Search results

Purpose – The purpose of this paper to immobilization provides biosorbent particle with density and mechanichal strength, immobilization can save the cost of separating from biomass, can be regeneration and to increase adsorption capacity for metal ions.

Design/Methodology/Approach – The parameters affecting the adsorption, such as initial metal ion concentration, pH, contact time, and temperature, were studied. The analysis of biosorbent functional group was carried out by Fourier Transform Infrared Spectroscopy, SEM-EDX, for elemental analysis.

Findings – Optimum pH condition for biosorption Cd(II) was pH 5, contact time was 45 min, and initial concentration was 250 mg/L. Biosorbent analysis was characterized using SEM-EDX and FTIR analysis. Kinetics adsorption was studied and analyzed in terms of the pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetics models. The result showed that the biosorption for Cd(II) ion followed the pseudo-second-order kinetic model. Biosorption data of Cd(II) ion at 300°K, 308°K, and 318°K was analyzed with Temkin, Langmuir, and Freundlich isotherms. Biosorption of Cd(II) by durian seed immobilization in alginate according to the Langmuir isotherm equation provided a coefficient correlation of r² = 0.939 and maximum capacity biosorption of 25.05 mg/g.

This study aims to propose a method known as the fuzzy technique for order preference by similarity to ideal solution (fuzzy TOPSIS) for complex project selection in organizations. To fulfill study objectives, the factors responsible for making a project complex are collected through literature review, which is then analyzed by fuzzy TOPSIS, based on three decision-makers’ opinions.

The selection of complex projects is a multi-criteria decision-making (MCDM) process for global organizations. Traditional procedures for selecting complex projects are not adequate due to the limitations of linguistic assessment. To crossover such limitation, this study proposes the fuzzy MCDM method to select complex projects in organizations.

A large-scale engine manufacturing company, engaged in the energy business, is studied to validate the suitability of the fuzzy TOPSIS method and rank eight projects of the case company based on project complexity. Out of these eight projects, the closeness coefficient of the most complex project is found to be 0.817 and that of the least complex project is found to be 0.274. Finally, study outcomes are concluded in the conclusion section, along with study limitations and future works.

The outcomes from this research may not be generalized sufficiently due to the subjectivity of the interviewers. The study outcomes support project managers to optimize their project selection processes, especially to select complex projects. The presented methodology can be used extensively used by the project planners/managers to find the driving factors related to project complexity.

The presented study deliberately explained how complex projects in an organization could be select efficiently. This selection methodology supports top management to maintain their proposed projects with optimum resource allocations and maximum productivity.

This paper aims to present the vertical integration state-of-the-art and propose an expansion of the operations and supply chain management (OSCM) field by identifying gaps and bottlenecks.

This paper uses a systematic literature review based on a sample of 173 OSCM field articles, collected from Scopus and Web of Science databases.

There are no single factors, such as future costs, structures or skills development, in the decision to vertically integrate operations. It is necessary to combine the vision of production costs with the perspective of governance and transaction costs. In addition, it is essential to consider the competency perspective and its impact on capability building.

Few studies have attempted to understand how vertical integration is used in terms of OSCM research themes and theories. Vertical integration can help companies face challenges and serve as a potential solution for achieving better prices, demand control and quality management.

The significant role of vertical integration mechanisms in supply chains is crucial for managers evaluating a firm's reconfiguration with more vertical operations. Policymakers interested in supporting the smoothness of vertical integration decisions in regulatory agencies play a key role as contingencies.

In times of global challenges, vertical integration is a strategy known to be more effective for firms to obtain a competitive advantage, making them more resilient.

This paper addresses gaps in the vertical integration theme and provides insights for future research development.

This article aims to map the expectations of manufacturing companies towards suppliers in terms of implementing improvement activities. The article poses two research questions: RQ1: What kind of improvement of activities do the surveyed producers expect from their suppliers? RQ2: Do factors such as size, capital or implemented systems influence different assessments of the analyzed requirements toward suppliers?

The Computer Assisted Telephone Interview (CATI) technique was used to collect data. The sample consists of 150 producers (employing over 50 people) who were suppliers for enterprises from the automotive, electromechanical and chemical sectors operating in the Polish business-to-business (B2B) market. We analyzed 11 improvement activities, while their correlation structure was examined by exploratory factor analysis.

We have identified three latent factors – risk reduction, product innovation and increasing efficiency – which summarize the main expectations of manufacturing companies towards suppliers. Expectations for these factors are independent of the implemented management system, although the analysis showed higher expectations for product innovation in organizations with the implementation of Kaizen.

The article fills the research gap in the literature. The research results presented in the literature so far have focused on the expectations of enterprises towards suppliers in terms of meeting the criteria for their initial and periodic assessment. The research gap in the article is the result of empirical research presenting the expectations of manufacturers towards suppliers in terms of improving their processes. Based on the findings of the presented study, development trends and implications for managers responsible for purchasing processes and relationships with suppliers can be determined.

This study aims to examine the micromechanisms of how knowledge culture fosters human capital development.

An empirical model was developed by using the structural equation modeling method based on a sample of 321 Polish knowledge workers employed in different industries.

This study provides direct empirical evidence that tacit knowledge sharing supports human capital, whereas tacit knowledge hiding does not, and this hiding is considered a waste of knowledge. If tacit knowledge does not circulate within an organization, it is a severe waste of an organization. The findings indicate that shame from making mistakes might impede the sharing of knowledge gained from making those mistakes, and in such cases, the knowledge remains hidden.

Leaders aiming to ensure human capital growth should implement an authentic learning culture composed of a learning climate and mistakes acceptance components that enable open discussion about mistakes on each organizational level.

The knowledge culture is found to be an essential element of building human capital but, at the same time, not sufficient without a learning culture, and its mistakes acceptance component. A permanent organizational learning mode that supports a continuous organizational shared mental model reframing is an antidote to tacit knowledge hiding.

The ethics literature has focused on the influence of self-construal dimensions on unethical decision-making. However, the literature is unclear about why these self-construal dimensions (Independent-self, Relational-self, Collective-self) impact differently on unethical decision-making. Based on the theory of cooperation and competition, this study empirically examines the mediating role of competitive orientation and addresses the theoretically unexplained question of why self-construal dimensions influence differently on unethical decision-making.

Based on the deductive approach, a quantitative research study was conducted on the Sri Lankan banking industry because there have been many instances of unethical behavior reported in this sector lately. Data were collected from 305 bank branch managers using a structured survey questionnaire.

The findings revealed that competitive orientation mediates the self-construal dimensions and explained that competitive orientation is one reason why independent-self, relational-self and collective-self influence differently on unethical decision-making.

This paper addresses the unanswered question of why self-construal dimensions relate to unethical decision-making differently.

This study aims to analyse whether and when victim incivility may be related to work-to-family conflict and then burnout among emergency workers.

A total of 304 Italian emergency workers from five firehouses and six emergency rooms completed questionnaires, examining: victim incivility, work-to-family conflict, social support seeking and burnout symptoms. Descriptive analyses, confirmatory factor analyses and structural equation models were conducted.

Victim incivility was positively associated with burnout symptoms, both directly and indirectly, as mediated by work-to-family conflict. Additionally, social support seeking exacerbated (rather than mitigated) the impact of work-to-family conflict on burnout symptoms.

Organisations can greatly benefit from implementing family-friendly practices and providing their workers with training programmes on how to deal with difficult victims.

This study contributes to the existing literature on workplace incivility and work–life interface by supporting for the first time the notion that victim incivility can spill over into emergency workers' family domain and by clarifying how and when victim incivility is related to burnout symptoms.