Search results

This study aims to focus on the surface mount technology (SMT) mass production process of Sn-9Zn-2.5Bi-1.5In solder. It explores it with some components that will provide theoretical support for the industrial SMT application of Sn-Zn solder.

This study evaluates the properties of solder pastes and selects a more appropriate reflow parameter by comparing the microstructure of solder joints with different reflow soldering profile parameters. The aim is to provide an economical and reliable process for SMT production in the industry.

Solder paste wettability and solder ball testing in a nitrogen environment with an oxygen content of 3,000 ppm meet the requirements of industrial production. The printing performance of the solder paste is good and can achieve a printing rate of 100–160 mm/s. When soldering with a traditional stepped reflow soldering profile, air bubbles are generated on the surface of the solder joint, and there are many voids and defects in the solder joint. A linear reflow soldering profile reduces the residence time below the melting point of the solder paste (approximately 110 s). This reduces the time the zinc is oxidized, reducing solder joint defects. The joint strength of tin-zinc joints soldered with the optimized reflow parameters is close to that of Sn-58Bi and SAC305, with high joint strength.

This study attempts to industrialize the application of Sn-Zn solder and solves the problem that Sn-Zn solder paste is prone to be oxidized in the application and obtains the SMT process parameters suitable for Sn-9Zn-2.5Bi-1.5In solder.

This study aims to investigate the thermal fracture mechanism of moisture-preconditioned SAC305 ball grid array (BGA) solder joints subjected to multiple reflow and thermal cycling.

The BGA package samples are subjected to JEDEC Level 1 accelerated moisture treatment (85 °C/85%RH/168 h) with five times reflow at 270 °C. This is followed by multiple thermal cycling from 0 °C to 100 °C for 40 min per cycle, per IPC-7351B standards. For fracture investigation, the cross-sections of the samples are examined and analysed using the dye-and-pry technique and backscattered scanning electron microscopy. The packages' microstructures are characterized using an energy-dispersive X-ray spectroscopy approach. Also, the package assembly is investigated using the Darveaux numerical simulation method.

The study found that critical strain density is exhibited at the component pad/solder interface of the solder joint located at the most distant point from the axes of symmetry of the package assembly. The fracture mechanism is a crack fracture formed at the solder's exterior edges and grows across the joint's transverse section. It was established that Au content in the formed intermetallic compound greatly impacts fracture growth in the solder joint interface, with a composition above 5 Wt.% Au regarded as an unsafe level for reliability. The elongation of the crack is aided by the brittle nature of the Au-Sn interface through which the crack propagates. It is inferred that refining the solder matrix elemental compound can strengthen and improve the reliability of solder joints.

Inspection lead time and additional manufacturing expenses spent on investigating reliability issues in BGA solder joints can be reduced using the study's findings on understanding the solder joint fracture mechanism.

Limited studies exist on the thermal fracture mechanism of moisture-preconditioned BGA solder joints exposed to both multiple reflow and thermal cycling. This study applied both numerical and experimental techniques to examine the reliability issue.

This case study sought to investigate the relationship between pre-service teachers’ participation in designing and delivering one-on-one literacy intervention lessons to beginning readers and their own evolving self-efficacy in literacy instruction.

The study was embedded within a 4000-level course in the elementary education major where pre-service teachers learn to administer, analyze and interpret a variety of literacy assessments. Based on the results of these assessments, pre-service teachers designed and implemented literacy lessons (twice a week, 30-min sessions) that addressed the beginning readers' specific instructional needs. Through collecting pre/post data with their first-grade intervention students, and participating in reflective “check-ins” (surveys, a focus group and end-of-course written reflection), a portrait of increased pre-service teacher self-efficacy in literacy instruction comes into focus.

The data showed, primarily through the thematic analysis of qualitative data, that the experience of conducting a one-on-one intervention with a striving reader impacted pre-service teachers’ self-efficacy positively.

The methodology of this study was limited by the small sample size and the low participant response rate on the quantitative survey measure.

This paper highlights one aspect in which clinically-rich field experiences can make a difference in the literacy instruction self-efficacy of pre-service teachers.

This study adds to the support for authentic instructional applications of course content in educator preparation programs, specifically in Professional Development School (partner school system) contexts. The aspect of observing and measuring intervention student progress was one lens through which pre-service teachers viewed their efficacy. Further investigations focusing on other assessment-instruction cycles could provide additional insights.

The purpose of this article is to prepare graphene/polyimide composite materials for use as bearing cage materials, improving the friction and wear performance of bearing cages.

The oil absorption and discharge tests were conducted to evaluate the oil content properties of the materials, while the mechanical properties were analyzed through cross-sectional morphology examination. Investigation into the tribological behavior and wear mechanisms encompassed characterization and analysis of wear trace morphology in PPI-based materials. Consequently, the influence of varied graphene nanoplatelets (GN) concentrations on the oil content, mechanical and tribological properties of PPI-based materials was elucidated.

The composites exhibit excellent oil-containing properties due to the increased porosity of PPI-GN composites. The robust formation of covalent bonds between GN and PPI amplifies the adhesive potency of the PPI-GN composites, thereby inducing a substantial enhancement in impact strength. Notably, the PPI-GN composites showed enhanced lubrication properties compared to PPI, which was particularly evident at a GN content of 0.5 Wt.%, as evidenced by the minimization of the average coefficient of friction and the width of the abrasion marks.

This paper includes implications for elucidating the wear mechanism of the polyimide composites under frictional wear conditions and then to guide the optimization of oil content and tribological properties of polyimide bearing cage materials.

In this paper, homogeneously dispersed PPI-GN composites were effectively synthesized by introducing GN into a polyimide matrix through in situ polymerization, and the lubrication mechanism of the PPI composites was compared with that of the PPI-GN composites to illustrate the composites’ superiority.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0415

This paper aims to provide a comprehensive knowledge structure for environmental accounting (EA) research by identifying research hotspots and frontiers and suggesting future trends for scholarly investigation.

Using the bibliometric method, the paper analyzed 321 academic articles and reviews in international journals from the Scopus database. Science mapping, including strategic diagrams, network analysis and thematic maps, was used to analyze the evolution of topics and to recommend future research trends.

EA research is an emerging trend. This study presents the landscape of EA research by constructing the “synthesis house of knowledge” in EA. Significant EA research areas were identified and future research trends were suggested based on the results.

This paper provides insights into the current state of EA research and identifies potential future research trends that can help scholars and experts develop and stimulate further advancement of the research in this field.

Results may motivate policymakers and government agencies to formulate regulations to enforce appropriate corporate environmental strategies to better manage environmental costs and reduce community environmental impact.

The study provides an intellectually structured literature review of the EA research field; identifies the main themes through the innovative use of network analysis, strategic diagrams and thematic maps; highlights research gaps; and offers potential research questions and suggestions for future research. The novelty of this paper lies in the “synthesis house of knowledge” in EA and the research gaps and potential and specific research questions constructed from the findings.

The impact of rolling on the performance of micro arc oxidation (MAO) coatings on ZM5 alloy has been underreported. The purpose of this study is to explore the correlation between rolling and the failure mechanism of MAO coatings in greater depth.

The influence of rolling on the corrosion and wear properties of MAO coating was investigated by phase structure, bond strength test (initial bond strength and wet adhesion), electrochemical impedance spectroscopy and wear test. The change of the surface electrochemical properties was studied by first principles analysis.

The results showed that the MAO coating on rolled alloy had better corrosion and wear resistance compared to cast alloy, although the structure and component content of two kinds of MAO coating are nearly identical. The difference in interface bonding between MAO coating and Mg substrate is the primary factor contributing to the disparity in performance between the two types of samples. Finally, the impact of the rolling process on MAO coating properties is explained through first-principle calculation.

A comprehensive explanation of the impact of the rolling process on MAO coating properties will provide substantial support for enhancing the application of Mg alloy anticorrosion.

Wire-arc-based additive manufacturing (WAAM) is a promising technology for the efficient and economical fabrication of medium-large components. However, the anisotropic behavior of the multilayered WAAM-fabricated components remains a challenging problem.

The purpose of this paper is to conduct a comprehensive study of the grain morphology, crystallographic orientation and texture in three regions of the WAAM printed component. Furthermore, the interdependence of the grain morphology in different regions of the fabricated component with their mechanical and tribological properties was established.

The electron back-scattered diffraction analysis of the top and bottom regions revealed fine recrystallized grains, whereas the middle regions acquired columnar grains with an average size of approximately 8.980 µm. The analysis revealed a higher misorientation angle and an intense crystallographic texture in the upper and lower regions. The investigations found a higher microhardness value of 168.93 ± 1.71 HV with superior wear resistance in the bottom region. The quantitative evaluation of the residual stress detected higher compressive stress in the upper regions. Evidence for comparable ultimate tensile strength and greater elongation (%) compared to its wrought counterpart has been observed.

The study found a good correlation between the grain morphology in different regions of the WAAM-fabricated component and their mechanical and wear properties. The Hall–Petch relationship also established good agreement between the grain morphology and tensile test results. Improved ductility compared to its wrought counterpart was observed. The anisotropy exists with improved mechanical properties along the longitudinal direction. Moreover, cylindrical components have superior tribological properties compared with cuboidal components.

This study aims to investigate the pragmatic issues on the radical call for the establishment of an external Shariah auditor (ESA) in the governance framework of Islamic banks (IBs).

From 11 well-established Malaysian IBs, 16 internal auditors were interviewed to provide an in-depth understanding on how ESA can provide greater assurance to stakeholders in Malaysian IBs.

This study reported mixed acceptance from internal auditors on the proposed additional governance layer to be undertaken by the ESA. Generally, internal auditors reluctantly agreed that Shariah auditing by the ESA would enhance the quality of Shariah assurance but maintain several practical concerns regarding lack of guidelines on Shariah auditing, the additional cost to be borne by IBs and the possible tensions between the ESA and Shariah board (SB) amid the diverse Shariah interpretations available for experts in the field.

The critical point on the manifestation of an ESA in the contemporary IB practice brought by this study highlights the need for regulation and policy promulgation that embrace a comprehensive approach to Shariah audit process within the religio-ethical dogma of Islamic banking and the pragmatic approach to banking.

This study provides evidence on the expected role and competency of an ESA and explores the implications produced by its implementation in Malaysian IBs. This study also clarifies how IBs should delineate the role of Shariah assurance from SB to ESA.

In typical model-based calibration, linearization errors are derived inevitably, and non-negligible negative impact will be induced on the identification results if the rotational kinematic errors are not small enough or the lengths of links are too long, which is common in the industrial cases. Thus, an accurate two-step kinematic calibration method minimizing the linearization errors is presented for a six-DoF serial robot to improve the calibration accuracy.

The negative impact of linearization on identification accuracy is minimized by removing the responsible linearized kinematic errors from the complete kinematic error model. Accordingly, the identification results of the dimension-reduced new model are accurate but not complete, so the complete kinematic error model, which achieves high identification accuracy of the rest of the error parameters, is combined with this new model to create a two-step calibration procedure capable of highly accurate identification of all the kinematic errors.

The proportions of linearization errors in measured pose errors are quantified and found to be non-negligible with the increase of rotational kinematic errors. Thus, negative impacts of linearization errors are analyzed quantitatively in different cases, providing the basis for allowed kinematic errors in the new model. Much more accurate results were obtained by using the new two-step calibration method, according to a comparison with the typical methods.

This new method achieves high accuracy with no compromise on completeness, is easy to operate and is consistent with the typical method because the second step with the new model is conveniently combined without changing the sensors or measurement instrument setup.

This study aims to investigate the adoption of the United Nations’ Sustainable Development Goals (SDGs) as the new performance perspective in cities. It also aims to understand how accounting for SDGs begins in city administrations by following Power’s (2015) fourfold development schema composed of policy object formation, object elaboration, activity orchestration and practice stabilization.

Focusing on a network of cities coordinated by the Finnish local government association, we analyzed the six largest cities in Finland employing a holistic multiple case study strategy. Our data consisted of Voluntary Local Reviews (VLRs), city strategies, budget plans, financial statements, as well as results of participant observations and semi-structured interviews with key individuals involved in accounting for SDGs.

We unveiled the SDG framework as an interpretive scheme through which cities glocalized sustainable development as a novel, simultaneously global and local, performance object. Integration of the new accounts in city management is necessary for these accounts to take life in steering the actions. By creating meaningful alignment and the ability to impact managerial practices, SDGs and VLRs have the potential to influence local actions. Our results indicate further institutionalization progress of sustainability as a performance object through SDG-focused work.

While prior research has focused mainly on general factors influencing the integration of the sustainability agenda, this study provides a novel perspective by capturing the process and demonstrating empirically how new accounts on SDGs are introduced and deployed in the strategic planning and management of local governments.