Search results

This paper aims to reveal how different types of events and top management teams' (TMTs’) cognitive frames affect the generation of breakthrough innovations.

Drawing on the event system theory and upper echelon theory, this study chose a Chinese manufacturing enterprise as the case firm and conducted an exploratory single-case study to unpack how breakthrough innovation generates over time.

By conducting the in-depth case analysis, the study revealed that firms do not produce breakthrough innovation in the catch-up stage and parallel-running stage but achieve it in the leading stage. It also indicated that when facing proactive events in the catch-up stage, TMTs often adopt a contracted lens, being manifested as consistency orientation, less elastic organizational identity and narrower competitive boundaries. In addition, they tend to adopt a contracted lens when facing reactive and proactive events in the parallel-running stage. In the face of reactive and proactive events in the leading stage, they are more inclined to adopt an expanded lens, being manifested as a coexistence orientation, more elastic organizational identity and wider competitive boundaries.

First, by untangling how TMT's cognitive frame functions in breakthrough innovations, this paper provides a micro-foundation for producing breakthrough innovations and deepens the understanding of upper echelon theory by considering the cognitive dimension of TMTs. Second, by teasing out several typical events experienced by the firm, this paper is the first attempt to reveal how events affect the generation of breakthrough innovation. Third, the work extends the application of the event system theory in technological innovation. It also provides insightful implications for promoting breakthrough innovations by considering the role of proactive and reactive events a firm experiences and TMT's perceptions.

This work compares the performance of the three boundary element techniques for solving Helmholtz problems: dual reciprocity, multiple reciprocity and direct interpolation. All techniques transform domain integrals into boundary integrals, despite using different principles to reach this purpose.

Comparisons here performed include the solution of eigenvalue and response by frequency scanning, analyzing many features that are not comprehensively discussed in the literature, as follows: the type of boundary conditions, suitable number of degrees of freedom, modal content, number of primitives in the multiple reciprocity method (MRM) and the requirement of internal interpolation points in techniques that use radial basis functions as dual reciprocity and direct interpolation.

Among the other aspects, this work can conclude that the solution of the eigenvalue and response problems confirmed the reasonable accuracy of the dual reciprocity boundary element method (DRBEM) only for the calculation of the first natural frequencies. Concerning the direct interpolation boundary element method (DIBEM), its interpolation characteristic allows more accessibility for solving more elaborate problems. Despite requiring a greater number of interpolating internal points, the DIBEM has presented higher-quality results for the eigenvalue and response problems. The MRM results were satisfactory in terms of accuracy just for the low range of frequencies; however, the neglected higher-order primitives impact the accuracy of the dynamic response as a whole.

There are safe alternatives for solving engineering stationary dynamic problems using the boundary element method (BEM), but there are no suitable comparisons between these different techniques. This paper presents the particularities and detailed comparisons approaching the accuracy of the three important BEM techniques, aiming at response and frequency evaluation, which are not found in the specialized literature.

This paper aims to investigate the influence of nonuniform gas speed across the build area on the melt pool depth during laser powder bed fusion. This study focuses on whether a nonuniform gas speed is a source of process variation within an individual build.

Parts with many single-track laser scans were printed and characterized in different locations across the build area coupled with corresponding gas speed profile measurements. Cross-sectional melt pool depth, width and area are compared against build location/gas speed profiles, scan direction and laser scan speed.

This study shows that the melt pool depth of single-track laser scans produced on parts are highly variable. Despite this, trends were found showing a reduction in melt pool depth for slow laser scan speeds on the build platform near the inlet nozzle and when the laser scans are parallel to the gas flow direction.

A unique data set of single-track laser scan cross-sectional melt pool measurements and gas speed measurements was generated to assess process variation associated with nonuniform gas speed. Additionally, a novel sample design was used to increase the number of single-track tests per part, which is widely applicable to studying process variation across the build area.

This paper aims to present the fabrication of 6061 aluminum alloy (AA6061) using a promising laser additive manufacturing process, called the laser-foil-printing (LFP) process. The process window of AA6061 in LFP was established to optimize process parameters for the fabrication of high strength, dense and crack-free parts even though AA6061 is challenging for laser additive manufacturing processes due to hot-cracking issues.

The multilayers AA6061 parts were fabricated by LFP to characterize for cracks and porosity. Mechanical properties of the LFP-fabricated AA6061 parts were tested using Vicker’s microhardness and tensile testes. The electron backscattered diffraction (EBSD) technique was used to reveal the grain structure and preferred orientation of AA6061 parts.

The crack-free AA6061 parts with a high relative density of 99.8% were successfully fabricated using the optimal process parameters in LFP. The LFP-fabricated parts exhibited exceptional tensile strength and comparable ductility compared to AA6061 samples fabricated by conventional laser powder bed fusion (LPBF) processes. The EBSD result shows the formation of cracks was correlated with the cooling rate of the melt pool as cracks tended to develop within finer grain structures, which were formed in a shorter solidification time and higher cooling rate.

This study presents the pioneering achievement of fabricating crack-free AA6061 parts using LFP without the necessity of preheating the substrate or mixing nanoparticles into the melt pool during the laser melting. The study includes a comprehensive examination of both the mechanical properties and grain structures, with comparisons made to parts produced through the traditional LPBF method.

This study aims to investigate the fabrication of solid ankle foot orthoses (SAFOs) using fused deposition modeling (FDM) printing technology. It emphasizes cost-effective 3D scanning with the Kinect sensor and conducts a comparative analysis of SAFO durability with varying thicknesses and materials, including polylactic acid (PLA) and carbon fiber-reinforced (PLA-C), to address research gaps from prior studies.

In this study, the methodology comprises key components: data capture using a cost-effective Microsoft Kinect® Xbox 360 scanner to obtain precise leg dimensions for SAFOs. SAFOs are designed using CAD tools with varying thicknesses (3, 4, and 5 mm) while maintaining consistent geometry, allowing controlled thickness impact investigation. Fabrication uses PLA and PLA-C materials via FDM 3D printing, providing insights into material suitability. Mechanical analysis uses dual finite element analysis to assess force–displacement curves and fracture behavior, which were validated through experimental testing.

The results indicate that the precision of the scanned leg dimensions, compared to actual anthropometric data, exhibits a deviation of less than 5%, confirming the accuracy of the cost-effective scanning approach. Additionally, the research identifies optimal thicknesses for SAFOs, recommending a 4 and 5 mm thickness for PLA-C-based SAFOs and an only 5 mm thickness for PLA-based SAFOs. This optimization enhances the overall performance and effectiveness of these orthotic solutions.

This study’s innovation lies in its holistic approach, combining low-cost 3D scanning, 3D printing and computational simulations to optimize SAFO materials and thickness. These findings advance the creation of cost-effective and efficient orthotic solutions.

This paper aims to investigate the influence of scan speed on the corrosion and tribocorrosion features of the CoCrMoW samples fabricated via the selective laser melting (SLM) process.

CoCrMoW samples were produced by SLM at different scan speeds. Produced samples were made via structural surveys (X-ray diffraction examinations and scanning electron microscopic analyses), hardness measurements and electrochemical and tribocorrosion experiments.

Outcomes displayed that the corrosion and tribocorrosion properties of CoCrMoW alloy were significantly influenced by scanning speeds. Also, these properties of the alloy increased with increasing scanning speeds. CoCrMoW samples produced at a laser scan speed of 1,000 mm/s showed the best resistance to corrosion and tribocorrosion. This could be related to the high hardness and low grain structure of the fabricated samples.

This paper may be a practical reference and offers insight into the effect of scanning speeds on the increase of hardness, tribological and corrosion performance of CoCrMoW alloys. This study can help in the further advancement of cobalt-chromium alloy in situ produced by SLM for both electrochemical and tribocorrosion behavior for biomedical applications.

This research aimed to develop an automatic 3D body measurement line generation method that reduces errors induced by diverse body shapes and incomplete scan areas.

Three-dimensional body scan data from the 5th Size Korea database were used. Measurement extraction methods were developed for each measurement; chest girth, underbust girth, armscye girth and neck base girth.

The research showed that the method adopted in this study enhanced the accuracy of the scan measurements for various body shapes and incomplete scan data. The authors verified the accuracy of the developed methods for various body shapes by comparing the scan measurement against manual measurement.

The automatic 3D body measurement line generation algorithms developed for various human body shapes will improve the reliability and accuracy of 3D body scan measurement program. Also. it will be of practical use in human-size-related production processes.

This paper aims to present a methodology for the detection and categorisation of metal powder particles that are partially attached to additively manufactured lattice structures. It proposes a software algorithm to process micro computed tomography (µCT) image data, thereby providing a systematic and formal basis for the design and certification of powder bed fusion lattice structures, as is required for the certification of medical implants.

This paper details the design and development of a software algorithm for the analysis of µCT image data. The algorithm was designed to allow statistical probability of results based on key independent variables. Three data sets with a single unique parameter were input through the algorithm to allow for characterisation and analysis of like data sets.

This paper demonstrates the application of the proposed algorithm with three data sets, presenting a detailed visual rendering derived from the input image data, with the partially attached particles highlighted. Histograms for various geometric attributes are output, and a continuous trend between the three different data sets is highlighted based on the single unique parameter.

This paper presents a novel methodology for non-destructive algorithmic detection and categorisation of partially attached metal powder particles, of which no formal methods exist. This material is available to download as a part of a provided GitHub repository.

The purpose of this paper is to determine the ultra-high cycle fatigue behavior and ultra-slow crack propagation behavior of selective laser melting (SLM) AlSi7Mg alloy under as-built conditions.

Constant amplitude and two-step variable amplitude fatigue tests were carried out using ultrasonic fatigue equipment. The fracture surface of the failure specimen was quantitatively analyzed by scanning electron microscope (SEM).

The results show that the competition of surface and interior crack initiation modes leads to a duplex S–N curve. Both manufacturing defects (such as the lack of fusion) and inclusions can act as initially fatal fatigue microcracks, and the fatigue sensitivity level decreases with the location, size and type of the maximum defects.

The research results play a certain role in understanding the ultra-high cycle fatigue behavior of additive manufacturing aluminum alloys. It can provide reference for improving the process parameters of SLM technology.

This study aims to explore how to overcome and address the loss of exploratory innovation, thereby achieving greater success in exploratory innovation. This phenomenon of loss occurs when enterprises decrease their investment in and engagement with exploratory innovation, ultimately leading to an insufficient amount of such innovation efforts. Drawing on dynamic capabilities, this study investigates the relationship between organizational foresight and exploratory innovation and examines the moderating role of breakthrough orientation/financial orientation.

This study used survey data collected from 296 Chinese high-tech companies in multiple industries and sectors.

The evidence produced by this study reveals that three elements of organizational foresight (i.e. environmental scanning capabilities, strategic selection capabilities and integrating capabilities) positively influence exploratory innovation. Furthermore, this positive effect is strengthened in the context of a high-breakthrough orientation. Moreover, the relationships among environmental scanning capabilities, strategic selection capabilities and exploratory innovation become weaker as an enterprise’s financial orientation increases, whereas a strong financial orientation does not affect the relationship between integrating capabilities and exploratory innovation.

Ambidexterity is key to successful enterprise innovation. Compared with exploitative innovation, it is by no means easy to engage in exploratory innovation, which is especially important in high-tech companies. While the loss of exploratory innovation has been observed, few empirical studies have explored ways to promote exploratory innovation more effectively. A key research implication of this study pertains to the role of organizational foresight in the improvement of exploratory innovation in the context of high-tech companies.

This paper contributes to the broader literature on exploratory innovation and organizational foresight and provides practical guidance for high-tech companies regarding ways of avoiding the loss of exploratory innovation and becoming more successful at exploratory innovation.