Search results

This study aims to investigate if engineered compression variations using moisture-responsive knitted fabric design can improve breast support in seamless knitted sports bras.

An experimental approach was used to integrate a novel moisture-responsive fabric panel into a seamless knitted bra, and the resulting compression variability in dry versus wet conditions were compared with those of a control bra. Air permeability and elongation testing of between breasts fabric panels was conducted in dry and wet conditions, followed by three-dimensional body scanning of eight human participants wearing the two bras in similar conditions. Questionnaires were used to evaluate perceived comfort and breast support of both bras in both conditions.

Air permeability test results showed that the novel panel had the highest variance between dry and wet conditions, confirming its moisture-responsive design, and increased its elongation coefficient in both wale and course directions in wet condition. There were significant main effects of bra type and body location on breast compression measurements. Breast circumferences in the novel bra were significantly larger than in the control bra condition. The significant two-way interaction between bra type and moisture condition showed that the control bra lost compressive power in wet condition, whereas the novel bra became more compressive when wet. Changes in compression were confirmed by participants’ perception of tighter straps and drier breast comfort.

These findings add to the limited scientific knowledge of moisture adaptive bra design using engineered knitted fabrics via advanced manufacturing technologies, with possible applications beyond sports bras, such as bras for breast surgery recovering patients.

Photovoltaic (PV) systems are experiencing exponential growth due to environmental concerns, unlimited and ubiquitous solar energy, and starting-to-make-sense panel costs. Alongside designing more efficient solar panels, installing solar trackers and special circuitry for optimizing power delivery to the load according to a maximum power point tracking (MPPT) algorithm are other ways of increasing efficiency. However, it is critical for any efficiency increase to account for the power consumption of any amendments. Therefore, this paper aims to propose a novel tracker while using MPPT to boost the PV system's actual efficiency accounting for the involved costs.

The proposition is an experimental pneumatic dual-axis solar tracker using light-dependent resistor (LDR) sensors. Due to its embedded energy storage, the pneumatic tracker offers a low duty-cycle operation leading to tracking energy conservation, fewer maintenance needs and scalability potential. While MPPT assures maximum load power delivery, the solar PV's actual delivered power is calculated for the first time, accounting for the solar tracking and MPPT power costs.

The experiments' results show an increase of 37.6% in total and 35.3% in actual power production for the proposed solar tracking system compared to the fixed panel system, with an MPPT efficiency of 90%. Thus, the pneumatic tracking system offers low tracking-energy consumption and good actual power efficiency. Also, the newly proposed pneumatic stimulant can significantly simplify the tracking mechanism and benefit from several advantages that come along with it.

To the best of the authors’ knowledge, this work proposes, for the first time, a single-motor pneumatic dual-axis tracker with less implementation cost, less frequent operation switching and scalability potential, to be developed in future works. Also, the pneumatic proposal delivers high actual power efficiency for the first time to be addressed.

Green building (GB) maintenance is increasingly accepted in the construction industry, so it can now be interpreted as an industry best practice for maintenance planning. However, the performance competency and design knowledge of the practice's building control instrument process can be affected by its evaluation and the information management of building information modelling (BIM)–based model checking (BMC). These maintenance-planning problems have not yet been investigated in instances such as the Grenfell Tower fire (14 June 2017, approximately 80 fatalities) in North Kensington, West London.

This study proposes a theoretical framework for analysing the existing conceptualisation of BIM tools and techniques based on a critical review of GB maintenance environments. These are currently employed on GB maintenance ecosystems embedded in project teams that can affect BMC practices in the automation system process. In order to better understand how BMC is implemented in GB ecosystem projects, a quantitative case study is conducted in the Malaysian public works department (Jabatan Kerja Raya (JKR)).

GB ecosystem projects were not as effective as planned due to safety awareness, design planning, inadequate track insulation, environmental (in) compatibility and inadequate building access management. Descriptive statistics and an ANOVA were applied to analyse the data. The study is reinforced by a process flow, which is transformed into a theoretical framework.

Industry practitioners can use the developed framework to diagnose BMC application issues and leverage the staff competency inherent in an ecosystem to plan GB maintenance environments successfully.

In a recent quasi-experimental study, the effects of a large German public startup support measure entitled “EXIST – Business Startup Grant” (EGS) on a variety of outcomes were determined, but without examining which factors are responsible for these program effects. The present study investigates the contribution of several factors to the success of the program in promoting product development and business planning.

By means of a two-wave panel design and fixed-effects panel regressions, evidence is generated that provides unique insights into the effect mechanisms of a publicly funded startup grant. The data for the study come from the program monitoring of the startup support measure.

Several factors were identified that significantly drive the effects of the program on the product development and business planning stages, namely the program-induced improvement of the skills of the startup team, intensification of cooperation with pilot customers/users, increase in the degree of networking and advice/support from third parties and the effort put into business plan preparation.

Startup support programs are a crucial aspect of technology and innovation policies, which are often evaluated in order to find out whether they generate effects. Assessing whether a program is effective or not, however, does not usually allow specific recommendations on how to improve the measure to be developed. Further information on the mechanisms of intervention is needed for this purpose. The present study takes up on this idea and provides this information for a specific type of public startup support measure.

This study evaluates the aesthetic perception of photovoltaic (PV) systems situated at various locations on an apartment building facade, comparing them with the original facade. It also aims to understand how aesthetic dimensions influence the perception of PV installations in diverse building locations. Moreover, it aims to create a framework that will guide for installing PV installations considering both their functionality and aesthetics.

The study uses a mixed-method approach, including qualitative and quantitative approaches. It includes a literature review and a questionnaire. 418 participants evaluated different PV-embedded facades using a Likert scale across various aesthetic variables.

The findings indicate that aesthetic perceptions of PV vary by the location of installation. It also shows that all aesthetic dimensions affect PV installation aesthetics, with location-specific preferences. For original elevation, compatibility and simplicity are given precedence over blending and coherence for windows, creativity and harmony for facades, functionality and harmony for balconies, and innovation potential and simplicity for roofs.

This study focuses on a single building type; further investigation is required to examine other building types. It also examined one PV technology with common visual properties, but future studies can examine others. Additional research is needed to compare the participating groups and the effect of their sociodemographic factors, using on-site surveys and interviews.

Few studies have investigated how PV systems affect apartment building users' architectural aesthetic perception. The results of this study make a valuable contribution to the field of sustainable architecture by providing practical guidance for architects, engineers, stakeholders, and researchers who are interested in integrating aesthetic, user-centric considerations into renewable energy solutions.

In this research, the initial list of internal capabilities in small and medium-sized enterprises (SMEs) leading to success in international markets has been extracted. Then, the most relevant capabilities to international SMEs under servitisation and hybrid offerings have been screened. Next, the selected capabilities have been classified, and ultimately the relationship amongst the capabilities has been analysed. The conceptual model for SMEs participating in international markets with hybrid offerings has been illustrated.

A literature review has been employed to extract the initial list of internal capabilities to address the research objectives. Then, a novel hesitant fuzzy Delphi (HFD) method has been developed to select the most relevant capabilities for SMEs for hybrid offerings in international markets by using the experts opinions. Subsequently, a novel hesitant fuzzy interpretive structural modelling (HFISM) has been developed to classify the capabilities, design a level-based conceptual model and present the relationship amongst the prominent capabilities.

After the literature review, sixteen internal capabilities leading to success in the international market via hybrid offerings have been extracted. Then, eight selected capabilities were chosen for further investigation by applying 15 expert opinions and via the HFD approach. According to HFISM results, a level-based conceptual model was emanated, and “ability to take advantage of international opportunities”, “financial strength”, “technology level” and “efficient innovation management” were considered as the most fundamental capabilities resulting in successful hybrid offerings in international markets.

Alongside the multi-layer decision-making approach developed in this manuscript to analyse the internal capabilities roles in hybrid offering success towards international markets, to the best knowledge of the authors, the hesitant fuzzy approaches developed in this article have not been previously presented by any other scholar. A novel HFD approach has been designed for consensus amongst the experts under uncertain circumstances. Furthermore, a novel HFISM has been suggested and employed in this research to comprehend the relationship amongst the internal capabilities.

This study examines the non-linear impact of financial development on income inequality and analyses the mediators through which financial development affects income inequality.

The study uses a dynamic panel threshold method with an endogeneous threshold variable on a comprehensive sample of 85 countries over the period of 1996-2015.

The author finds that financial development activities increase income inequality in developed countries. However, financial development promotes income equality in developing countries. Further, the study finds that education and institutional quality are the channels through which financial development has non-linear impacts on income inequality.

The study explores relatively new method to examine the nonlinear impact of financial development and also considers new dataset for the main explanatory variable.

This paper assesses the environment of legitimacy by determining the role of institutional quality and policy uncertainty on the performance of five major South Asian stock markets (India, Pakistan, Bangladesh, Sri Lanka, and Nepal) using 21 years data from 2000 to 2020. The focus of this study is to approach the issue of the environment of legitimacy that leads to sustained market returns.

Panel cointegration tests of Kao and Pedroni are applied, and the Dynamic Panel Vector Autoregressive (PVAR) model is used to determine the estimates.

ADF P-Values of both Kao and Pedroni tests show that the panels are cointegrated; the statistical significance of the results of the Kao and Pedroni panel cointegration test confirms cointegration among the variables. After determining the most appropriate lag, the analysis is done using PVAR. The results indicate that institutional quality, policy uncertainty, and GDP positively affect stock market return. Meanwhile, government actions and inflation negatively affect stock market returns. On the other hand, stock market return positively affects institutional quality, government action, policy uncertainty, and GDP. While stock market return negatively affects inflation.

The sample is taken only from a limited number of South Asian countries, and the period is also limited to 21 years.

Based on our research findings, we have identified several policy implications recommended to enhance and sustain the performance of stock markets.

This paper uses a unique analytical tool, which gives a better insight into the problem. The value of this work lies in its findings, which also have practical implications and theoretical significance.

This study examines the effect of social media marketing on voting intention applying a combination of fuzzy logic methodology and a multidimensional panel data model.

The study adopts a multidimensional panel data method that includes several fixed effects. The dependent variable is a multifaceted construct that measures the participants’ intention to vote. The independent variables are electronic word of mouth (eWOM), customisation (CUS), entertainment (ENT), interaction (INT), trendiness (TRD), candidate’s perceived image (CPI), religious beliefs (RB), gender and age. The grouping variables that signify fixed effects are employment status, level of education, mostly used social media and religion. First, the significance of said fixed effects was tested through an ANOVA process. Then, the main model was estimated, including the significant grouping variables as fixed effects.

Employment status and level of education were significant fixed effects. Also, eWOM, ENT, INT, CPI, RB and gender significantly affected participants’ voting intention.

Being based on a questionnaire that asked participants about how they perceive different aspects of social media, the present study is limited to their perceptions. Therefore, further studies covering the voters’ behaviour in action could be efficient complements to the present study.

The findings could guide the political parties into prioritizing the aspects of social media in forming an effective campaign resulting in being elected.

The findings have the potential to help the public in making better informed decisions when voting. Furthermore, the results of this study indicate applications for social media which are beyond leisure time fillers.

Fuzzy logic and multidimensional panel data estimates are this study’s novelty and originality. Structural equation modelling and crisp linguistic values have been used in previous studies on social media’s effect on voting intent. The former refines the data gathered from a questionnaire, and the latter considers the possibility of including different grouping factors to achieve a more efficient and less biased estimation.

Driven by the development of the global digital economy, knowledge management in industrial enterprises offers more possibilities for green innovation. Based on the perspective of external knowledge sources, this study aims to construct a panel regression model to explore the relationship between digital economy and industrial green innovation efficiency.

Panel data from 30 regions in China from 2011 to 2020 were selected as research samples. All data are obtained from national and provincial statistical yearbooks. Coupling coordination degree analysis, entropy method, panel regression analysis, robustness test and threshold effect test by Stata 16.0 were used to test the hypotheses.

The empirical results demonstrate the hypotheses and reveal the following findings: the digital economy is positively related to industrial green innovation efficiency and external knowledge sources, and external knowledge sources mediate the relationship between them. Moreover, based on the threshold test results, the digital economy has a double-threshold effect on industrial green innovation efficiency.

Based on the perspective of external knowledge sources, the proposed mediating mechanism between the digital economy and industrial green innovation efficiency has not been established previously, further enriching the research on the antecedents and outcomes of external knowledge sources. Moreover, this study estimated the direct influence mechanism and double-threshold effect of the digital economy on industrial green innovation efficiency from theoretical and empirical analysis, thus responding to the call of scholars and adding to existing research on how the digital economy affects the green transformation of industrial enterprises.