Search results

The purpose of this paper through the redundant monitoring unit reflecting the real-time temperature change of the array, an adaptive refresh circuit based on temperature is designed.

This paper proposed a circuit design for temperature-adaptive refresh with a fixed refresh frequency of traditional memory, high refresh power consumption at low temperature and low refresh frequency at high temperature.

Adding a metal oxide semiconductor (MOS) redundancy monitoring unit consistent with the storage unit to the storage bank can monitor the temperature change of the storage bank in real time, so that temperature-based memory adaptive refresh can be implemented.

According to the characteristics that the data holding time of dynamic random access memory storage unit decreases with the increase of temperature, a MOS redundant monitoring unit which is consistent with the storage unit is added to the storage array with the 2T storage unit as the core.

The purpose of this paper is to provide a data framework to support the incremental aggregation of, and an effective data refresh model to maintain the data consistency in, an aggregated centralized database.

It is based on a case study of enterprise distributed databases aggregation for Taiwan's National Immunization Information System (NIIS). Selective data replication aggregated the distributed databases to the central database. The data refresh model assumed heterogeneous aggregation activity within the distributed database systems. The algorithm of the data refresh model followed a lazy replication scheme but update transactions were only allowed on the distributed databases.

It was found that the approach to implement the data refreshment for the aggregation of heterogeneous distributed databases can be more effectively achieved through the design of a refresh algorithm and standardization of message exchange between distributed and central databases.

The transaction records are stored and transferred in standardized XML format. It is more time‐consuming in record transformation and interpretation but it does have higher transportability and compatibility over different platforms in data refreshment with equal performance. The distributed database designer should manage these issues as well assure the quality.

The data system model presented in this paper may be applied to other similar implementations because its approach is not restricted to a specific database management system and it uses standardized XML message for transaction exchange.

This paper aims to research literature to describe the business processes used when planning IT infrastructure refreshes.

The paper uses analytical hierarchical process (AHP) and pairwise comparisons to model and quantify the decision process for IT infrastructure refreshes.

The research found that most companies keep their refresh processes private and very little academic research is available on this topic. While supportability, manageability, compatibility, cost, and scalability are important factors to large organizations, performance and availability of the systems are important for smaller organizations.

AHP was not ever used to evaluate the refresh planning. The paper demonstrates that it would be a very useful tool.

The purpose of this paper is to determine the classic (static) and dynamic sensory profile of different bottled mineral water samples, and to evaluate the consumer’s liking of the products.

Classic quantitative descriptive analysis (QDA) and temporal dominance of sensations (TDS) were applied to four brands of bottled mineral water and the liking of the products was evaluated by consumers.

The dissolved mineral concentration is highly correlated to the liking and influences the sensory profile of the samples in a substantial way. The higher the mineral content, the lowest is the liking. Refreshing, residual plastic taste, musty, metallic taste, medicine taste and viscosity were relevant attributes to the samples differentiation through the static evaluation, while refreshing and viscosity were dominant in the dynamic monitoring. Some information might have been lost by the nature of the TDS method, based on dominance concept. Sweet taste contributed positively and musty taste negatively to the acceptance.

This paper demonstrated that TDS can be used as a complementary tool to the QDA, contributing to a deeper comprehension of the differences among samples, even in products with low differences, such as bottled mineral water.

The tobacco industry consistently opposes measures that would limit their marketing, but provides little empirical evidence to support its position. This paper aims to test claims that pictorial health warnings on tobacco products would be no more effective than text‐only warnings.

Three studies used face‐to‐face interviews with smokers and non‐smokers to compare pictorial and text‐only warnings. Two studies used semantic differential scales to estimate cognitive and affective responses to pictorial and text‐only warnings, and the Juster Scale to provide behavioural estimates. The final study used best worst scaling to compare paired pictorial and text‐only warnings.

Images featuring medical and social images elicited stronger affective, cognitive and behavioural responses than a control, text‐only message. Comparisons of refreshed text and pictorial warnings found the latter elicited stronger reactions while the former produced similar results to the control. Updating text warnings did not render these more effective; however, adding an image to an existing text warning made this more effective than the control.

Arguments advanced by the tobacco industry need empirical analysis to assess their validity.

This study provides evidence that pictorial health warnings are more effective than text warnings and suggests that refreshing the text used in warning labels, the alternative promoted by the tobacco industry, would be less effective than introducing pictorial warnings.

This is the first comparison of pictorial and refreshed text warnings; the findings challenge the tobacco industry's position on tobacco warning labels and contradict arguments used to oppose the introduction of pictorial warning labels.

Various approaches have been made to alter the vibration sensing properties of zinc oxide (ZnO) films to achieve high sensitivity. This paper aims to report the experimental study of the fabrication of precursor molar ratio concentration varied ZnO nanostructures grown on rigid substrates using the refresh hydrothermal method. The effect of these fabricated ZnO nanostructures-based vibration sensors was experimentally investigated using a vibration sensing setup.

ZnO nanostructures have been grown using low temperature assisted refresh hydrothermal method with different precursor molar concentrations 0.025 M (R1), 0.075 M (R2) and 0.125 M (R3). Poly 3,4-ethylenedioxythiophene polystyrene sulfonate, a p-type material is spun coated on the grown ZnO nanostructures. Structural analysis reveals the increased intensity of the (002) plane and better c-axis orientation of the R2 and R3 sample comparatively. Morphological examination shows the changes in the grown nanostructures upon increasing the precursor molar concentration. The optical band gap value decreases from 3.11 eV to 3.08 eV as the precursor molar concentration is increased. Photoconductivity study confirms the formation of a p-n junction with less turn-on voltage for all the fabricated devices. A less internal resistance of 0.37 kΩ was obtained from Nyquist analysis for R2 compared with the other two fabricated samples. Vibration testing experimentation showed an improved output voltage of the R2 sample (2.61 V at 9 Hz resonant frequency and 2.90 V for 1 g acceleration) comparatively. This also gave an increased sensitivity of 4.68 V/g confirming its better performance when compared to the other fabricated two samples.

Photoconductivity study confirms the formation of a p-n junction with less turn-on voltage for all the fabricated devices. A less internal resistance of 0.37 kΩ was calculated from the Nyquist plot. Vibration testing experimentation proves an increased sensitivity of 4.68 V/g confirming its better performance when compared to the other fabricated two samples.

Vibration testing experimentation proves an increased sensitivity of 4.68 V/g for R2 confirming its better performance when compared to the other fabricated two samples.

The digital contents (d-contents) are vulnerable to various threats either natural or manmade. Digital preservation is the plethora of a wide array of strategies necessary for the long-term preservation of digital objects. This study was carried out to assess the digital preservation practices for information resources in university libraries of Pakistan.

A quantitative survey based on a structured questionnaire was carried out to conduct the study. The questionnaire containing two sets of strategies (general and technical) was distributed amongst the whole population and received 90% response rate.

Overall, progressive implementation of general digital preservation practices was noted in these libraries like checking the digital collections for viruses, keeping the digital media in fire/water/theft proof locations, restricting unauthorized access, maintaining ideal humidity and temperature, and checking the digital media for functionality. Amongst the technical practices, only replication was in practice at a progressive rate, followed by metadata recording and media refreshing that was sometimes practiced in these libraries. The other technical practices were rarely or never practiced in these libraries. Significant variances in general and technical digital preservation practices were noted based on their physical locations (regional distribution).

The study contributes a comprehensive set of digital preservation practices divided into general and technical types to conduct similar studies in other parts of the world.

The findings stress the need for national and institutional policies, funding streams and skill enhancement of library staff.

The study fills the literature gap and contributes a comprehensive set of digital preservation practices divided into general and technical types to conduct similar studies in other parts of the world.

The peer-review history for this article is available at: https://publons.com/publon/10.1108/OIR-02-2023-0074

Although the computer world currently seems to favor color displays with screen images only about nine inches wide, such displays are not suitable for many library applications. Computer users who need to view periodicals, photographs or video materials require more detail on the screen than ordinary small color monitors can provide.

The purpose of this paper is to investigate the polyamide 12 (PA12) powder properties deterioration in the laser sintering (LS) process and propose a methodology for more efficient powder recycling. The main goals are: to recommend a level of input PA2200 powder properties which could guarantee acceptable part quality in the LS process; and selection of the refresh rate in order to minimise the consumption of fresh material.

The paper analyses the LS processing conditions and current recycling practices in relation to the deterioration or ageing of the PA12‐based powders. Samples of new and recycled grades of PA2200 powder were artificially aged in a temperature‐controlled oven and then tested using melt flow rate (MFR) indexer. Also, un‐sintered powder samples collected from different locations within various builds, and different LS machines (EOSINT P700 and Sinterstation^® 2500 HiQ) were tested.

The powder exposed at higher temperature and longer time experiences a much higher deterioration rate. The temperature and the time at which the un‐sintered material was exposed are the most influential parameters for the powder aging. It was confirmed that the MFR index is a very sensitive indicator of the changes in the powder properties and provides a relatively fast and inexpensive method of measuring the rate of the powder degradation because of the LS process. The powder located in the periphery and the top of a build has a higher MFR and therefore is less deteriorated. In contrast, powder located in the centre, or in the bottom of a long build has much lower MFR and therefore is less usable.

Based on the findings, a methodology for powder recycling is proposed. It allows a better control of the input material properties, a consistent quality of the fabricated parts, and more efficient use of the LS material.

The paper provides some useful information for the properties deterioration of PA12‐based powders (PA2200) in relation to the temperature and time at which the material is exposed in the LS.