Search results

As after-hours technology-mediated work (ATW) becomes common in organizations, the increased workload and interference to life caused by ATW has induced employee turnover. This research develops a mediated moderation model to explain how employees' intrinsic and extrinsic motivations for ATW affect their turnover intention through work–life conflict.

A survey was conducted to collect data of 484 employees from Chinese companies. Partial Least Square was used to perform data analysis.

The results show that intrinsic motivation for ATW has an indirect negative impact on turnover intention via work–life conflict, whereas extrinsic motivation for ATW has both a positive direct impact and a positive indirect impact (via work–life conflict) on turnover intention. This study also helps find that time spent on ATW can strengthen the positive impact of extrinsic motivation for ATW on turnover intention but has no moderation effect on the impact of intrinsic motivation for ATW. Furthermore, this study reveals that the interaction effect of time spent on ATW and extrinsic motivation on turnover intention is mediated by employees' perceived work–life conflict.

By discovering the distinct impact of employees' intrinsic and extrinsic motivations for ATW on turnover intention, this research provides a contingent view regarding the impact of ATW and offers guidance to managers regarding how to mitigate ATW-induced turnover intention through fostering different motivations.

While existing research has explored the association between supervisor support and turnover intention among construction workers, there is a notable gap in the literature concerning the potential mediating role of work engagement in elucidating this relationship, warranting further investigation. The paper, hence, aims to examine the mediating role of work engagement in the relationship between supervisor support and turnover intention among construction workers.

Based on the quantitative research method, the hypothesis was tested. The data were collected from 144 construction professionals using a structured questionnaire. Observed variables were tested using confirmatory factor analysis, and the mediating role relationship was validated using hierarchical regression.

The outcome of this study shows a significant positive impact of work engagement and supervisor support on employee turnover intention. The study further showed that work engagement plays a mediating role in the connection between supervisory support and the intention to turnover and improve project and business performance. Turnover intention, on the other hand, negatively affects project and organizational performance.

By enhancing employee work engagement and perceptions of supervisor support, the findings of this study may aid construction organizations in making better judgments regarding the likelihood of employee turnover. The effectiveness of the project and the organization will likely be greatly impacted.

The results of this study provide supporting evidence and advance efforts at reducing employee turnover intention through work engagement and supervisor support in improving project and organizational performance.

Society is critically dependent on an adequate supply of hospital doctors to ensure optimal health care. Voluntary turnover amongst hospital doctors is, however, an increasing problem for hospitals. The aim of this study was to systematically review the extant academic literature to obtain a comprehensive understanding of the current knowledge base on hospital doctor turnover and retention. In addition to this, we synthesise the most common methodological approaches used before then offering an agenda to guide future research.

Adopting the PRISMA methodology, we conducted a systematic literature search of four databases, namely CINAHL, MEDLINE, PsycINFO and Web of Science.

We identified 51 papers that empirically examined hospital doctor turnover and retention. Most of these papers were quantitative, cross-sectional studies focussed on meso-level predictors of doctor turnover.

Selection criteria concentrated on doctors who worked in hospitals, which limited knowledge of one area of the healthcare environment. The review could disregard relevant articles, such as those that discuss the turnover and retention of doctors in other specialities, including general practitioners. Additionally, being limited to peer-reviewed published journals eliminates grey literature such as dissertations, reports and case studies, which may bring impactful results.

Globally, hospital doctor turnover is a prevalent issue that is influenced by a variety of factors. However, a lack of focus on doctors who remain in their job hinders a comprehensive understanding of the issue. Conducting “stay interviews” with doctors could provide valuable insight into what motivates them to remain and what could be done to enhance their work conditions. In addition, hospital management and recruiters should consider aspects of job embeddedness that occur outside of the workplace, such as facilitating connections outside of work. By resolving these concerns, hospitals can retain physicians more effectively and enhance their overall retention efforts.

Focussing on the reasons why employees remain with an organisation can have significant social repercussions. When organisations invest in gaining an understanding of what motivates their employees to stay in the job, they are better able to establish a positive work environment that likely to promote employee well-being and job satisfaction. This can result in enhanced job performance, increased productivity and higher employee retention rates, all of which are advantageous to the organisation and its employees.

The review concludes that there has been little consideration of the retention, as opposed to the turnover, of hospital doctors. We argue that more expansive methodological approaches would be useful, with more qualitative approaches likely to be particularly useful. We also call on future researchers to consider focussing further on why doctors remain in posts when so many are leaving.

The purpose of this study is to investigate the benefits and challenges of implementing circular economy (CE), as well as shed light on the influence of procurement strategy in CE implementation in construction projects.

A qualitative research approach with abductive reasoning was adopted. The empirical data were collected from the construction industry in the United Arab Emirates (UAE).

The results reveal that clients, consultants and contractors have limited awareness, knowledge and motivation to implement CE in construction projects. The absence of incentives to design projects following CE principles, lack of involvement of contractors and suppliers, non-use of materials that use CE principles and current procurement strategies are the main challenges for the implementation of CE in the UAE.

Previous research offers limited knowledge on CE and its implementation in construction projects particularly from a procurement strategy perspective. The findings of the study provide new knowledge of the benefits, challenges and role of procurement strategy for implementing CE. It is suggested that collaborative and partnering-based procurement methods are needed to facilitate the effective implementation of CE.

Previous studies have postulated that an advance payment system (APS) positively impacts the contractor's working capital and is paramount to ensuring an efficient and effective project cash flow process. However, scant research has been undertaken to empirically establish the cash flow performance and domino effect of APS on project and organisational performance.

The epistemological design adopted a positivist philosophical stance augmented by deductive reasoning to explore the phenomena under investigation. Primary quantitative data were collected from 504 Construction Industry Development Board (CIDB) registered contractors (within the grade bandings 1–9) in South Africa. A five-point Likert scale was utilised, and subsequent data accrued were analysed using structural equation modelling (SEM).

Emergent findings reveal that the mandatory use of an APS does not guarantee a positive project cash flow, an improvement in organisational performance or an improvement in project performance.

The ensuing discussion reveals the contributory influence of APS on positive cash flow and organisational performance, although APS implementation alone will not achieve these objectives. Practically, the research accentuates the need for various measures to be concurrently adopted (including APS) towards ensuring a positive project cash flow and improved organisational and project performance.

There is limited empirical research on cash flow performance and the domino effect of APS on project and organisational performance in South Africa, nor indeed, the wider geographical location of Africa as a continent. This study addresses this gap in the prevailing body of knowledge.

The purpose of this paper is to assess the appropriateness of equal weights estimation (sumscores) and the application of the composite equivalence index (CEI) vis-à-vis differentiated indicator weights produced by partial least squares structural equation modeling (PLS-SEM).

The authors rely on prior literature as well as empirical illustrations and a simulation study to assess the efficacy of equal weights estimation and the CEI.

The results show that the CEI lacks discriminatory power, and its use can lead to major differences in structural model estimates, conceals measurement model issues and almost always leads to inferior out-of-sample predictive accuracy compared to differentiated weights produced by PLS-SEM.

In light of its manifold conceptual and empirical limitations, the authors advise against the use of the CEI. Its adoption and the routine use of equal weights estimation could adversely affect the validity of measurement and structural model results and understate structural model predictive accuracy. Although this study shows that the CEI is an unsuitable metric to decide between equal weights and differentiated weights, it does not propose another means for such a comparison.

The results suggest that researchers and practitioners should prefer differentiated indicator weights such as those produced by PLS-SEM over equal weights.

To the best of the authors’ knowledge, this study is the first to provide a comprehensive assessment of the CEI’s usefulness. The results provide guidance for researchers considering using equal indicator weights instead of PLS-SEM-based weighted indicators.

The purpose of this paper is to evaluate the insights of founding entrepreneurs to understand what they consider as motivating factors in their decision to act upon entrepreneurial intentions. Using this information, the entrepreneurial trigger event influence was conceptualized, and a scale developed for use in subsequent testable models.

Qualitative and quantitative techniques were used to construct an instrument that measures the presence and influence of entrepreneurial behavior triggers. The concept of triggering events was explored with 14 founding entrepreneurs. Themes emerged from this enquiry process which informed the development of four primary entrepreneurial triggering events. Over 600 entrepreneurs participated in the study. Exploratory factor analysis was used to identify dimensions of entrepreneurial triggers and was tested using confirmatory factor analysis.

Entrepreneurs perceive that personal fulfillment and job dissatisfaction serve as two significant trigger events which will lead individuals to engage in entrepreneurial behaviors. This research supports theorizing that suggests entrepreneurial trigger events have influence in motivating individuals to act upon entrepreneurial intentions and some trigger events may have more influence toward behavior than others.

This research is subject to multiple limitations. Trigger events were limited to those identified in literature and the interviews. Most entrepreneurs participating in this study were from a limited geographic region. The entrepreneurs in this study reported their triggering event based on their memory which could have been affected by inaccurate recall or memory bias. No attempt has been made to model the comparative effects of the different variables on entrepreneurial outcomes. Finally, the entrepreneurial trigger event instrument did not measure the participant's demographics or psychographics which could have played a role in the influence of reported trigger event.

This study extends previous research that trigger events serve as catalysts for entrepreneurial behavior. Findings support the premise that different types of triggers have different levels of influence as antecedents of entrepreneurial behavior. Specifically, positive, negative, internal and external entrepreneurial triggering events were explicated. The Entrepreneurial Trigger Event Scale created to facilitate this study enables researchers to explore the effects of types and perceived influences of precipitating trigger events on the intentions of the individual that result in entrepreneurial behavior. The optimized instrument further expanded Shapero's (1975) proposed theory of the origins of entrepreneurial behavior.

The development of a scale provides researchers with the opportunity to include the influence of entrepreneurial trigger events, as perceived by entrepreneurs, in future testable models. Entrepreneurial development organizations can use the knowledge to assist in understanding when potential entrepreneurs may act upon entrepreneurial intentions. Information gained can have significant implications for understanding the initiation of entrepreneurial behavior, entity establishment and business growth.

This research responds to a call for investigation into the influence of entrepreneurial trigger events on a person's decision to act upon entrepreneurial intentions. It is an early attempt to conceptualize a relevant construct of entrepreneurial trigger event influence and to develop a scale for use in empirical testing. It is distinguished by using planned behaviors, push and pull, motivation and drive reduction theories. These theories are applied to the perceptions of successful entrepreneurs to develop a construct and validate it.

This paper integrates the action phase theory (APT) and the theory of planned behaviour (TPB) to analyse the dynamic mechanisms involved in the configuration of goals and implementation intentions throughout the entrepreneurship process.

The empirical analysis compares individuals in different phases of this process (not yet decided, potential and nascent entrepreneurs). A large sample of adults from Spain is analysed. Structural equation models and multi-group analysis (MGA) serve to test the hypotheses.

The results confirm that perceived behavioural control (PBC) is the most influential antecedent of entrepreneurial goal intention (EGI) in pre-actional phases (undecided and potential entrepreneurs), whilst attitude towards entrepreneurship (ATE) takes this role during nascency. Subjective norms (SNs) are more important in Phase 1 (establishing the goal) and in Phase 3 (performing nascent behaviour).

This study contributes to both the TPB and the APT. It provides the most relevant insight into the mental process that leads to starting up and helps explain certain previous conflicting results found in the literature. Additionally, it has important implications not only for theory building but also for support bodies and for entrepreneurship educators.

This paper aims to identify the combination of innovation determinants driving the creation of innovative products amongst market leaders and market followers in food and beverage (F&B) firms.

This research is based on the case study methodology by using two types of data sources: (1) semi-structured interviews with industry experts and (2) in-depth interviews with managers. In addition, a questionnaire adapted from prior research was used to consider market and firm types.

Suggesting an integrated theoretical framework based on firm-based factors and market-based factors, this study identified a combination of determinants significantly impacting innovative products in the market. Specifically, these determinants are competition intensity and innovation capability (a combination of research and development (R&D) investment and marketing capabilities). The study also examined how these determinants vary depending on whether the firms are market leaders or market followers.

This research provides practical insights for managers working in the F&B industry by using case studies and exploring the determinants of developing innovative products. In doing so, suitable strategies can be selected according to the market and firm situations.

The originality of the study is shown by focussing on how different combinations of market and firm factors could be applied in creating successful innovative products in the food sector.

Prior research has emphasised the importance of the early phases of construction projects, as well as the difficulties of procuring engineering services – especially due to the uncertainties. Despite that, studies on the public procurement of engineering services are scarce. Although scholars have shown that uncertainty may affect the choice of control modes, the level of uncertainty that characterises services is not addressed by the two task characteristics: knowledge of the transformation process and output measurability. The purpose is to investigate organisational control in public procurement of engineering services.

The existing control model was adjusted in this study by conceptually adding uncertainty as a third aspect to the two task characteristics. A single case study of the Swedish Transport Administration was used. The empirical data, comprising 14 interviews with managers from the client and engineering consulting companies, were analysed using flexible pattern matching and visual mapping approaches and then illustrated using the model.

The public client did not base its choice of control modes on uncertainty, but rather on the other two task characteristics. Consequently, the service providers argued that the chosen control modes reduced their creativity, increased their financial risks and caused unclear responsibilities. This study therefore shows that uncertainty is an important factor to consider in the choice of control modes, both from a theoretical perspective and from the service providers' point of view. The developed model may therefore be useful for researchers as well as practitioners.

This study is the first attempt to add uncertainty as a task characteristic when choosing control modes. The results contribute to the scarce control literature regarding the procurement of engineering services for construction projects and the procurement of other services with high uncertainty.