Search results

The purpose of this article is to investigate the variables affecting heat transfer from the surfaces of a tall building and also the extent of the impact of each of them. Another purpose of this paper is to provide a suitable model for estimating the heat transfer coefficient of the external surfaces of the building according to the impact of variables.

In this study, the Taguchi's approach in the design of the experiments was used to reduce the number of experiments. Percent contributions factors into the overall and surface-averaged Nu of a square prism were obtained by the (ANOVA). The change in Nu by changing either of T, P, angle of attack and V were investigated by the (ANOM). The most significant factors affecting the value Nu were also identified to facilitate the design of thermal systems by eliminating the factors imposing no significant effect on the response in the molding phase. The set of conditions under which the air properties remained unchanged was identified. Five correlations were formulated to predict Nu.

Models used in BES, in which the effects of T, P, A and geometrical effects are not accounted for, are not reliable. The air pressure was found to impose no significant effect on the overall Nu of the considered square prism. Studied in the range of 274–303 K, the air temperature imposed a significant effect on the overall Nu. The results of ANOVA show the significant role of Re to predict Nu of tall buildings.

This article is taken from a doctoral dissertation.

The purpose of this study is to investigate the Dynamics of micropolar – water B Fluids flow simultaneously under the influence of thermal radiation and Soret–Dufour Mechanisms.

The thermal radiation contribution, the chemical change and heat generation take fluidity into account. The flow equations are used to produce a series of dimensionless equations with appropriate nondimensional quantities. By using the spectral homotopy analysis method (SHAM), simplified dimensionless equations have been quantitatively solved. With Chebyshev pseudospectral technique, SHAM integrates the approach of the well-known method of homotopical analysis to the set of altered equations. In terms of velocity, concentration and temperature profiles, the impacts of Prandtl number, chemical reaction and thermal radiation are studied. All findings are visually shown and all physical values are calculated and tabulated.

The results indicate that an increase in the variable viscosity leads to speed and temperature increases. Based on the transport nature of micropolar Walters B fluids, the thermal conductivity has great impact on the Prandtl number and decrease the velocity and temperature. The current research was very well supported by prior literature works. The results in this paper are anticipated to be helpful for biotechnology, food processing and boiling. It is used primarily in refrigerating systems, tensile heating to large-scale heating and oil pipeline reduction.

All results are presented graphically and all physical quantities are computed and tabulated.

This study aims to investigate the rarefaction effects on flow and thermal performances of an equivalent sand-grain roughness model for aerodynamic thrust bearing.

In this study, a model of gas lubrication thrust bearing was established by modifying the wall roughness and considering rarefaction effect. The flow and lubrication characteristics of gas film were discussed based on the equivalent sand roughness model and rarefaction effect.

The boundary slip and the surface roughness effect lead to a decrease in gas film pressure and temperature, with a maximum decrease of 39.2% and 8.4%, respectively. The vortex effect present in the gas film is closely linked to the gas film’s pressure. Slip flow decreases the vortex effect, and an increase in roughness results in the development of slip flow. The increase of roughness leads to a decrease for the static and thermal characteristics.

This work uses the rarefaction effect and the equivalent sand roughness model to investigate the lubrication characteristics of gas thrust bearing. The results help to guide the selection of the surface roughness of rotor and bearing, so as to fully control the rarefaction effect and make use of it.

In this study a numerical analysis of the elastohydrodynamic lubrication point contact problem in the unsteady state of reciprocating motion is presented. The effects of frequency, stroke length and load on film thickness and pressure variation during one operating cycle are discussed. The general tribological behavior of elastohydrodynamic lubrication during reciprocating motion is explained.

The system of equations of Reynolds, film thickness considering surface deformation and load balance equations are solved using the Newton-Raphson technique with the Gauss-Seidel iteration method. Numerical solutions were performed with a sinusoidal contact surface velocity to simulate reciprocating elastohydrodynamics. The methodology is validated using historical experimental measurements/observations and numerical predictions from other researchers.

The numerical results showed that the change in oil film during a stroke is controlled by both wedge and squeeze effects. When the surface velocity is zero at the stroke end, the squeeze effect is most noticeable. As the frequency increases, the general trend of central and minimum film thickness increases. With the same entraining speed but different stroke lengths, the properties of the oil film differ from one another, with an increase in stroke length leading to a reduction in film thickness. Finally, the numerical results showed that the overall film thickness decreases with increasing load.

General tribological behaviors of elastohydrodynamic lubricating point contact, represented by pressure and film thickness variations over time and profiles, are analyzed under reciprocating motion during one working cycle to show the effects of frequency, stroke length and applied load.

This paper aims to identify the critical project management success factors and analyze those factors to achieve a sustainable construction industry in Bangladesh.

This study identified 41 major problematic factors from the related literature. In this research, a detailed questionnaire survey was conducted among the experts and stakeholders of the construction industry of Bangladesh. The survey was carried out on a Likert scale and ranked the critical factors using the relative importance index (RII). The 41 problematic factors were divided into five group factors and ranked by the RII index to prioritize the factors. Finally, stakeholders' opinions were analyzed with the critical assessed factors, which was a very effective technique to eliminate the risks and uncertain occurrences in the construction industry of Bangladesh.

The factors analysis revealed that cost overrun, traffic jam, low wedges, slow payment for completed works and financial issues of the owner were leading critical factors in construction projects. Moreover, the critical factors are divided into five-factor groups, namely, financial management, monitoring and feedback, competency management, communication and coordination management, and risk management, which exhibit 0.767, 0.720, 0.711, 0.710 and 0.658 RII values. After all, the stakeholders' opinion suggested that implementing modern tools and techniques can help to avoid the critical situation in the construction industry of Bangladesh.

The construction industry of Bangladesh is moving away from stable construction work day by day. Previously, the potential CSFs were discussed unstructured way. Hence, detecting early warning signals in a structured way has become necessary for the building firm's survival.

Though some scattered critical issues are discussed in different literature, the critical issues of the Bangladeshi construction industry were not investigated extensively. Therefore, this study finds out the potential critical issues of the construction industry of Bangladesh to accumulate such harmful construction issues in a single platform so that the construction industry can have an overview of them with the help of innovative technologies.

Agricultural land loss is a severe issue that Australia faces, along with many other countries. Myriad research studies have discussed the reasons for such land loss, including urban sprawl as the main factor and factor's repercussions. However, there is a knowledge gap in understanding the impact of dwelling type on farming land reduction. Also, there is an application gap, particularly in the local context. The purpose of this study is to discover the effect of differing dwelling types (compact and non-compact) in metropolitan areas with a growing population (such as Craigieburn) toward potentially noticeable agricultural land loss.

This paper aims to fill these research and practice gaps through a case study using a mixed methods approach. A quantitative analysis was conducted of housing types, the types' growth and agricultural land area taken up by those different housing types over 18 years. Thematic analysis of policies, strategies, schemes and codes relevant to the case study enabled a better understanding of practice gaps.

The study revealed a significant loss of agricultural land. Separate housing was found to be the main culprit due to the number of houses and the area the houses require, thus exhibiting the lack of practical guidelines to prevent the houses' overdevelopment. The findings enabled the identification of opportunities for better practice through government intervention and potential industry alterations.

Previous literature has primarily explored the issues associated with urban sprawl and the sprawl's unsustainability. This research paper offers a more targeted insight into one of the key factors leading to urban sprawl: the types of dwellings being constructed.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

This study aims to examine the effects of dialect connectedness between the chairman and the chief executive officer (CEO) (DCCC) on the tunneling activities of controlling shareholders.

This study uses abnormal related-party transactions (ARPT) as a proxy for tunneling activities and traces dialects of chairmen and CEOs based on the respective birthplace information. Baseline results are examined using a fixed-effects model. The results remain robust when using the instrumental variable approach, propensity score matching (PSM) technique, changing the measurement of tunneling and Heckman two-step selection model.

The results show that DCCC reduces tunneling activities. This negative association is more pronounced for non-state-owned enterprises and firms whose chairmen and CEOs work in the respective hometowns. DCCC restrains tunneling activities through mechanisms by establishing an informal supervisory effect on CEOs because the CEOs fear reputational damage and strengthening cooperation between chairmen and CEOs. Further analyses suggest that this negative association is more significant when chairmen and CEOs are non-controlling shareholders, but the association is weakened during the coronavirus disease 2019 (COVID-19) crisis.

As dialect is a carrier of culture, this study's results imply that cultural proximity can replace formal mechanisms to enhance corporate governance.

This study aims to assess previously developed Electronic Health Records System (EHRS) implementation models and identify successful models for decision support.

A systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The data sources used were Scopus, PubMed and Google Scholar. The review identified peer-reviewed papers published in the English Language from January 2010 to April 2023, targeting well-defined implementation of EHRS with decision-support capabilities in healthcare. To comprehensively address the research question, we ensured that all potential sources of evidence were considered, and quantitative and qualitative studies reporting primary data and systematic review studies that directly addressed the research question were included in the review. By including these studies in our analysis, we aimed to provide a more thorough and reliable evaluation of the available evidence.

The findings suggest that the success of EHRS implementation is determined by organizational and human factors rather than technical factors alone. Successful implementation is dependent on a suitable implementation framework and management of EHRS. The review identified the capabilities of Clinical Decision Support (CDS) tools as essential in the effectiveness of EHRS in supporting decision-making.

This study contributes to the existing literature on EHRS implementation models and identifies successful models for decision support. The findings can inform future implementations and guide decision-making in healthcare facilities.

This study analyzes whether industry relatedness between a corporate borrower and its group peers significantly affects that firm's borrowing cost.

A regression analysis is run on bank-loan data of a sample of Indonesian companies for 2010–2020. The main variables of interest are the natural logarithms of the borrowing firm's number of affiliates classified within either similar 2- or 4-digit GICS industries, and the Caves weighted index of these firms' related diversification. This index measures how firms in a group are diversified in relation to the borrower. The dependent variable is the all-in credit spread, stated in basis points, over the LIBOR or similar benchmark, as of the loan issuance date.

Findings support the industry-relatedness hypothesis and contradict the risk-reduction hypothesis and show that banks charge lower loan spreads on a borrowing firm that either operates within a similar industry as its affiliate or diversifies into related sectors or industries. Consistent with the co-insurance-effect hypothesis, the results also underline the importance of the parent and first-layer firms as supporting instead of the tunneling vehicles within business groups. These conclusions hold even after segregating the sample and using the loan maturity as the dependent variable.

This study uses a unique diversification measurement based on the borrowing firm's sector or industry, relative to other group members, and offers new insights on business group diversification and bank loan costs.