Search results

Soil nutrient management and fertilizer use by farmers are important for sustainable grain production. The authors examined the effect of an experimental agricultural extension program, the science and technology backyard, in promoting sustainable soil nutrient management in the North China Plain (NCP). The science and technology backyard integrates farmer field schools, field demonstrations, and case-to-case counselling to promote sustainable farming practices among rural smallholders.

The authors conducted a large-scale household survey of more than 2,000 rural smallholders. The authors used a multivariate regression analysis as the benchmark to assess the effect of the science-and-technology backyard on smallholder soil nutrient management. Furthermore, the authors used coarse exact matching (CEM) methods to control for potential bias due to self-selection and the (endogenous) switching regression approach as the main empirical analysis.

The results show that the science-and-technology backyard program increased smallholders' wheat yield by approximately 0.23 standard deviation; however, no significant increase in maize yield was observed. Regarding soil nutrient use efficiency, the authors found a significant improvement in smallholders' phosphorus and potassium use efficiencies for both wheat and maize production, and a significant improvement in nitrogen use efficiency for wheat production, but no significant improvement of nitrogen use efficiency for maize production.

This study evaluated a novel participatory agricultural extension model to improve soil nutrient management practices among smallholders. The integration of agronomists' scientific knowledge and smallholders' local contextual experiences could be an effective way to improve farmers' soil nutrient management. This study provides the first quantitative estimates based on rigorous impact assessment methods of this novel extension approach in rural China.

The aim of this paper is to assess whether the current European target to increase the areas under organic farming to 25% by 2030 is attainable and whether the simple increase in areas under organic farming may be sufficient to improve the sustainability of European agriculture.

The analysis has been carried out through a simple data processing related to areas under organic farming, for the period 2012–2020 (Eurostat database), in order to highlight the trends of areas under organic farming and to verify whether the annual average change rates may be compatible with the stated target.

The analysis showed that organic farming has a productive weight not corresponding to the amount on the total of the areas under cultivation and a small impact on the total of food consumption. It is a plausible hypothesis, the one that shows the increase in areas under organic farming will engage forms of agriculture and farms that, already, are more sustainable, so the achievement of 25% target will not particularly impact the European potential productive and the less environmental sustainable forms of agriculture.

This paper contributes to the debate, involving scientific community, policy maker and civil society, about the real contribution of organic farming to sustainability, and it will be developed in future research.

As the contradiction between economic development, resource and environment has become increasingly prominent, low-carbon competitiveness has received worldwide focus. This study aims to examine low-carbon competitiveness in 31 provinces (cities and regions) of China.

An evaluation index system for low-carbon competitiveness in China has been constructed, which is composed of 25 economic, social, environmental and policy indicators. To study the state of low-carbon competitiveness and resistance to China’ development of low-carbon competitiveness, this study uses a combination of the catastrophe progression model, the spatial autocorrelation model and the barrier method.

China’ low-carbon competitiveness gradually decreases from coastal to inland areas: the Tibet and Ningxia Hui autonomous regions are the least competitive regions, while the Shandong and Jiangsu provinces are the most competitive areas. The spatial correlation of the 31 provinces’ low-carbon competitiveness is very low and lacks regional cooperation. This study finds that the proportion of a region’ wetland area, the proportion of tertiary industries represented in its GDP and afforestation areas are the main factors in the development of low-carbon competitiveness. China should become the leader of carbon competitiveness by playing the leading role in the Eastern Region, optimizing the industrial structure, improving government supervision and strengthening environmental protection.

The paper provides a quantitative reference for evaluating China’ low-carbon competitiveness, which is beneficial for environmental policymaking. In addition, the evaluation and analysis methods offer relevant implications for developing countries.

This study aims to analyze the influence of farmers’ degree of participation in collective action on their adoption decisions and waiting time regarding soil and water conservation (SWC) measures.

The Probit model and Generalized Propensity Score Match method are used to assess the effect of the degree of participation in collective action on farmers’ adoption decisions and waiting time for implementing SWC measures.

The findings reveal that farmers’ engagement in collective action positively influences the decision-making process regarding terrace construction, water-saving irrigation and afforestation measures. However, it does not significantly impact the decision-making process for plastic film and ridge-furrow tillage practices. Notably, collective action has the strongest influence on farmers’ adoption decisions regarding water-saving irrigation technology, with a relatively smaller influence on the adoption of afforestation and terrace measures. Moreover, the results suggest that participating in collective action effectively reduces the waiting time for terrace construction and expedites the adoption of afforestation and water-saving irrigation technology. Specifically, collective action has a significantly negative effect on the waiting time for terrace construction, followed by water-saving irrigation technology and afforestation measures.

The results of this study underscore the significance of fostering mutual assistance and cooperation mechanisms among farmers, as they can pave the way for raising funds and labor, cultivating elite farmers, attracting skilled labor to rural areas, enhancing the adoption rate and expediting the implementation of terraces, water-saving irrigation technology and afforestation measures.

Drawing on an evaluation of farmers’ degree of participation in collective action, this paper investigates the effect of participation on their SWC adoption decisions and waiting times, thereby offering theoretical and practical insights into soil erosion control in the Loess Plateau.

Numerous metals can be processed using the additive manufacturing process laser-based powder bed fusion of metals (PBF-LB/M, ISO/ASTM 52900). The main advantages of additive manufacturing technologies are the high degree of design freedom and the cost-effective implementation of lightweight structures. This could be profitable for gears with increased power density, combining reduced mass with considerable material strength. Current research on additively manufactured gears is focused on developing lightweight structures but is seldom accompanied by simulations and even less by mechanical testing. There has been very little research into the mechanical and material properties of additively manufactured gears. The purpose of this study is to investigate the behavior of lightweight structures in additively manufactured gears under static loads.

This research identifies the static load-carrying capacity of helical gears with different lightweight structures produced by PBF-LB/M with the case hardening steel 16MnCr5. A static gear loading test rig with a maximum torque at the pinion of T₁ = 1200 Nm is used. Further focus is set on analyzing material properties such as the relative density, microstructure, hardness depth profile and chemical composition.

All additively manufactured gear variants show no failure or plastic deformation at the maximum test load. The shaft hub connection, the lightweight hub designs and the gearing itself are stable and intact regarding their form and function. The identified material characteristics are comparable to conventionally manufactured gears (wrought and machined), but also some particularities were observed.

This research demonstrates the mechanical strength of lightweight structures in gears. Future research needs to consider the dynamic load-carrying capacity of additively manufactured gears.

To decrease wear and friction, zinc dialkyldithiophosphate (ZDDP) has been used in engine oil for several decades, but the mechanism of the tribofilm formation is still unclear. The purpose of this study is to characterize the chemical details of the tribofilm by using high-resolution approaching.

An ISO VG 100 mineral oil mixed with ZDDP was used in sliding tests on cylindrical roller bearings. Tribofilm formation was observed after 2 h of the sliding test. X-ray photoelectron spectroscopy (XPS) and atom probe tomography (APT) were used for chemical analysis of the tribofilm.

The results show that the ZDDP tribofilm consists of the common ZDDP elements along with iron oxides. A considerable amount of zinc and a small amount of sulfur were observed. In particular, an oxide interlayer with sulfur enrichment was revealed by APT between the tribofilm and the steel substrate. The depth profile of the chemical composition was obtained, and a tribofilm of approximately 40 nm thickness was identified by XPS.

A sulfur enrichment at the interface is observed by APT, which is beneath an oxygen enrichment. The clear evidence of the S interlayer confirms the hard and soft acids and bases principle.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2020-0035/

This study examines how accounting tools and techniques are used to create and support membership and reporting boundaries for a multi-entity sustainability scheme. It also considers whether boundary setting for this initiative helps to connect corporate activity with planetary boundaries and the SDGs.

A case study of a national agrifood sustainability scheme, analysing extensive documentary data and multi-entity sustainability reports. The concept of partial organising is used to frame the analysis.

Accounting, in the form of planning, verification, target setting, annual review and reporting, can be used to create a membership and a reporting boundary. Accounting tools and techniques support the scheme's standard-setting and monitoring elements. The study demonstrates that the scheme offers innovation in how sustainability reporting is managed. However, it does not currently provide a cumulative assessment of the effect of the sector's activity on ecological carrying capacity or connect this activity to global sustainability indicators.

Future research can build on this study's insights to further develop our understanding of multi-entity sustainability reporting and accounting's role in organising for sustainability. The authors identify several research avenues including: boundary setting in ecologically significant sectors, integrating global sustainability indicators at sectoral and organisational levels, sustainability controls in multi-entity settings and the potential of multi-entity reporting to provide substantive disclosure.

This paper provides insight into accounting's role in boundary setting for a multi-entity sustainability initiative. It adds to our understanding of the potential of a multi-entity reporting boundary to support connected measurement between corporate activity and global sustainability indicators. It builds on work on partial organising and provides insight into how accounting can support this form of organising for sustainability.

Using a combination of the geographical information system (GIS) and the Canadian water quality index (WQI), the current study sought to provide a long-term general assessment of the water quality of the Shatt Al-Arab River (SAAR), focusing on its suitability for living organisms. Likewise, SPSS statistics was used to develop a nonlinear WQI regression model for the study area.

The study required four decades of data collection on some environmental characteristics of river water. After that, calculate the WQI and conduct the spatial analysis. Eight variables in total, including water temperature, dissolved oxygen, potential hydrogen ions, electrical conductivity (EC), biological oxygen demand, turbidity, nitrate and phosphate, were chosen to calculate the WQI.

Throughout the study periods, the WQI values varied from 55.2 to 79.83, falling into the categories of four (marginal) and three (fair), with the sixth period (2007–2008) showing the most decline. The present research demonstrated that the high concentration of phosphates, the high EC values, and minor changes in the other environmental factors are the major causes of the decline in water quality. The variations in ecological variables' overlap are a senior contributor to changes in water quality in general. Notably, using GIS in conjunction with the WQI has shown to be very effective in reducing the time and effort spent on investigating water quality while obtaining precise findings and information at the lowest possible expense. Calibration and validation of the developed model showed that this model had a perfect estimate of the WQI value. Due to its flexibility and impartiality, this study recommends using the proposed model to estimate and predict the WQI in the study area.

Even though the water quality of the SAAR has been the subject of numerous studies, this is the only long-term investigation that has been done to evaluate and predict its water quality.