Search results

In response to growing concerns over the negative consequences of Internet addiction on adolescents’ mental health, coupled with conflicting results in this literature stream, this meta-analysis sought to (1) examine the association between Internet addiction and depressive symptoms in adolescents, (2) examine the moderating role of Internet freedom across countries, and (3) examine the mediating role of excessive daytime sleepiness.

In total, 52 studies were analyzed using robust variance estimation and meta-analytic structural equation modeling.

There was a significant and moderate association between Internet addiction and depressive symptoms. Furthermore, Internet freedom did not explain heterogeneity in this literature stream before and after controlling for study quality and the percentage of female participants. In support of the displacement hypothesis, this study found that Internet addiction contributes to depressive symptoms through excessive daytime sleepiness (proportion mediated = 17.48%). As the evidence suggests, excessive daytime sleepiness displaces a host of activities beneficial for maintaining mental health. The results were subjected to a battery of robustness checks and the conclusions remain unchanged.

The results underscore the negative consequences of Internet addiction in adolescents. Addressing this issue would involve interventions that promote sleep hygiene and greater offline engagement with peers to alleviate depressive symptoms.

This study utilizes robust meta-analytic techniques to provide the most comprehensive examination of the association between Internet addiction and depressive symptoms in adolescents. The implications intersect with the shared interests of social scientists, health practitioners, and policy makers.

This systematic literature review aims to identify the pattern of data mining (DM) research by looking at the levels and aspects of education.

This paper reviews 113 conference and research papers from well-known publishers of educational data mining (EDM) and learning analytics-related research using a recognized literature review in computer science by Carrera-Rivera et al. (2022a). Two major stages, planning and conducting the review, were used. The databases of Elsevier, Springer, IEEE, SAI, Hindawi, MDPI, Wiley, Emerald and Sage were searched to retrieve EDM papers from the period 2017 to 2023. The papers retrieved were then filtered based on the application of DM to the three educational levels – basic, pre-tertiary and tertiary education.

EDM is concentrated on higher education. Basic education is not given the needed attention in EDM. This does not enhance inclusivity and equity. Learner performance is given much attention. Resource availability and teaching and learning are not given the needed attention.

This review is limited to only EDM. Literature from the year 2017 to 2023 is covered. Other aspects of DM and other relevant literature published in EDM outside the research period are not considered.

As the current trend of EDM shows an increase in zeal, future research in EDM should concentrate on the lower levels of education to identify the challenges of basic education which serves as the core of education. This will enable addressing the challenges of education at an early stage and facilitate getting a quality education at all levels of education. Appropriate EDM techniques for mining the data at this level should be the focus of the research. Specifically, techniques that can cater for the variation in learner abilities and the appropriate identification of learner needs should be considered.

Content sequencing is necessary in facilitating an easy understanding of concepts. Curriculum design from basic to higher education dwells much on this. Identifying the challenge of learning at the early stages will facilitate efficient learning. At the basic level of learning, data on learning should be collected by educational institutions just as it is done at the tertiary level. This will enable EDM to accurately identify the challenges and appropriate solutions to educational problems. Resource availability is a catalyst for effective teaching and learning. The attributes of a learner will enable knowing the true nature of the learner to determine the prospects of the learner.

This research has not been published in any journal. The information presented is the original knowledge of the authors. However, a pre-print of the work is in Research Square.

Social commerce (s-commerce) offers community-based platforms that facilitate customer-to-customer interactions and the development of customers' social shopping-based experience. While prior research has addressed the role of customer engagement (CE) in boosting s-commerce-based sales and performance, insight into the effect of s-commerce attributes on CE remains tenuous. Addressing this gap, this study examines the role of specific s-commerce attributes (i.e. community, collaboration, interactivity and social dynamics) on CE, which is, in turn, proposed to impact customers' repurchase- and electronic word of mouth (eWOM) intention.

A web-based survey was deployed to target users of a popular s-commerce platform, Etsy.com. Partial least squares structural equation modeling (PLS-SEM) was, then, used to analyze the survey data collected from 390 users.

The results reveal that the four examined attributes positively affect CE. The findings also demonstrate CE's positive effect on customers' repurchase- and eWOM intention.

Though CE has been identified as a key s-commerce performance indicator, little remains known about the role of specific s-commerce attributes in driving CE, as, therefore, explored in this research. Specifically, the authors examine the role of s-commerce-based community, collaboration, interactivity and social dynamics on CE. Their analyses also corroborate that CE, in turn, drives customers' post-purchase (i.e. repurchase/eWOM) intention. Managerially, our findings can be used to develop more engaging s-commerce platforms.

In view of the significance of intangible organizational resources and firm sustainability, this study investigates the mediating role of ambidextrous green innovation and the moderating effects of resource orchestration capability in the relationship between green entrepreneurial orientation and green performance.

The research employed a quantitative analysis technique using hierarchical linear regression and a moderated mediation approach on a sample of 409 managers from UAE manufacturing firms to investigate the proposed relationships among the variables.

The research results show that a firm’s green performance is influenced by its green entrepreneurial orientation. Green innovation, both exploratory and exploitative, mediates the link between green entrepreneurial orientation and green performance. Moreover, the association between green entrepreneurial orientation and exploitative green innovation, as well as between exploitative green innovation and a firm's green performance, is strengthened by resource orchestration capability. The findings of the moderated mediation show that when resource orchestration capacity is high, exploitative green innovation has a greater mediating effect on green entrepreneurial orientation and green performance.

This study provides valuable insights for manufacturing firms to achieve sustainable performance and reduce their environmental impact. Firms should adopt proactive environmental strategies and innovative approaches to achieve sustainable green performance by adopting green entrepreneurship and establishing ambidextrous green innovation.

This study contributes to the literature on GEO, ambidextrous green innovation, resource orchestration capability, and green performance. These results provide insight into fostering green innovation in the manufacturing industry, deepen the theoretical foundation for green entrepreneurship, and advance the field of green entrepreneurship study.

The purpose of this study is to examine how the interplay of stressor (e.g. fear of missing out, FoMO) and strains (e.g. perceived social overload, communication overload, information overload and system feature overload) in social networking sites (SNS) use can contribute to users’ SNS fatigue from a configurational view.

Data were collected among 363 SNS users in China via an online survey, and fuzzy-set qualitative comparative analysis (fsQCA) was applied in this study to scrutinize the different combinations of FoMO and overload that contribute to the same outcome of SNS fatigue.

Six combinations of casual conditions were identified to underlie SNS fatigue. The results showed that FoMO, perceived information overload and system feature overload are the core conditions that contribute to SNS fatigue when combined with other types of overloads.

The current work supplements the research findings on SNS fatigue by identifying the configurations contributing to SNS fatigue from the joint effects of stressor (FoMO) and strain (perceived social overload, communication overload, information overload and system feature overload) and by providing explanations for SNS fatigue from the configurational perspective.

The aim of this study is to assess the mediating effect of source appearance (SA) and self-influencer congruence (SIC) on the relationship between visual content (VC) and customer engagement (CE) towards mobile advertisement.

This study uses a quantitative approach to test the proposed model based on the stimulus–organism–response (SOR) theory. The non-probability purposive sampling technique was used to collect data from Pakistani mobile users through a self-administered questionnaire.

The study results prove that VC alone cannot generate mobile users’ engagement. SA is the key in this regard, which has a relatively higher importance compared to SIC. Furthermore, the serial mediation effect of SA and SIC on CE shows that attractive sources are likely to induce higher SIC and subsequent CE.

The results reveal that without a pleasing SA and positive SIC, mobile users skip the ads by perceiving them to be irritating or interruptive. Mobile ads might cost relatively less, but the advertisers should understand the significance of the SA toward minimizing the mobile advertising skepticism.

Advertisers can enhance the user’s engagement on mobile devices by addressing both the SA and SIC in their VC. The combined effect of both the SA and SIC on CE has not been assessed before. Furthermore, this study has used the SOR mechanism to examine CE.

El objetivo general de esta investigación es evaluar el efecto mediador de la apariencia de la fuente (SA) y la congruencia del auto-influencer (SIC) en la relación entre el contenido visual (CV) y el compromiso del cliente (CE) hacia la publicidad móvil.

Este estudio utiliza un enfoque cuantitativo para probar el modelo propuesto basado en la teoría estímulo-organismo-respuesta (SOR). Se utilizó la técnica de muestreo intencional no probabilístico para recoger datos de usuarios de móviles paquistaníes mediante un cuestionario autoadministrado.

Nuestros resultados demuestran que el contenido visual por sí solo no puede generar el compromiso de los usuarios de móviles. La apariencia de la fuente es la clave a este respecto, que tiene una importancia relativamente mayor en comparación con la congruencia del auto-influencer. Además, el efecto de mediación en serie de SA y SIC en CE muestra que es probable que las fuentes atractivas induzcan un mayor SIC y el consiguiente compromiso del cliente.

Los resultados revelan que sin una SA agradable y una SIC positiva, los usuarios de móviles omiten los anuncios al percibirlos como irritantes o interruptores. Los anuncios para móviles pueden costar relativamente menos, pero los anunciantes deben comprender la importancia de la apariencia de la fuente para minimizar el escepticismo de la publicidad móvil.

Los anunciantes pueden mejorar la participación del usuario en los dispositivos móviles abordando tanto la AS como el SIC en sus contenidos visuales. Hasta ahora no se había evaluado el efecto combinado de la AS y el SIC en el CE. Además, este estudio ha utilizado el mecanismo del SOR para examinar el engagement del cliente.

本研究的总体目标是评估源外观（SA）和自我影响者一致性（SIC）对移动广告视觉内容（VC）和客户参与（CE）之间关系的中介效应。

本研究采用定量方法来检验基于刺激-有机体-反应（SOR）理论提出的模型。研究采用了非概率目的性抽样技术, 通过自填问卷的方式向巴基斯坦移动用户收集数据。

我们的研究结果证明, 仅靠视觉内容并不能引起移动用户的参与。在这方面, 源外观是关键, 与自我影响者一致性相比, 源外观的重要性相对更高。此外, SA 和 SIC 对 CE 的串联中介效应表明, 有吸引力的信息源可能会诱发更高的 SIC 和随后的客户参与。

研究结果表明, 如果没有令人愉悦的SA和积极的SIC, 移动用户就会认为广告具有刺激性或干扰性, 从而跳过广告。移动广告的成本可能相对较低, 但广告商应了解广告源外观对减少移动广告怀疑的重要性。

广告商可以通过在视觉内容中同时考虑广告联盟和广告投放中心这两个因素, 提高用户在移动设备上的参与度。之前从未有人评估过 “SA “和 “SIC “对消费者参与度的综合影响。此外, 本研究还使用了 SOR 机制来考察客户参与度。

This study aims to investigate the impact of service quality (SQ), perceived value (PV) and consumer satisfaction on Thai street food, with customer satisfaction (CS) as a mediator for customer loyalty and repurchase intention (RI). It also explores how consumer trust (CT) in Thai street food safety moderates these relationships.

Structural equation modelling (SEM) was utilised to analyse the complex interrelationships between various constructs. Multi-group analyses were conducted to investigate the moderating effects of CT on the structural model, considering two distinct groups based on trust levels: low and high.

The findings revealed that SQ and PV significantly influenced CS and behavioural intention, while the perceived quality of Thai street food had no significant impact on post-COVID-19 consumer satisfaction. The study highlighted the critical role of CT in moderating the relationships between SQ, PV and CS, with distinct effects observed in groups with varying trust levels.

The research emphasises the importance of enhancing SQ and delivering value to customers in the context of Thai street food, which can contribute to increased CS, RI and positive word-of-mouth. Furthermore, the study underscores the critical role of building CT in fostering enduring customer relationships and promoting consumer satisfaction and loyalty.

This research offers valuable insights into consumer behaviour and decision-making processes, particularly within the realm of Thai street food. It underscores the significance of understanding and nurturing CT, especially in the post-COVID-19 landscape, emphasising the need for effective business strategies and consumer engagement.

The “chiralisation” of Euclidean polygonal tessellations is a novel, recent method which has been used to design new auxetic metamaterials with complex topologies and improved geometric versatility over traditional chiral honeycombs. This paper aims to design and manufacture chiral honeycombs representative of four distinct classes of 2D Euclidean tessellations with hexagonal rotational symmetry using fused-deposition additive manufacturing and experimentally analysed the mechanical properties and failure modes of these metamaterials.

Finite Element simulations were also used to study the high-strain compressive performance of these systems under both periodic boundary conditions and realistic, finite conditions. Experimental uniaxial compressive loading tests were applied to additively manufactured prototypes and digital image correlation was used to measure the Poisson’s ratio and analyse the deformation behaviour of these systems.

The results obtained demonstrate that these systems have the ability to exhibit a wide range of Poisson’s ratios (positive, quasi-zero and negative values) and stiffnesses as well as unusual failure modes characterised by a sequential layer-by-layer collapse of specific, non-adjacent ligaments. These findings provide useful insights on the mechanical properties and deformation behaviours of this new class of metamaterials and indicate that these chiral honeycombs could potentially possess anomalous characteristics which are not commonly found in traditional chiral metamaterials based on regular monohedral tilings.

To the best of the authors’ knowledge, the authors have analysed for the first time the high strain behaviour and failure modes of chiral metamaterials based on Euclidean multi-polygonal tessellations.

Although ceramic additive manufacturing (AM) could be used to fabricate complex, high-resolution parts for diverse, functional applications, one ongoing challenge is optimizing the post-process, particularly sintering, conditions to consistently produce geometrically accurate and mechanically robust parts. This study aims to investigate how sintering temperature affects feature resolution and flexural properties of silica-based parts formed by vat photopolymerization (VPP) AM.

Test artifacts were designed to evaluate features of different sizes, shapes and orientations, and three-point bend specimens printed in multiple orientations were used to evaluate mechanical properties. Sintering temperatures were varied between 1000°C and 1300°C.

Deviations from designed dimensions often increased with higher sintering temperatures and/or larger features. Higher sintering temperatures yielded parts with higher strength and lower strain at break. Many features exhibited defects, often dependent on geometry and sintering temperature, highlighting the need for further analysis of debinding and sintering parameters.

To the best of the authors’ knowledge, this is the first time test artifacts have been designed for ceramic VPP. This work also offers insights into the effect of sintering temperature and print orientation on flexural properties. These results provide design guidelines for a particular material, while the methodology outlined for assessing feature resolution and flexural strength is broadly applicable to other ceramics, enabling more predictable part performance when considering the future design and manufacture of complex ceramic parts.

This article focusses on the hybrid strategy, a simultaneous combination of cost leadership and differentiation strategy. The study aims to examine the impact of hybrid strategy on firm performance through its anticipated positive effects on process and product innovation. In addition, we study the moderating role of adaptive capacity in the direct relationships of hybrid strategy with process and product innovation.

Structural equation modelling was used to analyse 1,842 Spanish firms with fewer than 250 employees. We randomly selected small and medium-sized enterprises (SMEs) operating in Spain from the Spanish Central Business Directory (2021) database. The overall sample design was based on stratified sampling.

We found that hybrid strategy is positively related to firm performance and to process and product innovation. Additionally, in firms implementing hybrid strategies, process innovation fostered firm performance. Finally, adaptive capacity strengthened the relationships of hybrid strategy with process and product innovation. This sheds light on how and when hybrid strategy is most effective in fostering SME performance.

We highlight that SMEs need to establish strategies that use diverse resources and capabilities and not just generate competitive advantage using one strategy (cost leadership or differentiation strategy). This requires an agile and flexible systems and structures.

Our research provides novel results by proposing the adoption of hybrid strategies instead of pure strategies (cost leadership and differentiation strategy) as a way for SMEs to survive during crises. Unlike “stuck in the middle” strategies, our study demonstrates the importance of hybrid strategies in a comprehensive model that links them to innovation and firm performance, with adaptive capacity being a determining factor.