Search results

The aim was not to perform a systematic review but firstly to search in PubMed, Science Direct, Scopus and Web of Science databases on the papers published in the last five years using tools for reviewing the statement of preferred information item for systematic reviews without focusing on a randomized analysis and secondly to perform a bibliometric analysis on the properties of films and coatings added of tocopherol for food packaging.

On January 24, 2022, information was sought on the properties of films and coatings added of tocopherol for use as food packaging published in PubMed, Science Direct, Scopus and Web of Science databases. Further analysis was performed using bibliometric indicators with the VOSviewer tool.

The searches returned 33 studies concerning the properties of films and coatings added of tocopherol for food packaging, which were analyzed together for a better understanding of the results. Data analysis using the VOSviewer tool allowed a better visualization and exploration of these words and the development of maps that showed the main links between the publications.

In the area of food science and technology, the development of polymers capable of promoting the extension of the shelf life of food products is sought, so the knowledge of the properties is vital for this research area since combining a biodegradable polymeric material with a natural antioxidant active is of great interest for modern society since they associate environmental preservation with food preservation.

Renal failure is an end-stage consequence after persistent hyperglycemia during diabetic nephropathy (DN), and the etiology of DN has been linked to oxidative stress. The purpose of this research was to determine the beneficial synergistic effects of S-Allyl Cysteine (SAC) and Taurine (TAU) on oxidative damage in the kidneys of type 2 diabetic rats induced by hyperglycemia.

Experimental diabetes was developed by administering intraperitoneal single dose of streptozotocin (STZ; 65 mg/kg) with nicotinamide (NA; 230 mg/kg) in adult rats. Diabetic and control rats were treated with SAC (150 mg/kg), TAU (200 mg/kg) or SAC and TAU combination (75 + 100 mg/kg) for four weeks. The estimation of body weight, fasting blood glucose (FBG), oral glucose tolerance test (OGTT), oxidative stress markers along with kidney histopathology was done to investigate the antidiabetic potential of SAC/TAU in the NA/STZ diabetic group.

The following results were obtained for the therapeutic efficacy of SAC/TAU: decrease in blood glucose level, decreased level of thiobarbituric acid reactive substances (TBARS) and increased levels of GSH, glutathione-s-transferase (GST) and catalase (CAT). SAC/TAU significantly modulated diabetes-induced histological changes in the kidney of rats.

SAC/TAU combination therapy modulated the oxidative stress markers in the kidney in diabetic rat model and also prevented oxidative damage as observed through histopathological findings.

The major objective of this research work was to evaluate various physico-chemical characteristics, such as, chemical composition, antioxidant capacity, objective color and texture profile analysis (TPA) of the wheat flour/chickpea flour (CF) blends, so that nutritious baked products could be consumed by the type-2 diabetic persons.

Wholegrain wheat flour (WGF) and white wheat flour (WWF) were substituted with CF at 0 to 40% levels. These wheat flour/CF blends were analyzed for proximate composition, the prepared dough and baked breads were tested for objective color, antioxidant capacity as trolox equivalent antioxidant capacity (TEAC), malondialdehyde (MDA) and total phenolic content (TPC) and TPA.

WGF had the highest TEAC (117.42 mM/100g) value, followed by WWF (73.98 mM/100g) and CF (60.67 mM/100g). TEAC, MDA and TPC values varied significantly among all the three flour samples.

Inclusion of whole chickpea (without dehulling) flour in such type of blends would be another interesting investigation during the future research studies.

These research findings have a great potential for the production of these baked products for human consumption on an industrial scale.

Production of breads using wheat flour and CF blends would benefits the consumers.

Production of Arabic and pan breads using wheat flour and CF blends would, therefore, combine the benefits of both the needed proteins of plant origin and the health-promoting bioactive compounds, in a most sustainable way for the consumers.

In the developing field of nano-materials synthesis, copper oxide nanoparticles (NPs) are deemed to be one of the most significant transition metal oxides because of their intriguing characteristics. Its synthesis employing green chemistry principles has become a key source for next-generation antibiotics attributed to its features such as environmental friendliness, ease of use and affordability. Because they are more environmentally benign, plants have been employed to create metallic NPs. These plant extracts serve as capping, stabilising or hydrolytic agents and enable a regulated synthesis as well.

Organic chemical solvents are harmful and entail intense conditions during nanoparticle synthesis. The copper oxide NPs (CuO-NPs) synthesised by employing the green chemistry principle showed potential antitumor properties. Green synthesised CuO-NPs are regarded to be a strong contender for applications in the pharmacological, biomedical and environmental fields.

The aim of this study is to evaluate the anticancer potential of CuO-NPs plant extracts to isolate and characterise the active anticancer principles as well as to yield more effective, affordable, and safer cancer therapies.

This review article highlights the copper oxide nanoparticle's biomedical applications such as anticancer, antimicrobial, dental and drug delivery properties, future research perspectives and direction are also discussed.

The purpose of this article is to investigate on changes of the microbial load and the chemical and physical properties of date fruits stored for 6 months under two different temperatures.

A composite sample of 100 kg date fruits from the Khalas variety, season 2019, was collected from the local market in Al Ahsa Province, Saudi Arabia, packaged in 1 kg lots, stored at room and refrigerator temperatures and the microbial contamination and the chemical and physical properties monitored over a period of six months of storage. Total bacteria, lactic acid bacteria, Enterobacteriaceae, yeasts and molds were counted and representatives of yeast and mold contaminants were identified using morphological, physiological and molecular typing techniques. Changes in the color and texture of the samples were also monitored during storage.

The yeasts detected were two strains of each of Lachancea thermotolerans and Rhodosporidiobolus fluvialis and one strain of Cystofilobasidium lacus-mascardii. For molds, one strain of each of Aspergillus niger, Aspergillus flavus, Penicillium chrysogenum and Aspergillus caespitosus have been detected. No significant growth of these microorganisms was observed, but enough load persisted during storage that makes the samples not meeting the microbiological standards. There were significant changes in the color and texture of the fruits during storage.

These findings add important information that can help producers and processors to improve quality and promote marketing of date fruits, especially to international markets.

The purpose of this study was to determine the influence of environmental pH on production of biofilms and virulence genes expression in Pseudomonas aeruginosa.

Among 303 clinical and environmental samples 109 (61 + 48) isolates were identified as clinical and environmental P. aeruginosa isolates, respectively. Clinical samples were obtained from patients in the Al-Yarmouk hospital in Baghdad city, Iraq. Waste water from Al-Yarmouk hospital was used from site before treatment unit to collect environmental samples. The ability of producing biofilm at various pH levels was examined by microtiter plate and the prevalence of Alg D, Psl A and Pel A was determined by quantitative real time-polymerase chain reaction (qRT-PCR).

This study showed that the ability of clinical and environmental isolates to biofilm development was observed in 86.9% and 85.42% of clinical and environmental isolates, respectively. As well as, the environmental P. aeruginosa isolates showed the highest biofilm production at pH 7. Clinical isolates showed the highest genes expression of Alg D, Psl A and Pel A as compared to environmental isolates with pH change. In general, both clinical and environmental isolates formed biofilm and carried AlgD, PslA and PelA genes. Also, alkaline pH was favored for biofilm production.

There are very few studies done to find out the influence of environmental pH on production of biofilms and virulence genes expression in Pseudomonas aeruginosa. This study is unique as it has highlighted the influence of environmental pH on the ability of clinical and environmental isolates to biofilm development and genes expression.

The purpose of this article is to provide information about interactions between pink-pigmented facultative methylotroph (PPFM) organisms and plants, their molecular mechanisms of methylotrophic metabolism, application of PPFMs in agriculture, biotechnology and bioremediation and also to explore lacuna in PPFMs research and direction for future research.

Research findings on PPFM organisms as potent plant growth promoting organisms are discussed in the light of reports published by various workers. Unexplored field of PPFM research are detected and their application as a new group of biofertilizer that also help host plants to overcome draught stress in poorly irrigated crop field is suggested.

PPFMs are used as plant growth promoters for improved crop yield, seed germination capacity, resistance against pathogens and tolerance against drought stress. Anti-oxidant and UV resistant properties of PPFM pigments protect the host plants from strong sunshine. PPFMs have excellent draught ameliorating capacity.

To meet the ever increasing world population, more and more barren, less irrigated land has to be utilized for agriculture and horticulture purpose and use of PPFM group of organisms due to their draught ameliorating properties in addition to their plant growth promoting characters will be extremely useful. PPFMs are also promising candidates for the production of various industrially and medicinally important enzymes and other value-added products. Wider application of this ecofriendly group of bacteria will reduce crop production cost thus improving economy of the farmers and will be a greener alternative of hazardous chemical fertilizers and fungicides.

Graphicalabstract:

Recognizing novel entrepreneurial opportunities arising from a crisis is of paramount importance for firms. Hence, understanding the pivotal factors that facilitate firms in this endeavor holds significant value. This study delves into such factors within a representative empirical context impacted by a crisis, drawing insights from existing literature on opportunity recognition during such tumultuous periods.

The authors conducted a qualitative inspection of 14 Italian firms during the COVID-19 pandemic crisis. The authors collected a rich body of multi-source qualitative data, including 34 interviews (with senior managers and entrepreneurs) and secondary data (press releases, videos, web interviews, newspapers, reports and academic articles) in two phases (March–August 2020 and September–December 2020).

The results suggest the existence of a process model of opportunity recognition during crises based on five entrepreneurial influencing factors (entrepreneurial knowledge, entrepreneurial alertness, entrepreneurial proclivity, entrepreneurial personality and entrepreneurial purpose).

Various scholars have highlighted that, in times of crises, it is not easy and indeed very challenging for entrepreneurs to identify novel entrepreneurial opportunities. However, recent research has shown that crises can also positively impact entrepreneurs and their capacity to identify new entrepreneurial opportunities. Given these findings, not much research has analyzed the process by which entrepreneurs identify novel entrepreneurial opportunities during crises. This study shows that some entrepreneurial influencing factors are very important to identify new entrepreneurial opportunities during crises.

In this case study, we examine how a citrus peel valorising company based in the Netherlands was able to adopt a circular business model while navigating regulatory, managerial, and supply chain-related barriers.

In-depth, semi-structured interviews with key personnel in the company, notes from field observations, photographs of the production process, and documents from a legal judgement served as data for this single, qualitative case study. Data were coded inductively using the in vivo technique and were further developed into four themes and a case description.

Results from our study indicate that the regulatory and political contexts in the Netherlands were critical to the company’s success. Like in the case of most fruitful industrial symbioses, partnerships founded on mutual trust and economically appealing value propositions played a crucial role in ensuring commercial viability. Collaborating with larger corporations and maintaining transparent communication with stakeholders were also significant contributing factors. Lastly, employees’ outlook towards circularity combined with their willingness to learn new skills were important driving factors as well.

In addition to expanding the scholarship on the adoption of circular business models, this research offers novel insights to policymakers and practitioners. It provides empirical evidence regarding the importance of public awareness, adaptable legislation, and harmonised policy goals for supporting sustainable entrepreneurship in the circular economy.

The purpose of this paper is to investigate the most recurrent variables characterizing the collaborative relationships of industrial symbiosis (IS) (hereinafter also referred to as “anatomic” variables) established in the attempt to adopt circular economy (CE) by collecting evidence from a rich empirical set of implementation cases in Italy.

The current literature on IS was reviewed, and a content analysis was performed to identify and define the “anatomic” variables affecting its adoption in the circular economy. We followed a multiple-case study methodology investigating 50 cases of IS in Italy and performed a content analysis of the “anatomic” variables characterizing each case.

This research proposes the “anatomic” variables (i.e. industrial sectors involved, public actors involvement, governmental support, facilitator involvement and geographical proximity) explaining the cases of IS in the circular economy. Each “anatomic” variable is discussed at length based on the empirical evidence collected, with a particular reference to the impact on the different development strategies (i.e. “bottom-up” and “top-down”) in the cases observed.

Current literature on IS focuses on a sub-set of variables characterizing collaboration in IS. This research builds on extant literature to define a new framework of five purposeful “anatomic” variables defining IS in the circular economy. Moreover, we also collect and discuss a broad variety of empirical evidence in what is a still under-investigated context (i.e. Italy).