Search results

This study aims to develop an experimentally validated three-dimensional numerical model for predicting different flow patterns produced with a gas dynamic virtual nozzle (GDVN).

The physical model is posed in the mixture formulation and copes with the unsteady, incompressible, isothermal, Newtonian, low turbulent two-phase flow. The computational fluid dynamics numerical solution is based on the half-space finite volume discretisation. The geo-reconstruct volume-of-fluid scheme tracks the interphase boundary between the gas and the liquid. To ensure numerical stability in the transition regime and adequately account for turbulent behaviour, the k-ω shear stress transport turbulence model is used. The model is validated by comparison with the experimental measurements on a vertical, downward-positioned GDVN configuration. Three different combinations of air and water volumetric flow rates have been solved numerically in the range of Reynolds numbers for airflow 1,009–2,596 and water 61–133, respectively, at Weber numbers 1.2–6.2.

The half-space symmetry allows the numerical reconstruction of the dripping, jetting and indication of the whipping mode. The kinetic energy transfer from the gas to the liquid is analysed, and locations with locally increased gas kinetic energy are observed. The calculated jet shapes reasonably well match the experimentally obtained high-speed camera videos.

The model is used for the virtual studies of new GDVN nozzle designs and optimisation of their operation.

To the best of the authors’ knowledge, the developed model numerically reconstructs all three GDVN flow regimes for the first time.

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

Present for more than 20 years, 3D food printing (3DFP) technology has not experienced the same widespread adoption as its non-food counterparts. It is believed that relevant business models are crucial for its expansion. The purpose of this study is to identify the dominant prototypical business models and patterns in the 3DFP industry. The knowledge gained could be used to provide directions for business model innovation in this industry.

The authors established a business model framework and used it to analyse the identified 3DFP manufacturers. The authors qualitatively identified the market’s prototypical business models and used agglomerative hierarchical clustering to extract further patterns.

All identified 3DFP businesses use the prototypical business model of selling ownership of physical assets, with some variations. Low-cost 3D food printers for private usage and dedicated 3D food printers for small-scale food producers are the two primary patterns identified. Furthermore, several benefits of 3DFP technology are not being used, and the identified manufacturers are barely present in high-revenue markets, which prevents them from driving technological innovation forward.

The extracted patterns can be used by the companies within the 3DFP industry and even in other additive manufacturing segments to reflect upon, refine or renew their business model. Some directions for business model innovation in this industry are provided.

To the best of the authors’ knowledge, this is the first quantitative study to give an account of the current 3DFP business models and their possible evolution. This study also contributes to the business model patterns methodological development.

The aim was not to perform a systematic review but firstly to search in PubMed, Science Direct, Scopus and Web of Science databases on the papers published in the last five years using tools for reviewing the statement of preferred information item for systematic reviews without focusing on a randomized analysis and secondly to perform a bibliometric analysis on the properties of films and coatings added of tocopherol for food packaging.

On January 24, 2022, information was sought on the properties of films and coatings added of tocopherol for use as food packaging published in PubMed, Science Direct, Scopus and Web of Science databases. Further analysis was performed using bibliometric indicators with the VOSviewer tool.

The searches returned 33 studies concerning the properties of films and coatings added of tocopherol for food packaging, which were analyzed together for a better understanding of the results. Data analysis using the VOSviewer tool allowed a better visualization and exploration of these words and the development of maps that showed the main links between the publications.

In the area of food science and technology, the development of polymers capable of promoting the extension of the shelf life of food products is sought, so the knowledge of the properties is vital for this research area since combining a biodegradable polymeric material with a natural antioxidant active is of great interest for modern society since they associate environmental preservation with food preservation.

This scientific article aims to evaluate the efficacy of the drug Doxorubicin for treating hepatocellular carcinoma (HCC) in Egypt. The study analyzes data from patients referred to a multi-disciplinary consultation at the National Cancer Institute, Cairo University. The study includes 40 intermediate-stage HCC patients who underwent treatment with either Doxorubicin-Lipiodol or Doxorubicin-loaded drug-eluting beads-trans-arterial chemoembolization (DEB-TACE).

Patients referred to a multi-disciplinary consultation at the National Cancer Institute, Cairo University with a possible diagnosis of HCC in the intermediate stage were eligible for the study.

The study finds that the plasma peak concentration of Doxorubicin is significantly higher in patients treated with Lipiodol compared to those treated with DEB-TACE. The median plasma peak concentration of patients treated with Lipiodol was significantly higher 424 (202.5–731) than the peak level of patients treated with beads 84.95 (26.6–156.5) with p-value = 0.036. However, there is no significant difference in other pharmacokinetic parameters between the two treatment groups. The research article also investigates the genetic polymorphisms in HCC patients treated with Doxorubicin-Lipiodol and Doxorubicin-loaded DEB-TACE. It identifies a significant association between the ABCB1 gene (C3435T) and the concentration of Doxorubicin in plasma. Patients with the CCand computed tomography (CT) genotypes of ABCB1 have higher concentrations of Doxorubicin compared to those with the TT genotype. Furthermore, the study examines the progression-free survival rates and tumour response in the two treatment groups. It demonstrates that DEB-TACE patients have a higher progression-free survival rate compared to cTACE patients. DEB-TACE also leads to better tumour regression.

The current study helps to increase the understanding of the genetic factors that may contribute to HCC susceptibility in the Egyptian population. However, it is essential to consider that genetic polymorphism is just one aspect of HCC risk, and other factors such as environment, lifestyle and viral infections also play crucial roles. Further research is needed to elucidate the complex interactions between genetic and environmental factors in HCC development among Egyptians.

This study examines the osteoconductive and healing capabilities of locally implanted synthetic hydroxyapatite (sHAp) derived from eggshells in the central incisor sockets of rats.

Toxicity experiments were conducted in vitro and in vivo, to testify the safety dosage of sHAp. Around 24 mature male Sprague–Dawley (SD) rats had their upper central incisors extracted. The rats were placed into three groups of eight rats each: Group 1: the sockets of extracted central incisors were left unfilled (control), Group 2: filled up with commercially available hydroxyapatite (HAp) and Group 3: implanted with sHAp locally retrieved from eggshells. After extraction, four rats from each group were sacrificed at 2nd and 4th weeks. Maxillary tissue sections were obtained and stained with hematoxylin and eosin (H&E) and Masson’s trichome (MT) staining. Anti-osteocalcin (OCN) and proliferating cell nuclear antigen (PCNA) were used primary antibodies for immunohistochemistry (IHC) special labeling.

The results showed that the locally implanted sHAp was non-toxic and safe in cell lines (human osteoblast and fibroblast) and animals. Histological analysis of H&E, MT and IHC showed that the sockets treated with locally implanted sHAp from eggshells were filled with new bone tissue of comparable thickness to other groups.

This unique technique uses locally implanted eggshell-derived sHAp with osteoconductive characteristics. In an in vivo model, sHAps increased OCN and PCNA expression to improve bone repair.

This paper aims to analyze the ethical responses of the fashion industry to the first wave of the COVID-19 pandemic when the entire world was shocked by the rapid spread of the virus. The authors describe lessons from emergency ethics of care in the fashion industry during the initial months of COVID-19, which can assist fashion managers in improving ethical decisions in future operations.

Rapid qualitative research methods were employed by conducting real-time, in-depth interviews with key informants from multinational fashion companies operating in Spain, a severely affected region. A content analysis of news articles published during the first months of 2020 was conducted.

Five critical disruptions in the fashion industry were identified: (1) changes in public needs, (2) transportation and distribution backlogs, (3) defective and counterfeit supplies, (4) stakeholder relationships at stake and (5) managers' coping challenges. Additionally, five business survival responses with a strong ethics of care component were identified, implemented by some fashion companies to mitigate the damage: (1) adapting production for public well-being, (2) enhancing the flexibility of logistic networks, (3) emphasizing quality and innovation, (4) reinventing stakeholder collaborations and (5) practicing responsible leadership.

Despite the well-documented controversies surrounding unethical practices within the fashion industry, even during COVID-19, our findings inform managers of the potential and capability of fashion companies to operate more responsibly. The lessons learned can guide fashion companies' operations in a post-pandemic society. Furthermore, they can address other grand challenges, such as natural disasters, geopolitical conflicts and climate change.

The internationalization of business has grown the production value chains and created performance challenges for industrial production. Industry 4.0, the digital transformation of industrial processes, promises to deliver performance improvements through smart functionalities. This study investigates how digital transformation translates to performance gain by adopting a systems perspective to drive smartness.

This study uses qualitative research to collect data on the lived experiences of digital transformation practitioners for theory development. It uses semi-structured interviews with industry experts and applies the Gioia methodology for analysis.

The study determined that enterprise smartness is an organizational capability developed by digital transformation, it is a function of integration and the enabler of organizational performance gains in the Industry 4.0 context. The study determined that performance gains are experienced in productivity, sustainability, safety and customer experience, which represents performance metrics for Industry 4.0.

This study contributes a model that inserts smartness in the linkage between digital transformation and organizational outcomes to the digital transformation and production management literature.

The study indicates that digital transformation programs should focus on developing smartness rather than technology implementations, which must be considered an enabling activity.

Existing studies recognized the positive impact of technology on performance in industrial production. The study addresses a missing link in the Industry 4.0 value creation process. It adopts a systems perspective to establish the role of smartness in translating technology use to performance outcomes. Smart capabilities have been the critical missing link in the literature on harnessing digital transformation in organizations. The study advances theory development by contributing an Industry 4.0 value model that establishes a link between digital technologies, smartness and organizational performance.

In the developing field of nano-materials synthesis, copper oxide nanoparticles (NPs) are deemed to be one of the most significant transition metal oxides because of their intriguing characteristics. Its synthesis employing green chemistry principles has become a key source for next-generation antibiotics attributed to its features such as environmental friendliness, ease of use and affordability. Because they are more environmentally benign, plants have been employed to create metallic NPs. These plant extracts serve as capping, stabilising or hydrolytic agents and enable a regulated synthesis as well.

Organic chemical solvents are harmful and entail intense conditions during nanoparticle synthesis. The copper oxide NPs (CuO-NPs) synthesised by employing the green chemistry principle showed potential antitumor properties. Green synthesised CuO-NPs are regarded to be a strong contender for applications in the pharmacological, biomedical and environmental fields.

The aim of this study is to evaluate the anticancer potential of CuO-NPs plant extracts to isolate and characterise the active anticancer principles as well as to yield more effective, affordable, and safer cancer therapies.

This review article highlights the copper oxide nanoparticle's biomedical applications such as anticancer, antimicrobial, dental and drug delivery properties, future research perspectives and direction are also discussed.

The purpose of this study is to describe the design and validation of a three-dimensional (3D)-printed phantom of a uterus to support the development of uterine balloon tamponade devices conceived to stop post-partum haemorrhages (PPHs).

The phantom 3D model is generated by analysing the main requirements for validating uterine balloon tamponade devices. A modular approach is implemented to guarantee that the phantom allows testing these devices under multiple working conditions. Once finalised the design, the phantom effectiveness is validated experimentally.

The modular phantom allows performing the required measurements for testing the performance of devices designed to stop PPH.

PPH is the leading obstetric cause of maternal death worldwide, mainly in low- and middle-income countries. The proposed phantom could speed up and optimise the design and validation of devices for PPH treatment, reducing the maternal mortality ratio.

To the best of the authors’ knowledge, the 3D-printed phantom represents the first example of a modular, flexible and transparent uterus model. It can be used to validate and perform usability tests of medical devices.