the gaps in the current knowledge set. The authors then evaluated a number of modern developments related to contact mechanics, surface roughness, tribofilm formation and fluid-film layers. In particular, it looked at key fields driving tribology models including nanoparticle research and prosthetics. The study then sought out to understand the future trends in this research field.

The field of tribology, numerical modeling has shown to be a powerful tool, which is both time- and cost-effective when compared to standard bench testing. The characterization of tribological systems of interest fundamentally stems from the lubrication regimes designated in the Stribeck curve. The prediction of tribofilm formation, film thickness variation, fluid properties, asperity contact and surface deformation as well as the continuously changing interactions between such parameters is an essential challenge for proper modeling.

This paper highlights the major numerical modeling achievements in various disciplines and discusses their efficacy, assumptions and limitations in tribology research.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2023-0076/

Fused deposition modeling (FDM) is an extensively used additive manufacturing method with the capacity to build complex functional components. Due to the machinery and environmental factors during manufacturing, the FDM parts inevitably demonstrated uncertainty in properties and performance. This study aims to identify the stochastic constitutive behaviors of FDM-fabricated polylactic acid (PLA) tensile specimens induced by the manufacturing process.

By conducting the tensile test, the effects of the printing machine selection and three major manufacturing parameters (i.e., printing speed S, nozzle temperature T and layer thickness t) on the stochastic constitutive behaviors were investigated. The influence of the loading rate was also explained. In addition, the data-driven models were established to quantify and optimize the uncertain mechanical behaviors of FDM-based tensile specimens under various printing parameters.

As indicated by the results, the uncertain behaviors of the stiffness and strength of the PLA tensile specimens were dominated by the printing speed and nozzle temperature, respectively. The manufacturing-induced stochastic constitutive behaviors could be accurately captured by the developed data-driven model with the R² over 0.98 on the testing dataset. The optimal parameters obtained from the data-driven framework were T = 231.3595 °C, S = 40.3179 mm/min and t = 0.2343 mm, which were in good agreement with the experiments.

The developed data-driven models can also be integrated into the design and characterization of parts fabricated by extrusion and other additive manufacturing technologies.

Stochastic behaviors of additively manufactured products were revealed by considering extensive manufacturing factors. The data-driven models were proposed to facilitate the description and optimization of the FDM products and control their quality.

This study identifies and characterizes configurations of generic business models for logistics service providers (LSPs) in the context of industrial additive manufacturing (AM). A literature-based framework of the AM service supply chain (SC) is developed to embed the generic configurations in their SC context.

Following an exploratory research design, 17 interviews were conducted with LSPs, LSPs' potential partners and customers for industrial AM services.

Six generic configurations are identified, the LSP as a Manufacturer, Landlord, Logistician, Connector, Agent and Consultant. The authors outline how these configurations differ in the required locations, partners and targeted customer segments.

The current discussion of reshoring and shorter, decentralized AM SCs confronts LSPs with novel challenges. This study offers guidance for managers of LSPs for designing business models for industrial AM and raises awareness for LSPs' resource and SC implications.

This study contributes to the scarce literature on AM business models for LSPs with in-depth empirical insights. Based on the six identified configurations, this study sets the ground for theorizing about the business models, in particular, the value creation, value proposition and mechanisms for value capture of the business models. In addition, this study suggests how the generic configurations fit the features of specific types of LSPs.

The purpose of this paper is to provide a new procedure for in-plane compensation of geometric errors that often appear in the layers deposited by an additive manufacturing (AM) process when building a part, regardless of the complexity of the layer geometry.

The procedure is based on comparing the real layer contours to the nominal ones extracted from the STL model of the part. Considering alignment and form deviations, the compensation algorithm generates new compensated contours that match the nominal ones as closely as possible. To assess the compensation effectiveness, two case studies were analysed. In the first case, the parts were not manufactured, but the distortions were simulated using a predictive model. In the second example, the test part was actually manufactured, and the distortions were measured on a coordinate measuring machine.

The geometric deviations detected in both case studies, as evaluated by various quality indicators, reduced significantly after applying the compensation procedure, meaning that the compensated and nominal contours were better matched both in shape and size.

Although large contours showed deviations close to zero, dimensional overcompensation was observed when applied to small contours. The compensation procedure could be enhanced if the applied compensation factor took into account the contour size of the analysed layer and other geometric parameters that could have an influence.

The presented method of compensation is applicable to layers of any shape obtained in any AM process.

Indian railways (IR) is one of the largest railway networks in the world. As a part of its strategic development initiative, demand forecasting can be one of the indispensable activities, as it may provide basic inputs for planning and control of various activities such as coach production, planning new trains, coach augmentation and quota redistribution. The purpose of this study is to suggest an approach to demand forecasting for IR management.

A case study is carried out, wherein several models i.e. automated autoregressive integrated moving average (auto-ARIMA), trigonometric regressors (TBATS), Holt–Winters additive model, Holt–Winters multiplicative model, simple exponential smoothing and simple moving average methods have been tested. As per requirements of IR management, the adopted research methodology is predominantly discursive, and the passenger reservation patterns over a five-year period covering a most representative train service for the past five years have been employed. The relative error matrix and the Akaike information criterion have been used to compare the performance of various models. The Diebold–Mariano test was conducted to examine the accuracy of models.

The coach production strategy has been proposed on the most suitable auto-ARIMA model. Around 6,000 railway coaches per year have been produced in the past 3 years by IR. As per the coach production plan for the year 2023–2024, a tentative 6551 coaches of various types have been planned for production. The insights gained from this paper may facilitate need-based coach manufacturing and optimum utilization of the inventory.

This study contributes to the literature on rail ticket demand forecasting and adds value to the process of rolling stock management. The proposed model can be a comprehensive decision-making tool to plan for new train services and assess the rolling stock production requirement on any railway system. The analysis may help in making demand predictions for the busy season, and the management can make important decisions about the pricing of services.