Search results
1 – 10 of 16Serena Summa, Alex Mircoli, Domenico Potena, Giulia Ulpiani, Claudia Diamantini and Costanzo Di Perna
Nearly 75% of EU buildings are not energy-efficient enough to meet the international climate goals, which triggers the need to develop sustainable construction techniques with…
Abstract
Purpose
Nearly 75% of EU buildings are not energy-efficient enough to meet the international climate goals, which triggers the need to develop sustainable construction techniques with high degree of resilience against climate change. In this context, a promising construction technique is represented by ventilated façades (VFs). This paper aims to propose three different VFs and the authors define a novel machine learning-based approach to evaluate and predict their energy performance under different boundary conditions, without the need for expensive on-site experimentations
Design/methodology/approach
The approach is based on the use of machine learning algorithms for the evaluation of different VF configurations and allows for the prediction of the temperatures in the cavities and of the heat fluxes. The authors trained different regression algorithms and obtained low prediction errors, in particular for temperatures. The authors used such models to simulate the thermo-physical behavior of the VFs and determined the most energy-efficient design variant.
Findings
The authors found that regression trees allow for an accurate simulation of the thermal behavior of VFs. The authors also studied feature weights to determine the most relevant thermo-physical parameters. Finally, the authors determined the best design variant and the optimal air velocity in the cavity.
Originality/value
This study is unique in four main aspects: the thermo-dynamic analysis is performed under different thermal masses, positions of the cavity and geometries; the VFs are mated with a controlled ventilation system, used to parameterize the thermodynamic behavior under stepwise variations of the air inflow; temperatures and heat fluxes are predicted through machine learning models; the best configuration is determined through simulations, with no onerous in situ experimentations needed.
Details
Keywords
Mohamed M. Hendy and Magdy A. Ezzat
Whereas, the classical Green-Naghdi Type II (GN-II) model struggles to accurately represent the thermo-mechanical behavior of thermoelectric MHD due to its inability to account…
Abstract
Purpose
Whereas, the classical Green-Naghdi Type II (GN-II) model struggles to accurately represent the thermo-mechanical behavior of thermoelectric MHD due to its inability to account for the memory effect. A new mathematical model of the GN-II theory incorporates a fractional order of heat transport to address this issue.
Design/methodology/approach
The employment of the matrix exponential method, which forms the basis of the state-space approach in contemporary theory, is central to this strategy. The resulting formulation, together with the Laplace transform techniques, is applied to a variety of problems. Solutions to a thermal shock problem and to a problem of a layer media both without heat sources are obtained. Also, a problem with the distribution of heat sources is considered. The numerical technique is used to achieve the Laplace transform inversion.
Findings
According to the numerical results and its graphs, the influences of the fractional order parameters, figure-of-merit factor, thermoelectric power and Peltier coefficient on the behavior of the field quantities are investigated in the new theory.
Originality/value
The new modeling of thermoelectric MHD has advanced significantly as a result of this work, providing a more thorough and precise tool for forecasting the behavior of these materials under a range of thermal and magnetic conditions.
Details
Keywords
Ankita Bisht and Sanjalee Maheshwari
The purpose of this article is to present a mathematical model for the fully developed flow of Bi-viscous Bingham nanofluid through a uniform-width anisotropic porous channel. The…
Abstract
Purpose
The purpose of this article is to present a mathematical model for the fully developed flow of Bi-viscous Bingham nanofluid through a uniform-width anisotropic porous channel. The model incorporates a generalized Brinkman-Darcy formulation for the porous layers while considering the motion of nanoparticles influenced by both Brownian diffusion and thermophoresis effects.
Design/methodology/approach
The similarity transformations derived through Lie group analysis are used to reduce the system from nonlinear partial differential equations to nonlinear ordinary differential equations. The finite difference method-based numerical routine bvp4c is employed to collect and graphically present the outcomes for velocity, temperature, and nanoparticle concentration profiles. The flow pattern is analyzed through streamlined plots. Furthermore, skin friction, heat, and mass transmission rates are investigated and presented via line plots.
Findings
It is observed that in anisotropic porous media, the temperature profile is stronger than in isotropic porous media. The thermal anisotropic parameter enhances the concentration profile while reducing the temperature.
Practical implications
Anisotropy arises in various industrial and natural systems due to factors such as preferred orientation or asymmetric geometry of fibers or grains. Hence, this study has applications in oil extraction processes, certain fibrous and biological materials, geological formations, and dendritic zones formed during the solidification of binary alloys.
Originality/value
1. The permeability and thermal conductivity are not constant; instead, they have different values in the x and y directions. 2. This study considers the dependency of thermophoresis on nanoparticle volume fraction and Brownian diffusion on the temperature in both the fluid flow equations and boundary conditions. 3. A novel similarity transformation is derived using Lie group analysis instead of using an existing transformation already available in the literature.
Details
Keywords
Luca Pugi, Giulio Rosano, Riccardo Viviani, Leonardo Cabrucci and Luca Bocciolini
The purpose of this work is to optimize the monitoring of vibrations on dynamometric test rigs for railway brakes. This is a quite demanding application considering the continuous…
Abstract
Purpose
The purpose of this work is to optimize the monitoring of vibrations on dynamometric test rigs for railway brakes. This is a quite demanding application considering the continuous increase of performances of high-speed trains that involve higher testing specifications for brake pads and disks.
Design/methodology/approach
In this work, authors propose a mixed approach in which relatively simple finite element models are used to support the optimization of a diagnostic system that is used to monitor vibration levels and rotor-dynamical behavior of the machine. The model is calibrated with experimental data recorded on the same rig that must be identified and monitored. The whole process is optimized to not interfere with normal operations of the rig, using common inertial sensor and tools and are available as standard instrumentation for this kind of applications. So at the end all the calibration activities can be performed normally without interrupting the activities of the rig introducing additional costs due to system unavailability.
Findings
Proposed approach was able to identify in a very simple and fast way the vibrational behavior of the investigated rig, also giving precious information concerning the anisotropic behavior of supports and their damping. All these data are quite difficult to be found in technical literature because they are quite sensitive to assembly tolerances and to many other factors. Dynamometric test rigs are an important application widely diffused for both road and rail vehicles. Also proposed procedure can be easily extended and generalized to a wide value of machine with horizontal rotors.
Originality/value
Most of the studies in literature are referred to electrical motors or turbomachines operating with relatively slow transients and constant inertial properties. For investigated machines both these conditions are not verified, making the proposed application quite unusual and original with respect to current application. At the same time, there is a wide variety of special machines that are usually marginally covered by standard testing methodologies to which the proposed approach can be successfully extended.
Details
Keywords
The extreme nature of fire makes structural fire engineering unique in that the load actions dictating design are intense and neither geographically nor seasonally bound. Simply…
Abstract
Purpose
The extreme nature of fire makes structural fire engineering unique in that the load actions dictating design are intense and neither geographically nor seasonally bound. Simply, fire can break out anywhere, at any time and for any number of reasons. Despite the apparent need, the fire design of structures still relies on expensive fire tests, complex finite element simulations and outdated procedures with little room for innovation. This paper aims to discuss the aforementioned issues.
Design/methodology/approach
This primer highlights the latest state of the art in this area with regard to performance-based design in fire structural engineering. In addition, this short review also presents a series of examples of successful implementation of performance-based fire design of structures from around the world.
Findings
A comparison between global efforts clearly shows the advances put forth by European and Oceanian efforts as opposed to the rest of the world. In addition, it can be clearly seen that most performance-based fire designs are related to steel and composite structures.
Originality/value
In one study, this paper presents a concise and global view to performance-based fire design of structures from success stories from around the world.
Details
Keywords
Cheng Xiong, Bo Xu and Zhenqian Chen
This study aims to investigate the rarefaction effects on flow and thermal performances of an equivalent sand-grain roughness model for aerodynamic thrust bearing.
Abstract
Purpose
This study aims to investigate the rarefaction effects on flow and thermal performances of an equivalent sand-grain roughness model for aerodynamic thrust bearing.
Design/methodology/approach
In this study, a model of gas lubrication thrust bearing was established by modifying the wall roughness and considering rarefaction effect. The flow and lubrication characteristics of gas film were discussed based on the equivalent sand roughness model and rarefaction effect.
Findings
The boundary slip and the surface roughness effect lead to a decrease in gas film pressure and temperature, with a maximum decrease of 39.2% and 8.4%, respectively. The vortex effect present in the gas film is closely linked to the gas film’s pressure. Slip flow decreases the vortex effect, and an increase in roughness results in the development of slip flow. The increase of roughness leads to a decrease for the static and thermal characteristics.
Originality/value
This work uses the rarefaction effect and the equivalent sand roughness model to investigate the lubrication characteristics of gas thrust bearing. The results help to guide the selection of the surface roughness of rotor and bearing, so as to fully control the rarefaction effect and make use of it.
Details
Keywords
Shimpy Shimpy, Mahesh Kumar and Anil Kumar
Food loss and wastage is an issue of global concern and the household sector is one of the biggest contributors to this. Solar drying has been explored by many eminent researchers…
Abstract
Purpose
Food loss and wastage is an issue of global concern and the household sector is one of the biggest contributors to this. Solar drying has been explored by many eminent researchers as a solution to this problem but there have been concerns about the lack in designs, higher cost, lower performance, and consumer acceptability. The present research aims to design a small-scale domestic solar dryer by using computer software.
Design/methodology/approach
Response surface methodology (RSM) and computational fluid dynamics (CFD) are used to design the domestic solar dryer. Initially, design variables (inlet and outlet vent height) are identified and a design of experiments has been created using RSM for set of experimental runs. The experimental runs suggested by RSM were carried out using CFD simulation in COMSOL Multiphysics software and the results were used for optimization of response variables (outlet velocity and drying chamber temperature) in RSM.
Findings
Outlet vent height was found to be most significantly affecting parameter to both the responses. The optimum values of inlet and outlet vent heights were 0.5 and 2.5 cm, respectively with the overall desirability of 0.728. The model accuracy was tested by conducting a confirmation test as post processing in design expert software.
Originality/value
Designing a solar dryer is a complex, costly and time consuming process, this study presents an easy, economic and fast method to design a new solar dryer. It would help researchers to design and develop new domestic as well as large size industrial solar dryer.
Details
Keywords
Chinedu Chinakwe, Adekunle Adelaja, Michael Akinseloyin and Olabode Thomas Olakoyejo
Inclination angle has been reported to have an enhancing effect on the thermal-hydraulic characteristics and entropy of some thermal systems. Therefore, this paper aims to…
Abstract
Purpose
Inclination angle has been reported to have an enhancing effect on the thermal-hydraulic characteristics and entropy of some thermal systems. Therefore, this paper aims to numerically investigate the effects of inclination angle, volume concentration and Reynolds number on the thermal and hydraulic characteristics and entropy generation rates of water-based Al2O3 nanofluids through a smooth circular aluminum pipe in a turbulent flow.
Design/methodology/approach
A constant heat flux of 2,000 Watts is applied to the circular surface of the tube. Reynolds number is varied between 4,000 and 20,000 for different volume concentrations of alumina nanoparticles of 0.5%, 1.0% and 2.0% for tube inclination angles of ±90o, ±60o, ±45o, ±30o and 0o, respectively. The simulation is performed in an ANSYS Fluent environment using the realizable kinetic energy–epsilon turbulent model.
Findings
Results show that +45o tube orientation possesses the largest thermal deviations of 0.006% for 0.5% and 1.0% vol. concentrations for Reynolds numbers 4,000 and 12,000. −45o gives a maximum pressure deviation of −0.06% for the same condition. The heat transfer coefficient and pressure drop give maximum deviations of −0.35% and −0.39%, respectively, for 2.0% vol. concentration for Reynolds number of 20,000 and angle ±90o. A 95%–99.8% and 95%–98% increase in the heat transfer and total entropy generation rates, respectively, is observed for 2.0% volume concentration as tube orientation changes from the horizontal position upward or downward.
Originality/value
Research investigating the effect of inclination angle on thermal-hydraulic performance and entropy generation rates in-tube turbulent flow of nanofluid is very scarce in the literature.
Details
Keywords
Ting Li, Junmiao Wu, Junhai Wang, Yunwu Yu, Xinran Li, Xiaoyi Wei and Lixiu Zhang
The purpose of this article is to prepare graphene/polyimide composite materials for use as bearing cage materials, improving the friction and wear performance of bearing cages.
Abstract
Purpose
The purpose of this article is to prepare graphene/polyimide composite materials for use as bearing cage materials, improving the friction and wear performance of bearing cages.
Design/methodology/approach
The oil absorption and discharge tests were conducted to evaluate the oil content properties of the materials, while the mechanical properties were analyzed through cross-sectional morphology examination. Investigation into the tribological behavior and wear mechanisms encompassed characterization and analysis of wear trace morphology in PPI-based materials. Consequently, the influence of varied graphene nanoplatelets (GN) concentrations on the oil content, mechanical and tribological properties of PPI-based materials was elucidated.
Findings
The composites exhibit excellent oil-containing properties due to the increased porosity of PPI-GN composites. The robust formation of covalent bonds between GN and PPI amplifies the adhesive potency of the PPI-GN composites, thereby inducing a substantial enhancement in impact strength. Notably, the PPI-GN composites showed enhanced lubrication properties compared to PPI, which was particularly evident at a GN content of 0.5 Wt.%, as evidenced by the minimization of the average coefficient of friction and the width of the abrasion marks.
Practical implications
This paper includes implications for elucidating the wear mechanism of the polyimide composites under frictional wear conditions and then to guide the optimization of oil content and tribological properties of polyimide bearing cage materials.
Originality/value
In this paper, homogeneously dispersed PPI-GN composites were effectively synthesized by introducing GN into a polyimide matrix through in situ polymerization, and the lubrication mechanism of the PPI composites was compared with that of the PPI-GN composites to illustrate the composites’ superiority.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0415
Details
Keywords
Maosheng Wen, En Zhu Hu, Xingpeng Fei and Kunhong Hu
This paper aims to use an ionic liquid (IL, [HMIM]PF6) to improve the lubrication performance of liquid metal (LM) as a lithium grease additive and to expand the application range…
Abstract
Purpose
This paper aims to use an ionic liquid (IL, [HMIM]PF6) to improve the lubrication performance of liquid metal (LM) as a lithium grease additive and to expand the application range of LM.
Design/methodology/approach
In this paper, the different mass ratios of [HMIM]PF6/LM mixtures were added into the lithium grease on a four-ball tribo-meter to investigate the effects of its tribological behavior. Scanning electron mircoscope/energy dispersive spectroscopy and X-ray photoelectron spectroscopy were used to reveal the anti-wear and friction-reducing mechanism of the additives.
Findings
When the load was used at 461 N, the average coefficient of friction (ACOF) and average wear scar diameter (AWSD) of steel ball Lubricated with grease with an optimal ratio of 2:3 ([HMIM]PF6/LM) were reduced by 32.8% and 30.5%, respectively. Friction and wear mechanisms are ascribed to friction-induced additive components that can simultaneously form a composite lubrication film consisting of FePO4, FeF3, Ga2O3, In2O3 and SnO2.
Research limitations/implications
Compared with the pure lithium-based grease, when [HMIM]PF6/LM was added with an optimal ratio of 2:3, the ACOF and AWSD were reduced by 12.4% from 0.097 to 0.085 and 23.8% from 552.117 µm to 420.590 µm under 392 N, respectively. When at 461 N, the ACOF and AWSD of steel ball were reduced by 32.8% from 0.122 to 0.082 and 30.5% from 715.714 µm to 497.472 µm, respectively. It was shown that the simultaneous addition of LM and [HMIM]PF6 can form a composite lubrication film consisting of FePO4, FeF3, Ga2O3, In2O3 and SnO2.
Originality/value
In this paper, [HMIM]P F6 is added with LM simultaneously to improve the lubrication properties of lithium grease, and expand the application scope of LM.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2024-0017/
Details