Search results

This paper aims to perform thermal and mechanical characterization for silver-based sintered thermal joints. Layer quality affects thermal and mechanical performance, and it is important to achieve information about how materials and process parameters influence them.

Thermal investigation of the thermal joints analysis method was focused on determination of thermal resistance, where temperature measurements were performed using infrared camera. They were performed in two modes: steady-state analysis and dynamic analysis. Mechanical analysis based on measurements of mechanical shear force. Additional characterizations based on X-ray image analysis (image thresholding), optical microscope of polished cross-section and scanning electron microscope image analysis were proposed.

Sample surface modification affects thermal resistance. Silver metallization exhibits the lowest thermal resistance and the highest mechanical strength compared to the pure Si surface. The type of dynamic analysis affects the results of the thermal resistance.

Investigation of the layer quality influence on mechanical and thermal performance provided information about different joint types.

This paper aims to develop thermal analysis method of thermal joints characterization. The impact on convection on thermal resistance analysis with use thermography for silver-based thermal joints were investigated for non-metallized and metalized semiconductor surfaces. Heat transfer efficiency depends on thermal conductivity; radiation was used to perform thermographic analysis; the convection is energy loss, so its removing might improve measurements accuracy.

Investigation of thermal joints analysis method was focused on determination of convection impact on thermal resistance thermographic analysis method. Measuring samples placed in vacuum chamber with lowered pressure requires transparent window for infrared radiation that is used for thermographic analysis. Impact of infrared window and convection on temperature measurements and thermal resistance were referred.

The results showed that the silicon window allowed to perform thermal analysis through, and the convection was heat transfer mode which create 15% energy loss.

It is possible to measure thermal resistance for silver-based thermal joints with convection eliminated to improve measurements accuracy.

In this paper, we examine the comparative advantage of Korea and China while focusing on their technology level. The three digit SITC (Standard International Trade Classification) data is classified by technology level and the revealed comparative advantage (RCA) is derived from 1992-2009 by using UN COMTRADE data. For careful interpretation of the comparative advantage and technology levels, we also examined intra-industry trade and unit values of bilateral Korea-China trade, and semi-conductor industry technology. We found that the revealed comparative advantage has moved from low technology products to high technology products in Korea. China still maintains a comparative advantage in low technology products such as textiles and clothing, but at the same time, China’s high and medium-high technology products have recently gained a comparative advantage. The perception that China only has a comparative advantage for labor intensive products with low technology should be changed based on our analysis. However, China’s advancement in technology should not be overestimated. When comparing the unit value of basic materials of Korea’s and China’s exports, we found that Korea’s export product prices are on average higher than that of China’s, although the gap is reducing. A wider technology gap between Korea and China still exists in the semi-conductor industry, which is one of the most advanced high technology industries throughout the world.

Deployment of deep neural networks on embedded devices is becoming increasingly popular because it can reduce latency and energy consumption for data communication. This paper aims to give out a method for deployment the deep neural networks on a quad-rotor aircraft for further expanding its application scope.

In this paper, a design scheme is proposed to implement the flight mission of the quad-rotor aircraft based on multi-sensor fusion. It integrates attitude acquisition module, global positioning system position acquisition module, optical flow sensor, ultrasonic sensor and Bluetooth communication module, etc. A 32-bit microcontroller is adopted as the main controller for the quad-rotor aircraft. To make the quad-rotor aircraft be more intelligent, the study also proposes a method to deploy the pre-trained deep neural networks model on the microcontroller based on the software packages of the RT-Thread internet of things operating system.

This design provides a simple and efficient design scheme to further integrate artificial intelligence (AI) algorithm for the control system design of quad-rotor aircraft.

This method provides an application example and a design reference for the implementation of AI algorithms on unmanned aerial vehicle or terminal robots.

Crystallization is the process widely used for components separation and solids purification. The systems for crystallization process evaluation applied so far, involve numerous non-invasive tomographic measurement techniques which suffers from some reported problems. The purpose of this paper is to show the abilities of three-dimensional Electrical Capacitance Tomography (3D ECT) in the context of non-invasive and non-intrusive visualization of crystallization processes. Multiple aspects and problems of ECT imaging, as well as the computer model design to work with the high relative permittivity liquids, have been pointed out.

To design the most efficient (from a mechanical and electrical point of view) 3D ECT sensor structure, the high-precise impedance meter was applied. The three types of sensor were designed, built, and tested. To meet the new concept requirements, the dedicated ECT device has been constructed.

It has been shown that the ECT technique can be applied to the diagnosis of crystallization. The crystals distribution can be identified using this technique. The achieved measurement resolution allows detecting the localization of crystals. The usage of stabilized electrodes improves the sensitivity of the sensor and provides the images better suitable for further analysis.

The dedicated 3D ECT sensor construction has been proposed to increase its sensitivity in the border area, where the crystals grow. Regarding this feature, some new algorithms for the potential field distribution and the sensitivity matrix calculation have been developed. The adaptation of the iterative 3D image reconstruction process has also been described.

This study aims to examine the trend of industrial competition between the US and China, which is the most crucial determinant in the future development of the global economy. For decades, the global economy has strengthened the global production network based on the division of labor between countries. Thus, the ripple effect of competition between the two countries should be analyzed in terms of the global production network. Therefore, this study uses the product space model, which explains the development process of industries with comparative advantage by country. We constructed the model based on the products of HS 4-digit code for the 2010–2019 period. The analysis results on the trend of the industrial competitiveness of major countries are as follows. First, the current industrial competitiveness of China is concentrated on low-tech industries. In the case of high-tech items, China shows a tendency of lower export sophistication compared to major manufacturing powerhouses such as Germany, the US, Japan, and Korea. Second, with respect to the possibility of a future industrial structure upgrade evaluated by density, the trend of China overtaking other manufacturing powerhouses is observed. As implied by the product space model, the advancement of the industrial structure through active participation in international trade enhances the industrial competitiveness. Therefore, the outcome of US-China industrial competition depends on who ensures more openness and industrial complexity.

This paper contributes to the theory of the relationship between human resource management (HRM) and innovation at small- to medium-sized enterprises (SMEs) by conducting a conceptual analysis of the question why Germany boasts by far the highest number of “Hidden Champion” SMEs. This is done by case studies from the army and public financial management of aid disbursal in developing countries. Implications for HRM at SMEs are discussed.

Conceptual analysis using case studies.

Contributing towards filling the gap concerning theoretical underpinnings of the link between HRM and innovation, we suggest that interdisciplinary work from relevant organisational case studies indicates that the concept of institutional design to provide motivational incentives may be relevant, especially concerning high performance systems with bundles of HRM practices. Specifically, the fundamental principle of subsidiarity is found to be important.

The research is broadly applicable to organisations of all kinds, as the diverse case studies indicate. We point towards tentative implications for the firms that account for the majority of the work force, namely SMEs, and among them the most successful ones, the so-called “Hidden Champions”.

HR managers can improve motivation, performance and innovation by decentralising decision-making as far as possible, while ensuring the overall organisational goals are well understood and shared, and resources are dedicated to train and educate staff. Additionally, the conception of rank-order competitions complements the institutional design.

Greater productivity and material performance as well as greater job satisfaction via larger autonomy and decision-making power on the local level can be achieved by the application of subsidiarity as key HRM configuration. This can be employed at SMEs, as discussed, but also other organisations. Further, the principle of subsidiarity and the greater emphasis on staff training and education may help reduce inequality.

Our paper contributes towards filling the gap in the literature on the link between HRM and innovation, by identifying the role of subsidiarity. We introduce an interdisciplinary perspective, with contributions from economics and psychology, among others. We also contribute to the history of HRM.

This paper aims at examining the dynamic patterns and traits of bilateral trade between Korea and Vietnam. The major findings of this paper can be summarized as follows. First, the structure of trade between Korea and Vietnam conforms to each country’s factor proportion. Second, the structure of Korea’s imports from Vietnam did not change over the last two decades. In other words, Vietnam has failed to climb up the industrial ladder. Third, the degree of intra-industry trade between Korea and Vietnam has been low and unstable. Fourth, the trade pattern between Korea and Vietnam has been complementary not competitive in nature. Korea-Vietnam FTA will open a new horizon for the deeper vertical integration of the two.

This article introduces the Special Issue on Sustainable Management of Heritage Buildings in long-term perspective.

It starts by reviewing the gaps in knowledge and practice which led to the creation and implementation of the research project SyMBoL—Sustainable Management of Heritage Buildings in long-term perspective funded by the Norwegian Research Council over the 2018–2022 period. The SyMBoL project is the motivation at the base of this special issue.

The editorial paper briefly presents the main outcomes of SyMBoL. It then reviews the contributions to the Special Issue, focussing on the connection or differentiation with SyMBoL and on multidisciplinary findings that address some of the initial referred gaps.

The article shortly summarizes topics related to sustainable preservation of heritage buildings in time of reduced resources, energy crisis and impacts of natural hazards and global warming. Finally, it highlights future research directions targeted to overcome, or partially mitigate, the above-mentioned challenges, for example, taking advantage of no sestructive techniques interoperability, heritage building information modelling and digital twin models, and machine learning and risk assessment algorithms.

Computer vision for automated analysis of cells and tissues usually include extracting features from images before analyzing such features via various machine learning and machine vision algorithms. The purpose of this work is to explore and demonstrate the ability of a Convolutional Neural Network (CNN) to classify cells pictured via brightfield microscopy without the need of any feature extraction, using a minimum of images, improving work-flows that involve cancer cell identification.

The methodology involved a quantitative measure of the performance of a Convolutional Neural Network in distinguishing between two cancer lines. In their approach, they trained, validated and tested their 6-layer CNN on 1,241 images of MDA-MB-468 and MCF7 breast cancer cell line in an end-to-end fashion, allowing the system to distinguish between the two different cancer cell types.

They obtained a 99% accuracy, providing a foundation for more comprehensive systems.

Value can be found in that systems based on this design can be used to assist cell identification in a variety of contexts, whereas a practical implication can be found that these systems can be deployed to assist biomedical workflows quickly and at low cost. In conclusion, this system demonstrates the potentials of end-to-end learning systems for faster and more accurate automated cell analysis.