Search results

The purpose of this paper is to introduce an aid for teaching transverse flux permanent magnet machines (TFPMs) with emphasis on their torque production.

The Lorentz force law is applied to fictitious current loops emulating the permanent magnets (PMs) mounted on the rotor according to different arrangements; the air gap flux density is created by the armature current.

Implemented in a master lecture on special AC machines, the proposed approach has revealed a renewed interest in electromagnetic fundamentals for pedagogical purposes. It makes simple the explanation of the principle of operation of a class of AC machines reputed by the complexity of their magnetic circuits. The latter incorporates axially stacked decoupled sub-circuits, one per phase generating alternating magnetic fields. More specifically, there is common air gap, shared by the machine phases, in which a rotating magnetic field is created by the superposition of the PM contribution and the armature one.

Accounting for the complexity of the magnetic circuits and the three-dimensional (3D) flux paths characterizing TFPMs, a 3D finite element analysis (FEA) is required for the validation of the analytical predictions. Nevertheless, such a 3D FEA validation is far from being obvious to be carried on within a master lecture.

While the basis of Lorentz forces resulting from fictitious current loops emulating PMs has been considered in some referenced papers, its simple and pedagogical application to assess the torque production of several TFPM concepts represents the added value of the present paper.

This study aims to obtain the minimum torque ripple at the maximum average torque for Flux-switching permanent magnet (FSPM) machines.

This paper is about torque performance optimization of the FSPM machines. To achieve that, finite element analysis and genetic algorithm (GA) are used. Five different designs are simulated, optimized and compared on their air gap flux density, back electromotive force, cogging torque, average torque, torque density and torque ripple.

After the thousands of iterations, its proved that all proposed shaping techniques have potential for reducing torque ripple and cogging torque, with slightly reduced average torque. The best design is the joint stator and rotor shaping, Design V, which results in the lowest torque ripple and cogging torque. The techniques should be applicable to FSPMs with other stator slot/rotor pole number combinations.

In this paper, rotor pole shaping by notching, chamfering and generic shaping, stator tooth shaping and joint shaping techniques are investigated for 12 s/10p FSPM machines. Rotor and stator flanks are optimized separately and jointly, by using finite element analysis and GA for optimization to achieve maximum average torque and minimum torque ripple. Five different design is implemented and compared, respectively.

This study aims to fabricate multiwalled carbon nanotubes (MWCNTs)-mediated polyvinyl alcohol (PVA) composite films using the solution casting approach.

The prepared films were evaluated for diverse structural, surface, optical and electrical attributes using advanced analytical techniques, i.e. electron microscopy for surface morphology, Fourier transform infrared spectroscopy for tracing chemical functionalities, x-ray diffraction (XRD) for crystal patterns, water contact angle (WCA) analysis for surface wettability and UV visible spectroscopy for optical absorption parameters. The specimens were also investigated for certain rheological, mechanical and electrical properties, where applicable.

The surface morphology results expressed a better dispersion of MWCNTs in the resultant PVA-based nanocomposite film. The XRD analysis exhibited that the nanocomposite film was crystalline. The surface wettability analysis indicated that with the inclusion of MWCNTs, the WCA of the resultant nanocomposite film improved to 89.4° from 44° with the pristine PVA film. The MWCNTs (1.00%, w/w) incorporated PVA-based film exhibited a tensile strength of 54.0 MPa as compared to that of native PVA as 25.3 MPa film. There observed a decreased bandgap (from 5.25 to 5.14 eV) on incorporating the MWCNTs in the PVA-based nanocomposite film.

The MWCNTs’ inclusion in the PVA matrix could enhance the AC conductivity of the resultant nanocomposite film. The prepared nanocomposite film might be useful in designing certain optoelectronic devices.

The results demonstrated the successful MWCNTs mediation in the PVA-based composite films expressed good intercalation of the precursors; this resulted in decreased bandgap, usually, desirable for optoelectronic applications.

This paper seeks to establish design quality indicators (DQIs) that can be utilized for assessing the design of community centers, with an emphasis on the technical, functional, and behavioral performance domains.

A comprehensive literature review resulted in identifying 79 DQIs for community centers. A three round Delphi evaluation approach was utilized to rate the importance of the DQIs through their relative importance index (RII) values. The assessment of the DQIs involved a diverse group of stakeholders including facilities managers, architects/engineers (A/Es), community centers’ staff, and regular visitors of community centers.

The majority of the established DQIs were considered to be either “Very Important” or “Important”.

The established DQIs can be utilized to identify best practices in the design of community centers and benchmark the performance of different community centers.

The design quality of community centers could significantly impact the community's quality of life and user experience. The development of DQIs provides for enhanced accountability and improved service delivery for the communities they serve. This enables community centers to be more effective, efficient, and responsive to the needs of the users they support.

The purpose of this study is to review the different facets associated with Industry 5.0 (I5.0) and propose a conceptual framework to boost the applicability of this novel technological cum social aspects within industrial organizations for improved organizational sustainability.

This research work adopted a bibliometric analysis that encapsulates a quantitative set of tools for bibliometric and bibliographic information. This study uses the database of Scopus to acquire data related to different facets of I5.0. The study implies a different spectrum of terms to reach the final corpus of 91 articles related to I5.0. Furthermore, a conceptual define, measure, analyze, improve and control (DMAIC)-based framework based on different literature findings is proposed and validated based on the input of experts from different parts of the world.

The results indicate that I5.0 is still in its infancy. The wider applicability of I5.0 demands comprehensive theoretical knowledge of different facets of this new paradigm and the development of a framework to adopt it on a larger scale. Organizations that are in the race to adopt I5.0 face major challenges related to the digitization of processes along with well-defined cyber-physical systems and the lack of a dedicated framework to execute I5.0. Furthermore, the result also suggests that manufacturing industries are more ready to adopt I5.0 practices as compared to service industries, which can be attributed to well-defined technological measures available in manufacturing settings.

To the best of the authors’ knowledge, this is one of the first studies that explore different know-how and challenges and provides a holistic view of I5.0 by providing a systematic adoption framework.

The aim of this paper is to review the literature on the prediction of cutting tool life. Tool life is typically estimated by predicting the time to reach the threshold flank wear width. The cutting tool is a crucial component in any machining process, and its failure affects the manufacturing process adversely. The prediction of cutting tool life by considering several factors that affect tool life is crucial to managing quality, cost, availability and waste in machining processes.

This study has undertaken the critical analysis and summarisation of various techniques used in the literature for predicting the life or remaining useful life (RUL) of the cutting tool through monitoring the tool wear, primarily flank wear. The experimental setups that comprise diversified machining processes, including turning, milling, drilling, boring and slotting, are covered in this review.

Cutting tool life is a stochastic variable. Tool failure depends on various factors, including the type and material of the cutting tool, work material, cutting conditions and machine tool. Thus, the life of the cutting tool for a particular experimental setup must be modelled by considering the cutting parameters.

This submission discusses tool life prediction comprehensively, from monitoring tool wear, primarily flank wear, to modelling tool life, and this type of comprehensive review on cutting tool life prediction has not been reported in the literature till now. The future suggestions provided in this review are expected to provide avenues to solve the unexplored challenges in this field.

The purpose of this paper is to investigate the surface integrity features, including surface roughness (SR), recast layer (RL), material migration, topography and wire wear pattern in rough and trim-cut wire electric discharge machine (WEDM) of hybrid composite (Al6061-90%/SiC-2.5%/TiB₂-7.5%).

Effects of four important factors, namely, rough-cut history (RCH), pulse on time (T_on), peak current (IP) and wire offset (WO) have been assessed on the responses of interest for trim-cut WEDM. Box–Behnken design (RSM) was used to formulate the experimentation plan. Quantitative indices of surface integrity, namely, SR and RL, and selected samples have been investigated for qualitative analysis, namely, surface topography, material migration and wire wear pattern.

T_on and IP are found to be most significant, whereas RCH and WO are found insignificant for SR. T_on and WO were found to be the most significant factors affecting RL. After trim cut, an RL of thickness 8.26 µm is observed if the initial rough cut has been accomplished at high discharge energy setting. Whereas the best value of RL thickness, i.e. 5.36 µm, can be realized with low level of RCH. A significant decrease in the presence of foreign materials is recorded, indicating its strong correlation with the discharge energy used during machining.

Investigation on surface integrity features for machining of hybrid composite through rough and trim-cut WEDM has been reported by only a limited number of researchers in the past. This study is attempted at fulfilling few vital gaps by addressing the issues such as evaluation of the efficacy of trim cutting under different discharge energy conditions (using RCH), analysis of wire wear pattern in both rough and trim-cut modes and investigation of the wire breakage phenomenon during machining.

This research examined the influence of the service attribute components of a smart automated coffee vending machine on the enjoyment and choice behaviour of customers from the perspective of the Stimulus-Organism-Response paradigm.

To gain an improved understanding of the influential factors that can yield the desired study outcomes, this research employed sufficiency logic and necessity logic to provide insights and practical implications for research.

While this study identified “special benefits” as a sufficient factor to induce both enjoyment and choice behaviour, “interactive experience” and “ease of use” were found to be the fundamental factors for achieving these two desirable outcomes.

This research extends beyond the conventional approach of symmetric analysis by incorporating necessary condition analysis to explore the essential conditions necessary for enjoyment and choice behaviours during automated-vending-machine consumption. The smart feature, highlighted by the ‘interactive experience,’ is revealed as one of the necessary factors in fostering enjoyment and influencing consumer choice of beverages from smart automated vending machines.

Although the previous generations of the Industrial Revolution have brought many advantages to human life, scientists have been looking for a substantial breakthrough in creating technologies that can improve the quality of human life. Nowadays, we can make our factories smarter using new concepts and tools like real-time self-optimization. This study aims to take a step towards implementing key features of smart manufacturing including  preventive self-maintenance, self-scheduling and real-time decision-making.

A new bi-objective mathematical model based on Industry 4.0 to schedule received customer orders, which minimizes both the total earliness and tardiness of orders and the probability of machine failure in smart manufacturing, was presented. Moreover, four meta-heuristics, namely, the multi-objective Archimedes optimization algorithm (MOAOA), NSGA-III, multi-objective simulated annealing (MOSA) and hybrid multi-objective Archimedes optimization algorithm and non-dominated sorting genetic algorithm-III (HMOAOANSGA-III) were implemented to solve the problem. To compare the performance of meta-heuristics, some examples and metrics were presumed and solved by using the algorithms, and the performance and validation of meta-heuristics were analyzed.

The results of the procedure and a mathematical model based on Industry 4.0 policies showed that a machine performed the self-optimizing process of production scheduling and followed a preventive self-maintenance policy in real-time situations. The results of TOPSIS showed that the performances of the HMOAOANSGA-III were better in most problems. Moreover, the performance of the MOSA outweighed the performance of the MOAOA, NSGA-III and HMOAOANSGA-III if we only considered the computational times of algorithms. However, the convergence of solutions associated with the MOAOA and HMOAOANSGA-III was better than those of the NSGA-III and MOSA.

In this study, a scheduling model considering a kind of Industry 4.0 policy was defined, and a novel approach was presented, thereby performing the preventive self-maintenance and self-scheduling by every single machine. This new approach was introduced to integrate the order scheduling system using a real-time decision-making method. A new multi-objective meta-heuristic algorithm, namely, HMOAOANSGA-III, was proposed. Moreover, the crowding-distance-quality-based approach was presented to identify the best solution from the frontier, and in addition to improving the crowding-distance approach, the quality of the solutions was also considered.

The aim of this paper is to study the effect of laser shock peening (LSP) on mechanical behaviour of the laser-directed energy deposition (LDED)-based printed 15-5 PH stainless steel with U and V notches. The study specifically concentrates on the evaluation of effect of scan strategy, machining and LSP processing on microstructural, texture evolution and fatigue behaviour of LDED-printed 15-5 PH steel.

For LSP treatment, 15-5 PH steel was printed using LDED process with bidirectional scanning strategy (XX [θ = 0°) and XY [θ = 90°]) at optimised laser power of 600 W with a scanning speed of 300 mm/min and a powder feed rate of 3 g/min. Furthermore, LSP treatment was conducted on the V- and U-notched fatigue specimens extracted from LDED-built samples at laser energy of 3.5 J with a pulse width of 10 ns using laser spot diameter of 3 mm. Post to the LSP treatment, the surface roughness, fatigue life assessment and microstructural evolution analysis is performed. For this, different advanced characterisation techniques are used, such as scanning electron microscopy attached with electron backscatter diffraction for microstructure and texture, X-ray diffraction for residual stress (RS) and structure information, Vicker’s hardness tester for microhardness and universal testing machine for low-cycle fatigue.

It is observed that both scanning strategies during the LDED printing of 15-5 PH steel and laser peening have played significant role in fatigue life. Specimens with the XY printing strategy shows higher fatigue life as compared to XX with both U- and V-notched conditions. Furthermore, machining and LSP treatment led to a significant improvement of fatigue life for both scanning strategies with U and V notches. The extent of increase in fatigue life for both XX and XY scanning strategy with V notch is found to be higher than U notch after LSP treatment, though without LSP samples with U notch have a higher fatigue life. As fabricated sample is found to have the lowest fatigue life as compared to machines and laser peened with both scan strategies.

This study presents an innovative method to improve the fatigue life of 15-5 PH stainless steel by changing the microstructure, texture and RS with the adoption of a suitable scanning strategy, machining and LSP treatment as post-processing. The combination of preferred microstructure and compressive RS in LDED-printed 15-5 PH stainless steel achieved with a synergy between microstructure and RS, which is responsible to improve the fatigue life. This can be adopted for the futuristic application of LDED-printed 15-5 PH stainless steel for different applications in aerospace and other industries.