Search results

In this study, the authors propose a novel digital twinning approach specifically designed for controlling transient thermal systems. The purpose of this study is to harness the combined power of deep learning (DL) and physics-based methods (PBM) to create an active virtual replica of the physical system.

To achieve this goal, we introduce a deep neural network (DNN) as the digital twin and a Finite Element (FE) model as the physical system. This integrated approach is used to address the challenges of controlling an unsteady heat transfer problem with an integrated feedback loop.

The results of our study demonstrate the effectiveness of the proposed digital twinning approach in regulating the maximum temperature within the system under varying and unsteady heat flux conditions. The DNN, trained on stationary data, plays a crucial role in determining the heat transfer coefficients necessary to maintain temperatures below a defined threshold value, such as the material’s melting point. The system is successfully controlled in 1D, 2D and 3D case studies. However, careful evaluations should be conducted if such a training approach, based on steady-state data, is applied to completely different transient heat transfer problems.

The present work represents one of the first examples of a comprehensive digital twinning approach to transient thermal systems, driven by data. One of the noteworthy features of this approach is its robustness. Adopting a training based on dimensionless data, the approach can seamlessly accommodate changes in thermal capacity and thermal conductivity without the need for retraining.

The main purpose of this paper is to examine the adoption of big data analytics (BDA) in the Tanzania banking industry by investigating the influence of technological, environmental and organizational (TOE) factors while exploring the moderating role of perceived risk (PR).

The study employed a qualitative research design, and the research instrument was developed using per-defined measurement items adopted from prior studies; the items were slightly adjusted to fit the current context. The questionnaires were distributed to top and middle managers in selected banks in Tanzania using the snowball sampling technique. Out of 360 received responses, 302 were considered complete and valid for data analysis. The study employed partial least squares structural equation modeling (PLS-SEM) to examine the developed conceptual framework.

Top management support and financial resources emerged as influential organizational factors, as did competition intensity for the environmental factors. Notably, bank size and perceived trends showed no significant impacts on BDA adoption. The study's novelty lies in revealing PR as a moderating factor, weakening the link between technological readiness, perceived usefulness and the intent to adopt BDA.

This study extends literature by extending the TOE model, through examining the moderating roles of PR on technological factors. Furthermore, the study provides useful managerial support for the adoption of BDA in banking in emerging economies.

This study aims to comparatively measure the impact factors of financial inclusion and their spillover effects for Belt and Road countries using panel data from 57 countries in 2011, 2014, 2017 and 2021 and relevant indicators from three dimensions: availability, usage and quality to construct a digital empowerment index of financial inclusion.

A spatial Durbin panel model is constructed to empirically test the impact mechanism of financial inclusion under digital empowerment.

Results reveal that improving a country’s quality of regulation, technology and residents’ financial literacy significantly contributes to the development of its financial inclusion, while improving its neighboring countries’ financial literacy also boosts its financial inclusion development. This study provides theoretical support for evaluating the development level of inclusive finance in “Belt and Road” countries, promoting the development of inclusive finance and alleviating the problem of financial exclusion.

This study is original as it creates a research paradigm for “Belt and Road” countries, enabling systematic testing and comparative analysis of inclusive finance development. It incorporates traditional and digital services, evaluating them based on sharing, fairness, convenience and specific group benefits. An inclusive financial index is constructed using the coefficient of variation and arithmetic weighted average methods. Additionally, it introduces a more rational analysis approach for the influence mechanism and spatial effect, using an economic geography nested matrix and spatial Durbin model to explore spatial effects in inclusive finance.

The purpose of this article is based on the unit patent license fee model in the closed-loop supply chain.

This paper analyzes the impact of the bundling strategy of the retailer selling new products and remanufactured products on the closed-loop supply chain under the condition that the original manufacturer produces new products and the remanufacturer produces remanufacturing products.

The results show that alternative products can be bundled, and in many cases, the bundling of remanufactured products and new products is better than selling alone.

If the retailer chooses bundling, for the remanufacturer, when certain conditions are met, the benefits of bundling are greater than the separate sales at that time; for the original manufacturer, when the recycling price sensitivity coefficient is high, the bundling is better than separate sales.

This study aims to ensure reliable analysis of dynamic responses in asphalt pavement structures. It investigates noise reduction and data mining techniques for pavement dynamic response signals.

The paper conducts time-frequency analysis on signals of pavement dynamic response initially. It also uses two common noise reduction methods, namely, low-pass filtering and wavelet decomposition reconstruction, to evaluate their effectiveness in reducing noise in these signals. Furthermore, as these signals are generated in response to vehicle loading, they contain a substantial amount of data and are prone to environmental interference, potentially resulting in outliers. Hence, it becomes crucial to extract dynamic strain response features (e.g. peaks and peak intervals) in real-time and efficiently.

The study introduces an improved density-based spatial clustering of applications with Noise (DBSCAN) algorithm for identifying outliers in denoised data. The results demonstrate that low-pass filtering is highly effective in reducing noise in pavement dynamic response signals within specified frequency ranges. The improved DBSCAN algorithm effectively identifies outliers in these signals through testing. Furthermore, the peak detection process, using the enhanced findpeaks function, consistently achieves excellent performance in identifying peak values, even when complex multi-axle heavy-duty truck strain signals are present.

The authors identified a suitable frequency domain range for low-pass filtering in asphalt road dynamic response signals, revealing minimal amplitude loss and effective strain information reflection between road layers. Furthermore, the authors introduced the DBSCAN-based anomaly data detection method and enhancements to the Matlab findpeaks function, enabling the detection of anomalies in road sensor data and automated peak identification.

This paper provides practical advice for archaeologists and heritage specialists wishing to use ML approaches to identify archaeological features in high-resolution satellite imagery (or other remotely sensed data sources). We seek to balance the disproportionately optimistic literature related to the application of ML to archaeological prospection through a discussion of limitations, challenges and other difficulties. We further seek to raise awareness among researchers of the time, effort, expertise and resources necessary to implement ML successfully, so that they can make an informed choice between ML and manual inspection approaches.

Automated object detection has been the holy grail of archaeological remote sensing for the last two decades. Machine learning (ML) models have proven able to detect uniform features across a consistent background, but more variegated imagery remains a challenge. We set out to detect burial mounds in satellite imagery from a diverse landscape in Central Bulgaria using a pre-trained Convolutional Neural Network (CNN) plus additional but low-touch training to improve performance. Training was accomplished using MOUND/NOT MOUND cutouts, and the model assessed arbitrary tiles of the same size from the image. Results were assessed using field data.

Validation of results against field data showed that self-reported success rates were misleadingly high, and that the model was misidentifying most features. Setting an identification threshold at 60% probability, and noting that we used an approach where the CNN assessed tiles of a fixed size, tile-based false negative rates were 95–96%, false positive rates were 87–95% of tagged tiles, while true positives were only 5–13%. Counterintuitively, the model provided with training data selected for highly visible mounds (rather than all mounds) performed worse. Development of the model, meanwhile, required approximately 135 person-hours of work.

Our attempt to deploy a pre-trained CNN demonstrates the limitations of this approach when it is used to detect varied features of different sizes within a heterogeneous landscape that contains confounding natural and modern features, such as roads, forests and field boundaries. The model has detected incidental features rather than the mounds themselves, making external validation with field data an essential part of CNN workflows. Correcting the model would require refining the training data as well as adopting different approaches to model choice and execution, raising the computational requirements beyond the level of most cultural heritage practitioners.

Improving the pre-trained model’s performance would require considerable time and resources, on top of the time already invested. The degree of manual intervention required – particularly around the subsetting and annotation of training data – is so significant that it raises the question of whether it would be more efficient to identify all of the mounds manually, either through brute-force inspection by experts or by crowdsourcing the analysis to trained – or even untrained – volunteers. Researchers and heritage specialists seeking efficient methods for extracting features from remotely sensed data should weigh the costs and benefits of ML versus manual approaches carefully.

Our literature review indicates that use of artificial intelligence (AI) and ML approaches to archaeological prospection have grown exponentially in the past decade, approaching adoption levels associated with “crossing the chasm” from innovators and early adopters to the majority of researchers. The literature itself, however, is overwhelmingly positive, reflecting some combination of publication bias and a rhetoric of unconditional success. This paper presents the failure of a good-faith attempt to utilise these approaches as a counterbalance and cautionary tale to potential adopters of the technology. Early-majority adopters may find ML difficult to implement effectively in real-life scenarios.

Unlike many high-profile reports from well-funded projects, our paper represents a serious but modestly resourced attempt to apply an ML approach to archaeological remote sensing, using techniques like transfer learning that are promoted as solutions to time and cost problems associated with, e.g. annotating and manipulating training data. While the majority of articles uncritically promote ML, or only discuss how challenges were overcome, our paper investigates how – despite reasonable self-reported scores – the model failed to locate the target features when compared to field data. We also present time, expertise and resourcing requirements, a rarity in ML-for-archaeology publications.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

This study aims to analyze and compare the relationship between international trade in global value chains (GVC) and greenhouse gas (GHG) emissions for Brazil and China from 2000 to 2016.

The input-output method apply to multiregional tables from Eora-26 to decompose the GHG emissions of the Brazilian and Chinese productive structure.

The data reveals that Chinese production and consumption emissions are associated with power generation and energy-intensive industries, a significant concern among national and international policymakers. For Brazil, the largest territorial emissions captured by the metrics come from services and traditional industry, which reveals room for improving energy efficiency. The analysis sought to emphasize how the productive structure and dynamics of international trade have repercussions on the environmental dimension, to promote arguments that guide the execution of a more sustainable, productive and commercial development strategy and offer inputs to advance discussions on the attribution of climate responsibility.

The metrics did not capture emissions related to land use and deforestation, which are representative of Brazilian emissions.

Comparative analysis of emissions embodied in traditional sectoral trade flows and GVC, on backward and forward sides, for developing countries with the main economic regions of the world.

Digitalization is one of the major factors that fosters economic growth across the world. However, the level of digitalization varies significantly between developed and developing countries, with the latter often lagging behind. To bridge this gap, it is crucial to pinpoint the drivers of digitalization, specifically from the macroeconomic and country-level governance dimensions. Therefore, this study aims to investigate the determinants of digitalization, particularly for countries in Asia and the Pacific region.

Our study utilizes unbalanced panel data from 46 Asian and Pacific countries for the period of 2001–2021. Initially, we analyzed the data using conventional econometric methods, such as pooled ordinary least squares (POLS), random-effects model (REM) and fixed-effects model (FEM). Moreover, we employed endogeneity-corrected techniques and alternative proxies to enhance the robustness and reliability of our findings.

Our findings reveal that economic development progress, government expenditure relative to country size and political stability are key drivers of digitalization. In contrast, corruption at the country level emerges as a significant impediment. Notably, our results remain robust to endogeneity-corrected techniques and alternative proxies of digitalization. Overall, these insights can inform policymakers, helping them to understand the macroeconomic and governance factors shaping digitalization and guide their decision-making toward effective policy interventions.

This study’s empirical findings add significant value to the existing literature by quantifying the impact of macroeconomic and governance factors on digitalization in selected countries. This offers valuable insights for policymakers, particularly in nations with lower levels of digitalization.

Despite the importance of tourism ethnocentrism in emerging tourism destinations, there is limited, but growing, research interest in this area. This study aims to respond to current calls for investigating mechanisms that can promote tourism ethnocentrism in both emerging and developed tourism destinations.