Search results

Mindfulness-based interventions are on the rise in workplace settings to enhance Well-Being and address work stress. Their popularity is in part due to the fact that they are often assumed to have a net positive impact on both workers’ Well-Being and organizational functioning. However, the majority of workplace mindfulness practice and research focuses on individual-level mindfulness interventions and their associated outcomes, like reduced stress. However, the modern workplace is highly dependent on positive team functioning, and the impact of mindfulness in teams is lesser known. This review differentiates individual mindfulness from team mindfulness and explores how both individual and team mindfulness impact team functioning. The authors review mindfulness and teams’ literature to understand antecedents, correlated mediators, and consequences of mindfulness in team contexts, team processes, and the boundary conditions related to mindfulness outcomes. This review adds to the budding theoretical conversation regarding mindfulness at work and contributes valuable insight into the practical applications of mindfulness in teams.

The purpose of this paper is to improve the mechanical and tribological properties of Si₃N₄ ceramics and to make the application of Si₃N₄ ceramics as tribological materials more extensive.

Si₃N₄-based composite ceramics (SN-2L) containing nitrogen-doped graphene quantum dots (N-GQDs) were prepared by hot press sintering process through adding 2 Wt.% nanolignin as precursor to the Si₃N₄ matrix, and the dry friction and wear behaviors of Si₃N₄-based composite against TC4 disc were performed at the different loads by using pin-on-disc tester.

The friction coefficients and wear rates of SN-2L composite against TC4 were significantly lower than those of the single-phase Si₃N₄ against TC4 at the load range from 15 to 45 N. At higher load of 45 N, SN-2L/TC4 pair presented the lowest friction coefficient of 0.25, and the wear rates of the pins and discs were as low as 1.76 × 10⁻⁶ and 2.59 × 10⁻⁴mm³/N·m. The low friction and wear behavior could be attributed to the detachment of N-GQDs from the ceramic matrix to the worn surface at the load of 30 N or higher, and then an effective lubricating film containing N-GQDs, SiO₂, TiO₂ and Al₂SiO₅ formed in the worn surface. While, at the same test condition, the friction coefficient of the single-phase Si₃N₄ against TC4 was at a range from 0.45 to 0.58. The spalling and cracking morphology formed on the worn surface of single-phase Si3N4, and the wear mechanism was mainly dominated by adhesive and abrasive wear.

Overall, a high-performance green ceramic composite was prepared, and the composite had a good potential for application in engineering tribology fields (such as aerospace bearings).

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0161/

Due to the harsh underground environment in coal mining, the surface of hydraulic support columns corrodes severely, resulting in significant economic losses. Therefore, a highly corrosion-resistant coatings is needed to extend the service life of the columns.

This study aims to compare the corrosion resistance of ST-Cr₃C₂-NiCr (sealed treatment Cr₃C₂-NiCr) coatings with industrially applied chromium plating. The corrosion failure mechanism of the coatings was investigated.

The results demonstrated that the ST-Cr₃C₂-NiCr coatings exhibited excellent corrosion resistance. After sealing treatment, the corrosion potential of Cr₃C₂-NiCr coatings was −0.215 V, and the corrosion current density of Cr₃C₂-NiCr coatings was lower than that of the plated parts.

ST-Cr₃C₂-NiCr coatings prepared by supersonic atmospheric plasma spraying could provide excellent corrosion resistance in the coal industry.

The low porosity and the presence of the NiCr phase were crucial factors contributing to the preferable corrosion resistance exhibited by the ST-Cr₃C₂-NiCr coatings. The corrosive process of the coatings involved layer-by-layer delamination of surface oxide film, sub-surface pitting, formation and degradation of sub-surface passive film, as well as severe block-like delamination.

House price fluctuations send vital signals to many parts of the economy, and long-term predictions of house prices are of great interest to governments and property developers. Although predictive models based on economic fundamentals are widely used, the common requirement for such studies is that underlying data are stationary. This paper aims to demonstrate the usefulness of alternative filtering methods for forecasting house prices.

We specifically focus on exponential smoothing with trend adjustment and multiplicative decomposition using median house prices for Sydney from Q3 1994 to Q1 2017. The model performance is evaluated using out-of-sample forecasting techniques and a robustness check against secondary data sources.

Multiplicative decomposition outperforms exponential smoothing at forecasting accuracy. The superior decomposition model suggests that seasonal and cyclical components provide important additional information for predicting house prices. The forecasts for 2017–2028 suggest that prices will slowly increase, going past 2016 levels by 2020 in the apartment market and by 2022/2023 in the detached housing market.

We demonstrate that filtering models are simple (univariate models that only require historical house prices), easy to implement (with no condition of stationarity) and widely used in financial trading, sports betting and other fields where producing accurate forecasts is more important than explaining the drivers of change. The paper puts forward a case for the inclusion of filtering models within the forecasting toolkit as a useful reference point for comparing forecasts from alternative models.

To the best of the authors’ knowledge, this paper undertakes the first systematic comparison of two filtering models for the Sydney housing market.

Online retail platform corporate sustainable development (ORPCSD) has garnered significant interest and appeal among consumers. However, no scale has been developed to measure consumer perceptions of ORPCSD. Therefore, this study aimed to delineate the conceptual framework and dimensions underlying these perceptions and construct a reliable and valid measurement tool.

This study employed established qualitative and quantitative methods in two studies. In the first study, the dimensions and measurement items of consumer perceptions of ORPCSD were proposed using the grounded method. In the second study, the measurement scale was refined and validated using exploratory factor analysis, confirmatory factor analysis, and nomological validity examination.

The results indicated that consumer perception of ORPCSD consisted of three dimensions: economic, social, and environmental sustainability. The measurement scale for these dimensions comprised 25 items, demonstrating excellent psychometric properties.

This study contributes original insights by enhancing the current understanding of consumer perceptions of ORPCSD. Additionally, it provides researchers and managers with psychometric metrics to gauge these perceptions and offers actionable strategies for sustainable marketing initiatives.

This study aims to deliver a new perspective on how the interaction of independent and cooperative innovation affects firm digitization. Based on resource constraint theory, this study argues that the aforementioned interaction negatively affects firm digitization. The moderating role of managerial discretion is also discussed in light of the principles of the awareness-motivation-capability (AMC) framework.

The proposed hypotheses are empirically tested using a negative binomial modeling approach. The data used are from A-share listed companies in China’s Shanghai and Shenzhen stock markets from 2006 to 2020.

This study suggests that the interaction of independent innovation and cooperative innovation negatively impacts digitization. In addition, this study argues that environmental discretion and organizational discretion weaken the negative impact of the mentioned interaction on digitization. However, additional discretion in the Chinese context has no effect on above relationships.

This study explores the impact of the interaction of independent and cooperative innovation on digitization and incorporates managerial discretion into this framework based on the AMC framework.

This study attempts to explore the linkages between reliable big and cloud data analytics capabilities (RB&CDACs) and the comparative advantage (CA) that applies in the manufacturing sector in the countries located in North Africa (NA). These are considered developing countries through generating green product innovation (GPI) and using green process innovations (GPrLs) in their processes and functions as mediating factors, as well as the moderating role of data-driven competitive sustainability (DDCS).

To achieve the aim of this study, 346 useable surveys out of 1,601 were analyzed, and valid responses were retrieved for analysis, representing a 21.6% response rate by applying the quantitative methodology for collecting primary data. Convergent validity and discriminant validity tests were applied to structural equation modeling (SEM) in the CB-covariance-based structural equation modeling (SEM) program, and the data reliability was confirmed. Additionally, a multivariate analysis technique was used via CB-SEM, as hypothesized relationships were evaluated through confirmatory factor analysis (CFA), and then the hypotheses were tested through a structural model. Further, a bootstrapping technique was used to analyze the data. We included GPI and GPrI as mediating factors, while using DDCS as a moderated factor.

The empirical findings indicated that the proposed moderated-mediation model was accepted due to the relationships between the constructs being statistically significant. Further, the findings showed that there is a significant positive effect in the relationship between reliable BCDA capabilities and CAs as well as a mediating effect of GPI and GPrI, which is supported by the proposed formulated hypothesis. Additionally, the findings confirmed that there is a moderating effect represented by data-driven competitive advantage suitability between GPI, GPrI and CA.

One of the main limitations of this study is that an applied cross-sectional study provides a snapshot at a given moment in time. Furthermore, it used only one type of methodological approach (i.e. quantitative) rather than using mixed methods to reach more accurate data.

This study developed a theoretical model that is obtained from reliable BCDA capabilities, CA, DDCS, green innovation and GPrI. Thus, this piece of work bridges the existing research gap in the literature by testing the moderated-mediation model with a focus on the manufacturing sector that benefits from big data analytics capabilities to improve levels of GPI and competitive advantage. Finally, this study is considered a road map and gaudiness for the importance of applying these factors, which offers new valuable information and findings for managers, practitioners and decision-makers in the manufacturing sector in the NA region.

The purpose of this paper is to investigate the impact of demand information sharing on products’ greening levels with downstream competition. Specifically, this study examine two types of green products, “development-intensive” (DI) and “marginal-cost intensive” (MI), in a two-echelon supply chain where the manufacturer produces substitutable products, and competing retailers operate in a market with uncertain demand.

The authors adopt the manufacturer-led Stackelberg game-theoretic framework and consider a multistage game. This study consider how retailers receive private signals about uncertain demand and decide whether to share this information with the manufacturer, who then decides whether to acquire this information at a certain given cost. This paper considers backward induction and Bayesian Nash equilibrium to solve the model.

The authors find that in the absence of competition, information sharing is the only equilibrium and improves the greening level under DI, whereas no-information sharing is the only equilibrium and improves the greening level under MI, an increase in downstream competition drives higher investment in greening efforts by the manufacturer in both DI and MI and the manufacturer needs to offer a payment to the retailers to obtain demand information under both simultaneous and sequential contract schemes.

This paper contributes to the literature by examining how the nature of products (margin intensive green product or development intensive green product) influences green supply chain decisions under information asymmetry and downstream competition.

Employees may adopt deceptive knowledge hiding (DKH) due to nonworking time information and communication technology (ICT) demands. Drawing from the conservation of resources (COR) theory, this study aims to develop and test a model of deceptive knowledge hiding (DKH) due to nonworking time information and communication technology (ICT) demands.

In total, 300 service employees have joined the three-wave surveys. Path analysis and bootstrapping methods were used to test the theoretical model.

Results suggest that knowledge requests during nonworking time could deplete employees’ resources and increase their tendency to engage in DKH, whereas work recovery and emotional exhaustion mediate this relationship. In addition, employees’ work–family segmentation preferences (WFSP) were found to moderate the direct effects of nonworking time ICT demands on employees’ work recovery and emotional exhaustion and the indirect effects of knowledge requests after working hours on DKH through employees’ work recovery and emotional exhaustion.

First, the findings of this study shed light on the relationship between knowledge requests during employees’ nonworking time and knowledge hiding, suggesting that knowledge hiding could occur beyond working hours. Second, drawing on COR theory, this study explored two joint processes of resource replenishment failure and depletion and how nonworking time ICT demands trigger knowledge hiding. Third, the interaction effect of individuals’ WFSP and nonworking time factors on knowledge hiding deepens the understanding of when nonworking time ICT demands may induce knowledge hiding through various processes.

Social media is booming in the digital age, and its rich availability provides many opportunities for companies to innovate across borders. In reality, how enterprises use social media to achieve cross-border innovation also faces important challenges such as breaking path dependency.

This paper explores how social media can facilitate cross-border innovation from the perspective of strategic capability, combined with the path dependency theory and attention-based view. Hierarchical regression analysis and bootstrap method are adopted to test the hypotheses based on survey data provided by 173 firms in China.

The findings show a positive relationship between social media strategic capability and cross-border innovation, with path dependency playing a mediating role. In addition, two internal and external contextual factors, namely customer embeddedness and competitive pressure, play moderating roles, with customer embeddedness negatively moderating the negative relationship between social media strategic capability and path dependency and competitive pressure negatively moderating the negative relationship between path dependency and cross-border innovation.

These findings provide not only new insights into social media and cross-border innovation but also theoretical guidance on how companies can effectively use social media in practice.