Search results

The purpose of this paper is to fit a logit model for dry bulkers transporting grains through the Panama Canal versus alternative routes destined to East Asia, originating on the US Gulf and East Coast. This is with the purpose of better understanding the attributes.

In this paper, grain transits both through the Panama Canal and alternative routes, which are examined, and a logit model is developed to explain the route decision from a carrier/vessel operator point of view.

Transit draft is the most important attribute in the route decision process for grains according to this study. Also, Panamax bulkers are the preferred vessel size into China, especially through the Cape of Good Hope route, impacting Panama Canal’s market share for grains.

This research used only a full year of grain traffic data approximating fiscal year 2018 (October 1, 2017 to September 30, 2018). Data will come mostly from the Panama Canal transit data and observations using IHS’s Market Intelligence Network (MINT).

This paper is highly dependent on visual observations of grains vessels through alternative routes using AIS data from MINT software.

This study aims to propose a semiempirical and semitheoretical cyclic compaction constitutive model of coarse-grained soil filler for the high-speed railway (HSR) subgrade under cyclic load.

According to the basic framework of critical state soil mechanics and in view of the characteristics of the coarse-grained soil filler for the HSR subgrade to bear the train vibration load repeatedly for a long time, the hyperbolic empirical relationship between particle breakage and plastic work was derived. Considering the influence of cyclic vibration time and stress ratio, the particle breakage correction function of coarse-grained soil filler for the HSR subgrade under cyclic load was proposed. According to the classical theory of plastic mechanics, the shearing dilatation equation of the coarse-grained soil filler for the HSR subgrade considering particle breakage was modified and obtained. A semiempirical and semitheoretical cyclic compaction constitutive model of coarse-grained soil filler for the HSR subgrade under cyclic load was further established. The backward Euler method was used to discretize the constitutive equation, build a numerical algorithm of “elastic prediction and plastic modification” and make a secondary development of the program to solve the cyclic compaction model.

Through the comparison with the result of laboratory triaxial test under the cyclic loading of coarse-grained soil filler for the HSR subgrade, the accuracy and applicability of the cyclic compaction model were verified. Results show that the model can accurately predict the cumulative deformation characteristics of coarse-grained soil filler for the HSR subgrade under the train vibration loading repeatedly for a long time. It considers the effects of particle breakage and stress ratio, which can be used to calculate and analyze the stress and deformation evolution law of the subgrade structure for HSR.

The research can provide a simple and practical method for calculating deformation of railway under cyclic loading.

The purpose of this paper is to examine the impacts of farmland renting-in on planted grain acreage.

A survey data of five counties were analyzed with the two-stage ordinary least squares model.

Households renting-in land trended to plant more maize, and the more land was rented by a household the more maize was planted, while wheat acreage showed non-response to farmland renting-in.

Overall, the analysis suggests that policy makers should be prepared for different changing trends of grain crop acreage across the nation as farmland transfer continues. Future research should pay attention to the effect of farmland transfer on agricultural productivity and rural household income growth.

As the Chinese Government is promoting larger-scale and more mechanized farms as a way of protecting grain security, it is important to understand whether farmland renting-in will reduce planted grain acreage. This study provides empirical evidence showing the answer to that question may differ across different regions and depend on the particular grain crop in question.

This study revisits the Great Canadian Grain Logistics Crisis of 2013-14 to explore the competitiveness of the country's grain exports. An approach to comprehending the dilemmas of the international grain supply chain and trade, and national logistics policy in an era of multinational corporations, draws upon the literature on global value chain analysis. This analysis identifies both the grain industry's global and local dimensions. An important literature on the 'politics’ of the supply chain is also called into play to discuss who controls what aspects. This task of interpreting the various steps in Canada's grain logistics chain recognizes the key economic actors - producers, grain companies, railway companies, port terminal operators and export buyers - and political struggles between them as they each seek to maximize their self-interest. Policy implications for streamlining logistics operations are drawn from identifying where changes in the supply chain arrangements have gained or lost opportunities in export markets, particularly in the Asia-Pacific region.

Molecular dynamics is an emerging simulation technique in the field of machining in recent years. Many researchers have tried to simulate different processing methods of various materials with the theory of molecular dynamics (MD), and some preliminary conclusions have been obtained. However, the application of MD simulation is more limited compared with traditional finite element model (FEM) simulation technique due to the complex modeling approach and long computation time. Therefore, more studies on the MD simulations are required to provide a reliable theoretical basis for the nanoscale interpretation of grinding process. This study investigates the crystal structures, dislocations, force, temperature and subsurface damage (SSD) in the grinding of iron-nickel alloy using MD analysis.

In this study the simulation model is established on the basis of the workpiece and single cubic boron nitride (CBN) grit with embedded atom method and Morse potentials describing the forces and energies between different atoms. The effects of grinding parameters on the material microstructure are studied based on the simulation results.

When CBN grit goes through one of the grains, the arrangement of atoms within the grain will be disordered, but other grains will not be easily deformed due to the protection of the grain boundaries. Higher grinding speed and larger cutting depth can cause greater impact of grit on the atoms, and more body-centered cubic (BCC) structures will be destroyed. The dislocations will appear in grain boundaries due to the rearrangement of atoms in grinding. The increase of grinding speed results in the more transformation from BCC to amorphous structures.

This study is aimed to study the grinding of Fe-Ni alloy (maraging steel) with single grit through MD simulation method, and to reveal the microstructure evolution within the affected range of SSD layer in the workpiece. The simulation model of polycrystalline structure of Fe-Ni maraging steel and grinding process of single CBN grit is constructed based on the Voronoi algorithm. The atomic accumulation, transformation of crystal structures, evolution of dislocations as well as the generation of SSD are discussed according to the simulation results.

The purpose of this paper is to report on the developments in manufacturing soft magnetic materials using laser powder bed fusion (L-PBF).

Ternary soft magnetic Fe-49Co-2V powder was produced by gas atomization and used in an L-PBF machine to produce samples for material characterization. The L-PBF process parameters were optimized for the material, using a design of experiments approach. The printed samples were exposed to different heat treatment cycles to improve the magnetic properties. The magnetic properties were measured with quasi-static direct current and alternating current measurements at different frequencies and magnetic flux densities. The mechanical properties were characterized with tensile tests. Electrical resistivity of the material was measured.

The optimized L-PBF process parameters resulted in very low porosity. The magnetic properties improved greatly after the heat treatments because of changes in microstructure. Based on the quasi-static DC measurement results, one of the heat treatment cycles led to magnetic saturation, permeability and coercivity values comparable to a commercial Fe-Co-V alloy. The other heat treatments resulted in abnormal grain growth and poor magnetic performance. The AC measurement results showed that the magnetic losses were relatively high in the samples owing to formation of eddy currents.

The influence of L-PBF process parameters on the microstructure was not investigated; hence, understanding the relationship between process parameters, heat treatments and magnetic properties would require more research.

The relationship between microstructure, chemical composition, heat treatments, resistivity and magnetic/mechanical properties of L-PBF processed Fe-Co-V alloy has not been reported previously.

Confronting the unveiled sophisticated structural and physical characteristics of permanent magnets, notably the samarium–cobalt (Sm-Co) alloy, This work aims to introduce a simulation scheme that can link physics-based micromagnetics on the nanostructures and magnetostatic homogenization on the mesoscale polycrystalline structures.

The simulation scheme is arranged in a multiscale fashion. The magnetization behaviors on the nanostructures examined with various orientations are surrogated as the micromagnetic-informed hysterons. The hysteresis behavior of the mesoscale polycrystalline structures with micromagnetic-informed hysterons is then evaluated by computational magnetostatic homogenization.

The micromagnetic-informed hysterons can emulate the magnetization reversal of the parameterized Sm-Co nanostructures as the local hysteresis behavior on the mesostructures. The simulation results of the mesoscale polycrystal demonstrate that the demagnetization process starts from the grain with the largest orientation angle (a) and then propagates to the surrounding grains.

The presented scheme depicts the demand for integrating data-driven methods, as the parameters of the surrogate hysteron intrinsically depend on the nanostructure and its orientation. Further hysteron parameters that help the surrogate hysteron emulate the micromagnetic-simulated magnetization reversal should be examined.

This work provides a novel multiscale scheme for simulating the polycrystalline permanent magnets’ hysteresis while recapitulating the nanoscale mechanisms, such as the nucleation of domains, and domain wall migration and pinning. This scheme can be further extended to simulate the part-level hysteresis considering the mesoscale features.

Improving the competitiveness of East Africa's rice industries necessitates increased and viable production of rice of the quality desired by consumers. This paper aims to understand consumer preferences for rice quality attributes in Uganda and Kenya to inform the countries' rice breeding programs and value chain development interventions.

Rice samples are obtained from retail markets in various districts/counties across the two countries. The samples are analyzed in a grain quality laboratory for the rice's physicochemical characteristics and the resulting data are used to non-parametrically estimate hedonic price functions. District/county dummies are included to account for potential heterogeneity in consumer preferences.

Ugandan consumers are willing to pay a price premium for rice with a relatively high proportion of intact grains, but the consumers discount chalkiness. Kenyan consumers discount high amylose content and impurities. There is evidence of heterogeneity in consumer preferences for rice in Mbale, Butaleja and Arua districts of Uganda and in Kericho and Busia counties of Kenya.

The study makes a novel contribution to the literature on consumer preferences for rice in East Africa by applying a hedonic pricing model to the data generated from a laboratory analysis of the physicochemical characteristics of rice samples obtained from the market. Rather than base our analysis on consumers' subjective sensory assessment of the quality characteristics of rice, standard laboratory methods are used to generate the data, which enables a more objective assessment of the relationship between market prices and the quantities of attributes present in the rice samples.

Corporate social responsibility (CSR) is significant in the financial market. Despite plenty of existing research on CSR, few studies have quantified the fine-grained aspects of CSR and examined how diverse CSR aspects are associated with firms' trade credit. Based on the released CSR reports, this paper strives to measure the CSR fulfillment of firms and examine the relationships between CSR and trade credit in terms of textual features presented in these reports.

This research proposes a natural language processing-based framework to extract the overall readability and the sentiment of fine-grained aspects from CSR reports, which can signal the performance of firms' CSR in diverse aspects. Furthermore, this paper explores how the textual features are associated with trade credit through partial dependence plots (PDPs), and PDPs can generate both linear and nonlinear relationships.

The study’s results reveal that the overall readability of the reports is positively associated with trade credit, while the performance of the fine-grained CSR aspects mentioned in the CSR reports matters differently. The performance of the environment has a positive impact on trade credit; the performance of creditors, suppliers and information disclosure, shows a U-shaped influence on trade credit; while the performance of the government and customers is negatively associated with trade credit.

This study expands the scope of research on CSR and trade credit by investigating fine-grained aspects covered in CSR reports. It also offers some managerial implications in the allocation of CSR resources and the presentation of CSR reports.