Search results

This study aims to develop a novel design method to make personalized masks for the effective prevention of pandemic respiratory infectious disease.

The changes in facial shape during speaking were analyzed using a three-dimensional (3D) scanning technique. In total, 13 anthropometric items were measured, and mask patterns were generated using a parametric pattern design method. Three sizing methods were proposed to reflect not only static but also dynamic body dimensions on the mask patterns.

A significant increase or decrease was observed in 10 out of 13 measurement items. Based on this, four items were selected to be used in the mask pattern design. The nose and cheek areas of a mask were fixed to protect the respiratory tract against viruses. The lower jaw area was deformed to improve the fit.

This study is expected to provide fundamental data to understand the changes in facial shape during movement. In addition, it is expected that the development of individualized personal protective equipment with movement adaptability will facilitate an effective response to various pandemic respiratory diseases.

In order to develop a personal protective equipment (PPE) that has a good fit and can protect against pandemic respiratory infectious diseases, morphological analysis was attempted using 3D facial data. It would be possible to design various products and equipment to be worn on the face by using the method proposed in this study.

The human body has the same basic size data but has different surface morphology, resulting in the unfitness even under the same size specification. The purpose of this study was to solve the local fitness problems by representing and quantifying the human surface morphological difference.

Firstly, the 3D point cloud for 323 female students was scanned, and the cross-section layers of the “waist-to-thigh” zone were determined. Secondly, the space vector based on the space Euclidean distance was extracted to represent and quantify the surface morphological difference. And the Principal Component Analysis and K-means were adopted to subdivide the target zone. Thirdly, the pattern based on the subdivision results and surface flattening was generated. Additionally, the fitness was evaluated by the subjective and objective assessments, separately.

The space vector could represent and quantify the shape morphology of the “waist-to-thigh” zone. It had successfully achieved the human body subdivision and corresponding pattern generation for the “waist-to-thigh” zone. And the pattern based on the shape subdivision and surface flattening of the space vector could effectively improve the wearing fitness. Particularly in the waist and crotch area of trousers, the obvious wrinkles had been solved because the space vector is more in line with the shape morphology characteristics.

The proposed method could represent and quantify the difference in human surface morphology in a 3D manner. It solved the unfitness problem caused by the same body size but different shape surface morphology. And it will contribute to the fitness improvement of the trousers.

3D printing has been warmly welcomed by clothing enterprises for its customization capacity in recent years. However, such clothing enterprises have to face the digital transformation challenges brought by 3D printing. Since the business model is a competitive weapon for modern enterprises, there is a research gap between business model innovation and digital transformation challenges for 3D-printing garment enterprises. The aim of the paper is to innovate a new business model for 3D-printing garment enterprises in digital transformation.

A business model innovation canvas (BMIC), a new method for business model innovation, is used to innovate a new 3D-printing clothing enterprises business model in the context of digital transformation. The business model canvas (BMC) method is adopted to illustrate the new business model. The business model ecosystem is used to design the operating architecture and mechanism of the new business model.

First, 3D-printing clothing enterprises are facing digital transformation, and they urgently need to innovate new business models. Second, mass customization and distributed manufacturing are important ways of solving the business model problems faced by 3D-printing clothing enterprises in the process of digital transformation. Third, BMIC has proven to be an effective tool for business model innovation.

The new mass deep customization-distributed manufacturing (MDC-DM) business model is universal. As such, it can provide an important theoretical reference for other scholars to study similar problems. The digital transformation background is taken into account in the process of business model innovation. Therefore, this is the first hybrid research that has been focused on 3D printing, garment enterprises, digital transformation and business model innovation. On the other hand, business model innovation is a type of exploratory research, which means that the MDC-DM business model’s application effect cannot be immediately observed and requires further verification in the future.

The new business model MDC-DM is not only applicable to 3D-printing garment enterprises but also to some other enterprises that are either using or will use 3D printing to enhance their core competitiveness.

A new business model, MDC-DM, is created through BMIC, which allows 3D-printing garment enterprises to meet the challenges of digital transformation. In addition, the original canvas of the MDC-DM business model is designed using BMC. Moreover, the ecosystem of the MDC-DM business model is constructed, and its operation mechanisms are comprehensively designed.

Sizing system is a fundamental topic in garment fitting. The purpose of this study was to assess the fit of existing police uniforms (shirt, jacket, overcoat and trousers) and develop a sizing system for upper and lower body uniforms of Amhara policemen in Ethiopia.

In total, 35 body dimensions of 889 policemen were taken through a manual anthropometric survey following the procedures in ISO 8559:1989 after each subject was interviewed on issues related to garment fit. The anthropometric data were pre-processed, key body dimensions were identified by principal components analysis and body types were clustered by the agglomerative hierarchical clustering algorithm and verified by the XGBoost classifier in a Python programming environment. The developed size charts were validated statistically using aggregate loss and accommodation rate.

About 44% of the subjects encountered fit problems every time they own new readymade uniforms. Lengths and side seams of shirts, and lengths and waist girths of trousers are the most frequently altered garment sites. Analysis of the anthropometric measurements resulted in 13 and 15 sizes for the upper and lower bodies, respectively. Moreover, the comparison of the developed upper garment size chart with the existing size chart for a shirt showed a considerable difference. This indicates that inappropriate size charts create fit problems.

The study considers the analysis of fit problems and sizing system development in a less researched country. Moreover, the proposed data mining procedure and its application for size chart development is unique and workable.

Online fashion retailers offer body measurement guidance, alongside their target consumer body size charts and fit information, to help consumers select the right size garment as the garment cannot be tried on. Its use by retailers suggests it can act as a means of mitigating garment returns as there has been a noted increase in returns due to incorrect size selection even though body measurement instructions are provided online. The purpose of this research is to determine how consumers interact with body measurement guidance, how they interpret it and use it, thereby interrogating its efficacy.

An exploratory investigation was undertaken. Thirty participants were recruited and given a choice of fashion retailers' body measurement guidance and a tape measure. They took their body measurements over their clothes. A technician repeated the task, thereby providing two sets of body measurements. A paired t-test determined if there was a significant difference in both values in terms of their mean. Technicians also documented their observations of how the participants interacted with the task. The content of the fashion retailer measurement guidance was then compared to that of published anthropometric guidance for surveys.

Participants were familiar with the guidance and tape-measure; they were able to self-measure. The fashion retailer measurement guidance, however, lacked detail/clarity in visuals and written content when compared to anthropometric guidance. Interpretation of the guidance differed between participant and technician. This resulted in a significant difference in circumference measurements for the bust/chest and hips, yet no significant difference in waist and inside-leg measurements. For measurements that were difficult to take unaided, participants devised novel practices which resulted in little divergence from the technician taken body measurements. The results question the guidance efficacy in its current form.

There has been no study which addresses how consumers interpret and interact with fashion retailers' online measurement guidance. This is important as this can mitigate garment returns. This research provides insight to influence fashion retailers' measurement guidance policy. It also adds to the existing body of knowledge surrounding anthropometric practice for clothing.

The findings indicated that fashion retailers need to revise their body measurement guidance content. The content needs to be more comprehensive but still use accessible language and visuals. The broader implications of this study highlight that traditional anthropometrics for self-taken body measurement needs developing as an emerging concept through clothing-related academic study.

Fashion retailers' measurement guidance needs to be more comprehensive but still use accessible language and visuals. The broader implications of this study highlight that traditional anthropometrics for self-taken body measurement needs further investigation and documentation as an emerging concept through clothing-related academic study.

This study explored the influence of personalized virtual try-on (PVTO) technology on consumer behavior in the apparel industry, focusing on decision comfort. It investigated how individuals’ spatial processing perception acts as a moderator in this context. Additionally, it examined the ease with which individuals imagine a product within the framework of this psychological mechanism.

Two experimental studies were conducted to evaluate the effects of PVTO technology on consumer decision comfort, with spatial processing perception as a moderating variable. The first experiment (n = 252) explored the impact of PVTO on decision comfort using photo-based simulations across various apparel items. The second experiment (n = 125) further examined these effects using measurement-based PVTO technologies to provide a deeper understanding of the role of spatial processing. Both studies employed a between-subjects design to isolate the influence of PVTO technology from other variables, ensuring a focused analysis of its effects on consumer behavior.

The findings indicated that the effects of PVTO are stronger for consumers with lower spatial perception abilities. Ease of imagining a product was identified as a mediator in the interactive effect between PVTO and spatial perception on decision comfort, demonstrating its pivotal role in online apparel shopping.

The findings indicated that the effects of PVTO are stronger for consumers with lower spatial perception abilities. Ease of imagining a product was identified as a mediator in the relationship between PVTO and decision comfort, demonstrating its pivotal role in online apparel shopping.

This study systematically explores the literature on global niche market strategies within the fashion industry to allow the mapping of niche practices and examine the benefits, success factors and characteristics of a niche strategy. Additionally, it identifies data gaps and necessitates a detailed examination to uncover areas with inadequate information.

This study utilized the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA 2020) method for systematic review and included 70 studies to analyze their findings.

This systematic literature review pinpoints niche strategies shaping the future of the fashion industry while developing sectors of the textile and apparel industry, fashion technology, fashion retail business, fashion media and communication, luxury fashion, sustainable fashion, adaptive clothing and transgender fashion within the fashion supply chain. A niche market strategy utilizes both pull and push marketing in the fashion industry. Scholarly literature commonly underscores the understanding of the consumer as a pivotal factor in the success of fashion niche market strategy.

This review offers a comprehensive overview of fashion niche strategy practices, aiming to inspire fashion industry professionals. It also serves as a guide for fashion industry professionals, summarizing best practices across various fashion industry sectors to help develop effective niche strategy competencies for firms.

This review thoroughly analyzes niche strategy implementation in the fashion industry, presenting an important resource for individuals new to this sector. It highlights the significance of niche strategies in improving the comprehension of emerging participants in the fashion business.

The purpose of this study is to explore the suggestions that construction processes could be considerably improved by integrating building information modelling (BIM) with 3D laser scanning technologies. This case study integrated 3D laser point cloud scans with BIM to explore the effects of BIM adoption on ongoing construction project, whilst evaluating the utility of 3D laser scanning technology for producing structural 3D models by converting point cloud data (PCD) into BIM.

The primary data acquisition adopted the use of Trimble X7 laser scanning process, which is a set of data points in the scanned space that represent the scanned structure. The implementation of BIM with the 3D PCD to explore the precision and effectiveness of the construction processes as well as the as-built condition of a structure was precisely captured using the 3D laser scanning technology to recreate accurate and exact 3D models capable of being used to find and fix problems during construction.

The findings indicate that the integration of BIM and 3D laser scanning technology has the tendency to mitigate issues such as building rework, improved project completion times, reduced project cost, enhanced interdisciplinary communication, cooperation and collaboration amongst the project duty holders, which ultimately enhances the overall efficiency of the construction project.

The acquisition of data using 3D laser scanner is usually conducted from the ground. Therefore, certain aspects of the building could potentially disturb data acquisition; for example, the gable and sections of eaves (fascia and soffit) could be left in a blind spot. Data acquisition using 3D laser scanner technology takes time, and the processing of the vast amount of data acquired is laborious, and if not carefully analysed, could result in errors in generated models. Furthermore, because this was an ongoing construction project, material stockpiling and planned construction works obstructed and delayed the seamless capture of scanned data points.

These findings highlight the significance of integrating BIM and 3D laser scanning technology in the construction process and emphasise the value of advanced data collection methods for effectively managing construction projects and streamlined workflows.

The purpose of this paper is to determine the effect of clothing fabrics, sizes and air ventilation rate on the volume and thickness of the air gap under the air ventilation garments (AVGs).

The geometric models of the human body and clothing were obtained by using a 3D body scanner. Then the distribution of the volume and thickness of the air gap for four clothing fabrics and three air ventilation rates (0L/S, 12L/S and 20L/S) were calculated by Geomagic software. Finally, a more suitable fabric was selected from the analysis to compare the distribution of the air gap entrapped for four clothing sizes (S, M, L and XL) and the three air ventilation rates.

The results show that the influence of air ventilation rate on the air gap volume and thickness is more obvious than that of the clothing fabrics and sizes. The higher is the air ventilation rate, the thicker is the air gap entrapped, and more evenly distributed is the air gap. It can be seen that the thickness of the air gap in the chest does not change significantly with the changes of the air ventilation rates, clothing fabrics and sizes, while the air gap in the waist is affected significantly.

This research provides a better understanding of the distribution of the air gap entrapped in ventilated garments, which can help in designing the optimal air gap dimensions and thus provide a basis and a reference for the design of the AVGs.

This study aims to evaluate the enhancement in prosthetic supply chain capabilities resulting from the implementation of additive manufacturing (AM) technologies. The study presents an emerging model outlining the key areas that undergo changes when integrating 3D printing technologies into the prosthetic supply chain.

Employing a qualitative approach, data were collected through field observations and 31 in-depth interviews conducted within various Jordanian organizations associated with the prosthetic industry and 3D printing technologies.

The findings suggest that the adoption of 3D printing technologies improves the prosthetic supply chain’s capabilities in terms of customization, responsiveness, innovation, environmental sustainability, cost minimization and patient empowerment. The study sheds light on the specific areas affected in the prosthetic supply chain following the adoption of 3D printing technologies, emphasizing the overall improvement in supply chain capabilities within the prosthetic industry.

This study provides recommendations for governmental bodies and prosthetic organizations to maximize the benefits derived from the use of 3D printing technologies.

This study contributes as the first of its kind in exploring the impact of 3D printing technology adoption in the Jordanian prosthetic industry, elucidating the effects on the supply chain and identifying challenges for decision-makers in an emerging market context.