Search results

Metal laser-powder-bed-fusion using laser-beam parts are particularly susceptible to contamination due to particles attached to the surface. This may compromise so-called technical cleanliness (e.g. in NASA RPTSTD-8070, ASTM G93, ISO 14952 or ISO 16232), which is important for many 3D-printed components, such as implants or liquid rocket engines. The purpose of the presented comparative study is to show how cleanliness is improved by design and different surface treatment methods.

Convex and concave test parts were designed, built and surface-treated by combinations of media blasting, electroless nickel plating and electrochemical polishing. After cleaning and analysing the technical cleanliness according to ASTM and ISO standards, effects on particle contamination, appearance, mass and dimensional accuracy are presented.

Contamination reduction factors are introduced for different particle sizes and surface treatment methods. Surface treatments were more effective for concave design features, however, the initial and resulting absolute particle contamination was higher. Results further indicate that there are trade-offs between cleanliness and other objectives in design. Design guidelines are introduced to solve conflicts in design when requirements for cleanliness exist.

This paper recommends designing parts and corresponding process chains for manufacturing simultaneously. Incorporating post-processing characteristics into the design phase is both feasible and essential. In the experimental study, electroless nickel plating in combination with prior glass bead blasting resulted in the lowest total remaining particle contamination. This process applied for cleanliness is a novelty, as well as a comparison between the different surface treatment methods.

In keeping with recent body image social trends, consumer demand for the adoption of plus-size models is increasing, although the use of thin models remains prevalent. The current study explores how consumers process information about fashion products displayed on different sizes of models in advertisements, focusing on model and consumer body sizes and both genders. As an underlying mechanism explaining how the relationship between model and consumer body sizes shapes consumer purchase intention, this study explores the role of guilt, shame and mental imagery.

The current study uses a text analytics technique to identify female consumers' general opinions of thin models in advertising. Employing a 3 (consumer body size: normal, overweight, obese) × 2 (model body size: thin, plus-size) × 2 (gender: male, female) between-subjects online experiment (n = 718), the main study comparatively analyzes the influences of plus-size and thin models on consumer responses.

The results reveal that, despite body positivity movements, thin models still generate negative emotions among female consumers. For obese female consumers, advertisements featuring plus-size models produce fewer negative emotions but not more mental imagery than advertisements featuring thin models. Conversely, for obese male consumers, advertisements featuring plus-size models generate more mental imagery but not more negative emotions than advertisements featuring thin models. The results also reveal that the relationship between consumer body size and guilt is moderated by perceived model size, which is also moderated by gender in generating mental imagery. While guilt plays a mediating role in enhancing mental imagery, resulting in purchase intention, shame does not take on this role.

This study is the first to present an integrated model that elucidates how consumers with varying body sizes respond to different sizes of models in advertising and how these responses impact purchase intentions.

Our findings only apply to contexts where consumers purchase fashion clothing in response to advertisements featuring thin versus plus-size models.

Exposing normal-size consumers to plus-size models generates less mental imagery, and thus, practitioners should seek to match the body sizes of the models featured in advertising to the body sizes of their target audience or ad campaigns that include both plus-size and thin models may help improve message persuasiveness in fashion advertising. Moreover, guilt-appeal advertising campaigns using thin models would appeal more to thin consumers of both genders than shame-appeal advertising.

Objects fabricated using additive manufacturing (AM) technologies often suffer from dimensional accuracy issues and other part-specific problems. This study aims to present a framework for estimating the printability of a computer-aided design (CAD) model that expresses the probability that the model is fabricated correctly via an AM technology for a specific application.

This study predicts the dimensional deviations of the manufactured object per vertex and per part using a machine learning approach. The input to the error prediction artificial neural network (ANN) is per vertex information extracted from the mesh of the model to be manufactured. The output of the ANN is the estimated average per vertex error for the fabricated object. This error is then used along with other global and per part information in a framework for estimating the printability of the model, that is, the probability of being fabricated correctly on a certain AM technology, for a specific application domain.

A thorough experimental evaluation was conducted on binder jetting technology for both the error prediction approach and the printability estimation framework.

This study presents a method for predicting dimensional errors with high accuracy and a completely novel approach for estimating the probability of a CAD model to be fabricated without significant failures or errors that make it inappropriate for a specific application.

Thin cracks on the surface, such as those found in nuclear power plant concrete structures, are difficult to identify because they tend to be thin. This paper aims to design a novel segmentation network, called U-shaped contextual aggregation network (UCAN), for better recognition of weak cracks.

UCAN uses dilated convolutional layers with exponentially changing dilation rates to extract additional contextual features of thin cracks while preserving resolution. Furthermore, this paper has developed a topology-based loss function, called ℓ_cl Dice, which enhances the crack segmentation’s connectivity.

This paper generated five data sets with varying crack widths to evaluate the performance of multiple algorithms. The results show that the UCAN network proposed in this study achieves the highest F1-Score on thinner cracks. Additionally, training the UCAN network with the ℓ_cl Dice improves the F1-Scores compared to using the cross-entropy function alone. These findings demonstrate the effectiveness of the UCAN network and the value of incorporating the ℓ_cl Dice in crack segmentation tasks.

In this paper, an exponentially dilated convolutional layer is constructed to replace the commonly used pooling layer to improve the model receptive field. To address the challenge of preserving fracture connectivity segmentation, this paper introduces ℓ_cl Dice. This design enables UCAN to extract more contextual features while maintaining resolution, thus improving the crack segmentation performance. The proposed method is evaluated using extensive experiments where the results demonstrate the effectiveness of the algorithm.

The purpose of this paper is to present current state of understanding on jet electrodeposition manufacturing; to compare various experimental parameters and their implication on as deposited features; and to understand the characteristics of jet electrodeposition deposition defects and its preventive procedures through available research articles.

A systematic review has been done based on available research articles focused on jet electrodeposition and its characteristics. The review begins with a brief introduction to micro-electrodeposition and high-speed selective jet electrodeposition (HSSJED). The research and developments on how jet electrochemical manufacturing are clustered with conventional micro-electrodeposition and their developments. Furthermore, this study converges on comparative analysis on HSSJED and recent research trends in high-speed jet electrodeposition of metals, their alloys and composites and presents potential perspectives for the future research direction in the final section.

Edge defect, optimum nozzle height and controlled deposition remain major challenges in electrochemical manufacturing. On-situ deposition can be used as initial structural material for micro and nanoelectronic devices. Integration of ultrasonic, laser and acoustic source to jet electrochemical manufacturing are current trends that are promising enhanced homogeneity, controlled density and porosity with high precision manufacturing.

This paper discusses the key issue associated to high-speed jet electrodeposition process. Emphasis has been given to various electrochemical parameters and their effect on deposition. Pros and cons of variations in electrochemical parameters have been studied by comparing the available reports on experimental investigations. Defects and their preventive measures have also been discussed. This review presented a summary of past achievements and recent advancements in the field of jet electrochemical manufacturing.

This paper aims to improve the manufacturability of additive manufacturing (AM) for topology-optimized (TO) structures. Enhancement of manufacturability focuses on modifying geometric constraints and classifying the building orientation (BO) of AM parts to reduce stresses and support structures (SSs). To this end, artificial intelligence (AI) networks are being developed to automate design for additive manufacturing (DfAM).

This study considers three geometric constraints for their correction by convolutional autoencoders (CAEs) and transfer learning (TL). Furthermore, BOs of AM parts are classified using generative adversarial (GAN) and classification networks to reduce the SS. To verify the results, finite element analysis (FEA) is performed to compare the stresses of modified components with the original ones. Moreover, one sample is produced by the laser-based powder bed fusion (LB-PBF) in the BO predicted by the AI to observe its SSs.

CAE and TL resulted in promoting the manufacturability of TO components. FEA demonstrated that enhancing manufacturability leads to a 50% reduction in stresses. Additionally, training GAN and pre-training the ResNet-18 resulted in 80%, 95% and 96% accuracy for training, validation and testing. The production of a sample with LB-PBF demonstrated that the predicted BO by ResNet-18 does not require SSs.

This paper provides an automatic platform for DfAM of TO parts. Consequently, complex TO parts can be designed most feasibly and manufactured by AM technologies with minimal material usage, residual stresses and distortions.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

Although ceramic additive manufacturing (AM) could be used to fabricate complex, high-resolution parts for diverse, functional applications, one ongoing challenge is optimizing the post-process, particularly sintering, conditions to consistently produce geometrically accurate and mechanically robust parts. This study aims to investigate how sintering temperature affects feature resolution and flexural properties of silica-based parts formed by vat photopolymerization (VPP) AM.

Test artifacts were designed to evaluate features of different sizes, shapes and orientations, and three-point bend specimens printed in multiple orientations were used to evaluate mechanical properties. Sintering temperatures were varied between 1000°C and 1300°C.

Deviations from designed dimensions often increased with higher sintering temperatures and/or larger features. Higher sintering temperatures yielded parts with higher strength and lower strain at break. Many features exhibited defects, often dependent on geometry and sintering temperature, highlighting the need for further analysis of debinding and sintering parameters.

To the best of the authors’ knowledge, this is the first time test artifacts have been designed for ceramic VPP. This work also offers insights into the effect of sintering temperature and print orientation on flexural properties. These results provide design guidelines for a particular material, while the methodology outlined for assessing feature resolution and flexural strength is broadly applicable to other ceramics, enabling more predictable part performance when considering the future design and manufacture of complex ceramic parts.

Many additively manufactured parts suffer from reduced interlayer strength. This anisotropy is necessarily tied to the orientation during manufacture. When individual features on a part have conflicting optimal orientations, the part is unavoidably compromised. This paper aims to demonstrate a strategy in which conflicting features can be functionally separated into “co-parts” which are individually aligned in an optimal orientation, selectively reinforced with continuous fiber, printed simultaneously and, finally, assembled into a composite part with substantially improved performance.

Several candidate parts were selected for co-part decomposition. They were printed as standard fused filament fabrication plastic parts, parts reinforced with continuous fiber in one plane and co-part assemblies both with and without continuous fiber reinforcement (CFR). All parts were loaded until failure. Additionally, parts representative of common suboptimally oriented features (“unit tests”) were similarly printed and tested.

CFR delivered substantial improvement over unreinforced plastic-only parts in both standard parts and co-part assemblies, as expected. Reinforced parts held up to 2.5x the ultimate load of equivalent plastic-only parts. The co-part strategy delivered even greater improvement, particularly when also reinforced with continuous fiber. Plastic-only co-part assemblies held up to 3.2x the ultimate load of equivalent plastic only parts. Continuous fiber reinforced co-part assemblies held up to 6.4x the ultimate load of equivalent plastic-only parts. Additionally, the thought process behind general co-part design is explored and a vision of simulation-driven automated co-part implementation is discussed.

This technique is a novel way to overcome one of the most common challenges preventing the functional use of additively manufactured parts. It delivers compelling performance with continuous carbon fiber reinforcement in 3D printed parts. Further study could extend the technique to any anisotropic manufacturing method, additive or otherwise.

The ability to characterise highly conducting objects, that may also be highly magnetic, by the complex symmetric rank–2 magnetic polarizability tensor (MPT) is important for metal detection applications including discriminating between threat and non-threat objects in security screening, identifying unexploded anti-personnel landmines and ordnance and identifying metals of high commercial value in scrap sorting. Many everyday non-threat items have both a large electrical conductivity and a magnetic behaviour, which, for sufficiently weak fields and the frequencies of interest, can be modelled by a high relative magnetic permeability. This paper aims to discuss the aforementioned idea.

The numerical simulation of the MPT for everyday non-threat highly conducting magnetic objects over a broad range of frequencies is challenging due to the resulting thin skin depths. The authors address this by employing higher order edge finite element discretisations based on unstructured meshes of tetrahedral elements with the addition of thin layers of prismatic elements. Furthermore, computer aided design (CAD) geometrical models of the non-threat and threat object are often not available and, instead, the authors extract the geometrical features of an object from an imaging procedure.

The authors obtain accurate numerical MPT characterisations that are in close agreement with experimental measurements for realistic physical objects. The assessment of uncertainty shows the impact of geometrical and material parameter uncertainties on the computational results.

The authors present novel computations and measurements of MPT characterisations of realistic objects made of magnetic materials. A novel assessment of uncertainty in the numerical predictions of MPT characterisations for uncertain geometry and material parameters is included.