Search results

Governments around the world instituted guidelines for calculating energy efficiency of vehicles not only by models, but by the whole universe of new vehicles registered. This paper compiles Multi-criteria decision-making (MCDM) studies related to automotive industry. We applied a Systematic Literature Review on MCDM studies published until 2015 to identify patterns on MCDM applications to design vehicles more fuel efficient in order to achieve full compliance with energy efficiency guidelines (e.g., Inovar-Auto). From 339 papers, 45 papers have been identified as describing some MCDM technique and correlation to automotive industry. We classified the most common MCDM technique and application in the automotive industry. Integrated approaches were more usual than individual ones. Application of fuzzy methods to tackle uncertainties in the data was also observed. Despite the maturity in the use of MCDM in several areas of knowledge, and intensive use in the automotive industry, none of them are directly linked to car design for energy efficiency. Analytic Hierarchy Process was identified as the common technique applied in the automotive industry.

This paper aims to explore the role and meaning of openness for the purpose of enhancing the understanding of collaborative innovation from an industrial network perspective.

The theoretical framework is based on the Industrial Network Approach, and the concepts of activity links, resource ties and actor bonds are used as a starting point for capturing the content and dynamics of the interaction. The empirical part consists of five case studies: two historical and three contemporary cases dealing with collaborative innovation projects. The cases are analyzed with regard to openness in business relationships and their connections in the network.

The main contribution is a conceptualization of openness in business relationships and relationship connections. The paper describes various forms and contents of openness – and closeness. It is postulated that the concept of openness can be used as an analytical tool for digging deeper into relationship and network-related issues of relevance to firms’ behavior in the context of collaborative innovation. Openness, as it is defined in this paper, is also put forward as an explanation of why (or why not) collaborative innovation projects become successful.

The conceptualization of openness differs from openness as it is commonly described in the open innovation literature. There, openness is the opposite of closeness, that is, a pattern where the innovation activities take place internally within the company. In this paper, openness, instead, has to do with how firms interact with other network actors in the context of collaborative innovation.

Global value changes continued to expand until the late 2000s. On the other hand, regional value chains have formed around major regional hubs due to the expansion of domestic demand in emerging economies, such as China, and strengthened trade protectionism since the global financial crisis. Such changes lead to the reorganisation of value chains, focusing on domestic markets (reshoring) or neighbouring countries (nearshoring). In particular, the importance of supply chain risk management has been highlighted following disruptions to the supply network due to the COVID-19 outbreak in December 2019. In this regard, major countries such as the USA and the EU are rapidly shifting to regional value chains for stable and sustainable production, rather than primarily aiming for production efficiency targeted at reducing costs. Industries in particular are more exposed to such supply chain risks under the existing structure and it now has become extremely important for businesses to take reaction to such risks. This is especially important for major industries in a country such as automobile or semiconductor manufacturing industries in South Korea. The aim of this study, therefore, is to establish the basis for the simultaneous growth of ports and linked industries by examining the existing structure of the global value chain for the automotive industry, which has a strong presence in South Korea’s domestic economy. In this regard, this research carries out a supply chain analysis focusing on the imports and exports of automotive parts. It also analyses the current structural risks and suggests risk management measures to secure a stable supply chain.

This paper aims at understanding how automotive firms integrate customer relationship management (CRM) tools and big data analytics (BDA) into their marketing strategies to enhance total quality management (TQM) after the coronavirus disease (COVID-19).

A qualitative methodology based on a multiple-case study was adopted, involving the collection of 18 interviews with eight leading automotive firms and other companies responsible for their marketing and CRM activities.

Results highlight that, through the adoption of CRM technology, automotive firms have developed best practices that positively impact business performance and TQM, thereby strengthening their digital culture. The challenges in the implementation of CRM and BDA are also discussed.

The study suffers from limitations related to the findings' generalizability due to the restricted number of firms operating in a single industry involved in the sample.

Findings suggest new relational approaches and opportunities for automotive companies deriving from the use of CRM and BDA under an overall customer-oriented approach.

This research analyzes how CRM and BDA improve the marketing and TQM processes in the automotive industry, which is undergoing deep transformation in the current context of digital transformation.

This paper aims to study the automotive 4.0 context to understand the consumers’ propensity towards high-tech automated cars. The paper analyses the antecedents that lead to the use of innovative vehicles. Theory of planned behaviour (TPB) is adopted and extended by including further constructs, such as environmental aspects and inhibitors.

The advent of smart technologies and the internet of things has given rise to several contributions that look at consumers’ intention towards innovation adoption in the automotive industry. Furthermore, this study rises from the growing interest that sustainable mobility achieved. Based on the previous technology acceptance models and particularly TPB, this paper develops a structured questionnaire. After a pilot survey, the final questionnaire was administered online through email and social media in the Italian context. Structural equation modelling technique has been used for analysing data and testing the conceptual model.

The number of questionnaires filled out was 310, with a sample composed of young adults, characterised by different addiction levels towards technology. The results explain the drivers that lead to accept and adopt high-tech automated vehicles. This topic is still under investigation and offers potential research opportunities, considering the evolution of the market and the consumers’ habits and needs. Future research studies in this area should focus on generalising the present findings in other countries. Moreover, once this technology starts to be adopted, other constructs could be discovered, investigated and included in the model.

Mobility has raised a growing interest with the fast increasing demand for sustainability and growth of innovative solutions embedded in mobility. This research explores the TPB model’s application and the relation between its constructs, environmental aspects, inhibitors and intention to adopt automated vehicles. On this strength, it is possible to identify each construct’s relevance for obtaining social consensus on the market.

The different performance tests were conducted on diesel engine compression ignition (CI) mode and CRDi engine.

The CI engine was suitably modified to CRDi engine with Toroidal re-entrant combustion chamber (TRCC) and was run in dual-fuel (DF) mode. Hydrogen (H₂) was supplied at different flow rates during the suction stroke, and 0.22 Kg/h of hydrogen fuel flow rate (HFFR) was found to be optimum. Diesel and biodiesel were used as pilot fuels. The CRDi engine with DF mode was run at various injection pressures, and 900 bar was found to be optimum injection pressure (IP) with 10o before top dead center (bTDC) as fuel injection timing (IT).

These operating engine conditions increased formation of oxides of nitrogen (NOx), which were reduced by exhaust gas recycle (EGR). With EGR of 15%, CRDi engine resulted in 12.6% lower brake thermal efficiency (BTE), 5.5% lower hydrocarbon (HC), 7.7% lower carbon monoxide (CO), 26% lower NOx at 80% load as compared to the unmodified diesel engine (CI mode).

The current research is an effort to study and evaluate the performance of CRDi engine in DF mode with diesel-H₂ and BCPO-H₂ fuel combinations with TRCC.

The purpose of this paper is to investigate how technology-forcing regulations affect the product development process in the supply chain of heavyweight vehicles.

Through a case study, this paper seeks to understand how one of the leading companies in heavyweight vehicles manufacturing industry and its engine supplier in Brazil introduce eco-design practices into its engine development process.

Through case studies conducted in a heavyweight vehicle producer and its engine supplier, this study shows that, in addition to meeting the standards and legislation, the automaker uses ecodesign practices during the product development cycle such as a design that eliminates harmful and hazardous materials and a project that allows recycling, the reuse of parts and energy efficiency, thereby reducing the environmental impact. However, without the mandatory requirements imposed by federal legislation, products with lower environmental impacts would rarely be developed, as environmental performance is not demanded by customers, who are mainly cost driven. Technology-forcing regulations play an important role in enhancing the adoption of ecodesign practices, but market and competitive conditions also play an important role.

Several studies on the impacts of public policies and development for the automobile sector have been conducted, but there is a lack of studies in the area of commercial vehicles, especially in Brazil. Therefore, this research is justified by new demands of society, in addition to the necessity of complying with legal requirements and the adoption of good practices related to eco-design.

This paper aims to provide an overview of the current manufacturing methods for three-dimensional textile preforms while providing experimental data on the emerging techniques of combining yarn interlocking with yarn interlooping.

The paper describes the key textile technologies used for composite manufacture: braiding, weaving and knitting. The various textile preforming methods are suited to different applications; their capabilities and end performance characteristics are analysed.

Such preforms are used in composites in a wide range of industries, from aerospace to medical and automotive to civil engineering. The paper highlights how the use of knitting technology for preform manufacture has gained wider acceptance due to its flexibility in design and shaping capabilities. The tensile properties of glass fibre knit structures containing inlay yarns interlocked between knitted loops are given, highlighting the importance of reinforcement yarns.

The future trends of reinforcement yarns in knitted structures for improved tensile properties are discussed, with initial experimental data.

The purpose of this paper is to investigate empirically how information and communication technologies (ICT) can contribute to reduction of CO₂ emissions in road freight transport and to identify opportunities for further improvements.

This research adopts a multiple case study approach with three leading UK grocery retailers as exemplars of fast-moving consumer goods retailers, conducted using multiple data collection techniques including interviews, system demonstrations, onsite observations and the use of archive information.

ICT solutions have a direct positive impact on CO₂ emissions reduction but opportunities to further reduce CO₂ emissions are perceived as lying beyond retailers’ own distribution networks. These opportunities are not fully utilised due to the complexities of collaborative ICT provisions and retailers’ reluctance to share information with competitors.

A limitation of the study is that it is exploratory and only three cases were examined. Even though these three retailers represent over 60 per cent of the UK grocery retail sector, other retailers may deploy significantly different ICT applications.

The research provides an overarching insight for businesses on how to leverage the existing and emerging information technologies for environmental and economic benefits.

While sustainability issues have received increasing attention recently, the role of ICT in freight transport for CO₂ emissions reduction has not been investigated in depth and its impact is largely unknown. This research advances understanding about how ICT contributes CO₂ emissions reductions and provides a framework for further investigation.

This paper aims to present the main results achieved in the frame of the TIVANO national-funded project which may anticipate, in a stepped approach, the evolution and the design of the enabling technologies needed for a hybrid/electric medium altitude long endurance (MALE) unmanned aerial vehicle (UAV) to perform persistent intelligence surveillance reconnaissance (ISR) military operations.

Different architectures of hybrid-propulsion system are analyzed pointing out their operating modes to select the more suitable architecture for the reference aircraft. The selected architecture is further analyzed together with its electric power plant branch focusing on electric system architecture and the selected electric machine. A final comparison between the hybrid and standard propulsion is given at aircraft level.

The use of hybrid propulsion may lead to a reduction of the total aircraft mass and an increase in safety level. However, this result comes together with a reduced performance in climb phase.

This study can be used as a reference for similar studies and it provides a detailed description of propulsion operating modes, power management, electric system and machine architecture.

This study presents a novel application of hybrid propulsion focusing on a three tons class MALE UAV for ISR missions. It provides new operating modes of the propulsion system and a detailed electric architecture of its powertrain branch and machine. Some considerations on noise emissions and infra-red traceability of this propulsion, at aircraft level.