Search results

This paper investigates school library services in the digital age for students with dyslexia and explores the impact of current library services on students’ learning.

A qualitative study with semi-structured interviews was designed according to the LAFE (Look and listen, Assistance and accessibility, Format and fit, and Environment) framework for learners with dyslexia and the 5E instructional model and conducted with 11 school librarians.

Results indicated that participants lacked knowledge of dyslexia for appropriate library services. Awareness, IT skills, school administration, funding and parental attitudes would influence the library’s tailored services to dyslexic children, despite the rich resources in these participants’ libraries, including paperbacks, digital resources and electronic devices. Adaptations are necessary to provide accessible services, especially by applying digital technologies, and school libraries can positively impact students’ reading interests, promote knowledge inquiry and strengthen information literacy skills.

While students with dyslexia spend significant time in schools, limited studies focus on school library services in the digital age, especially in Asia. This study fills the gap by systematically exploring the issue with the 5E instructional model.

Construction activities conducted in urban areas are often a source of significant noise disturbances, which cause psychological and health issues for residents as well as long-term auditory impairments for construction workers. The limited effectiveness of passive noise control measures due to the close proximity of the construction site to surrounding neighborhoods often results in complaints and eventually lawsuits. These can then lead to delays and cost overruns for the construction projects.

The paper proposes a novel approach to integrating construction noise as an additional dimension into scheduling construction works. To achieve this, a building information model, including the three-dimensional construction site layout object geometry, resource allocation and schedule information, is utilized. The developed method explores further project data that are typically available, such as the assigned equipment to a task, its precise location, and the estimated duration of noisy tasks. This results in a noise prediction model by using noise mapping techniques and suggesting less noisy alternative ways of construction. Finally, noise data obtained from sensors in a case study contribute real values for validating the proposed approach, which can be used later to suggest solutions for noise mitigation.

The results of this study indicate that the proposed approach can accurately predict construction noise given a few available parameters from digital project planning and sensors installed on a construction site. Proactively integrating construction noise control measures into the planning process has benefits for both residents and construction managers, as it reduces construction noise-related disturbances, prevents unexpected legal issues and ensures the health and well-being of the workforce.

While previous research has concentrated on real-time data collection using sensors, a more effective solution would also involve addressing and mitigating construction noise during the pre-construction work planning phase.

Previous studies have identified concerns and anxiety in individuals who are without their mobile phones, which is known as nomophobia, an acronym for “no mobile phone phobia.” However, there is currently limited evidence of qualitative research that explores nomophobia. The purpose of this study is to explore personal experiences and individual meanings associated with mobile phone use and nomophobia.

To address this gap, the present study employed a Heideggerian phenomenological approach to investigate the issue. Ten college students, who have medium to high nomophobia were selected as respondents. Semi-structured interviews were conducted to collect data, which were then transcribed verbatim and analyzed using reflexive thematic analysis.

A deep understanding of the psychological dynamics, experiences, meanings, perceptions and beliefs of individuals regarding smartphone use can only be explored through a qualitative approach that presents personal statements of individuals through in-depth semi-structured interviews. This study contributes to a deep understanding of the psychological dynamic of nomophobia.

This study has limitations that must be carefully considered. First, the respondents came from a university with a sample size of 10 people, which may not fully represent the phenomenon of nomophobia among students due to differences in cultural and academic backgrounds. However, we addressed this limitation by selecting only students who scored moderate to high levels of nomophobia. Second, the researchers acknowledge that the sample used in the study may not be fully representative of the broader target population or a larger group, as previously mentioned. Therefore, generalizing the findings of this research must be done carefully, being cautious and thoughtful to avoid hasty conclusions.

In the functional context, it is recommended for individuals to be more mindful of their smartphone usage and strive to strike a balance between utilizing their device's capabilities for productive purposes and avoiding excessive dependency that may lead to distractions or information overload. This includes limiting excessive smartphone usage for entertainment purposes, restricting aimless and irrelevant Internet browsing and implementing effective time management when using smartphones. For smartphone users from the ontological context, the advice is to critically evaluate their digital presence and ensure that their online activities align with their true values and self-perception, promoting responsible and ethical smartphone use. Engaging in fasting or break sessions by completely turning off the smartphone at specific times and utilizing that time for activities such as reading books, writing and engaging in spiritual practices, or exercising is also advisable. In the anthropomorphic context, individuals are advised to reflect on the potential emotional dependence on their smartphones and consider establishing healthy boundaries to avoid excessive reliance on these devices to fulfill emotional needs. One practical recommendation is to engage in self-reflection, where individuals take some time to ponder their smartphone usage patterns and emotional attachment to the device. They should ask themselves why they feel the need to constantly check their phone and how it impacts their emotions and overall well-being.

This study contributes to a deep understanding of the psychological dynamics of nomophobia by exploring the experiences, meanings, perceptions, and beliefs of individuals regarding smartphone use.

This study aims to provide a comprehensive analysis of how discursive practices shape the promotion of public relations undergraduate programmes in the context of market-driven UK higher education.

Research combines a descriptive analysis of the UK universities offering public relations undergraduate degrees and a critical discourse analysis of the online prospectus entries of 25 public relations undergraduate programmes (often called “courses” in the UK), focussing on the course/programme overview and career path sections.

This wide-ranging review of UK universities’ communication of their public relations provision demonstrates that although the student as consumer has choice, the presentation of the programmes is sometimes “headline grabbing” and often positions public relations as a tactical subject, emphasising promotion and practical skills. Overall, public relations is taught alongside subjects such as marketing, journalism and advertising, and these subjects are foregrounded in promotional material when discussing teaching and potential career paths. Public relations is a difficult subject to explain within the confines of a university prospectus, with the result that it is frequently presented as a promotional practice with little connection to management, leadership or academic research.

To the best authors' knowledge, this is the first study exploring the discursive practices that shape the promotion of public relations undergraduate programmes in UK universities.

Regular monitoring of bacteria, especially Escherichia coli, in wastewater is crucial to ensure the maintenance of public health. Amperometric detection proves to be a fast, sensitive and economically viable solution for E. coli enumeration. This paper reported a prototype amperometric sensor based on PANI-ZnO-NiO nanocomposite thin films prepared by sol–gel method and irradiated with gamma ray. The purpose of this study is to investigate the sensor performance of PANI-ZnO-NiO nanocomposite thin films to detect E. coli in water.

The films were varied with different compositions of ZnO and NiO by using the formula PANI-(ZnO)_1-x-(NiO)_x, with x = 0.2, 0.4, 0.6 and 0.8. PANI-ZnO-NiO nanocomposite thin films were characterized by using X-ray diffraction (XRD) and atomic force microscopy (AFM) to study the crystallinity and surface morphology of the films. The sensor performance was conducted using the current–voltage (I-V) measurement by testing the films in clean water and E. coli solution.

XRD diffractograms show the peaks of ZnO (1 0 0) and NiO (1 0 2). AFM analysis shows the surface roughness, and the grain size of PANI-ZnO-NiO thin films decreases when the concentration ratios of NiO increased. I-V curves show the difference in current flow, where the current in E. coli solution is higher than the clean water.

PANI-(ZnO)_1-x-(NiO)_x nanocomposite thin film with the highest concentration of ZnO performed the highest sensitivity among the other concentrations, which can be used to indicate the presence of E. coli bacteria in water.

This study aims to understand the influence of raceway surface topography on the temperature rise characteristics of silicon nitride (Si₃N₄) full ceramic ball bearing and improve its service life.

The arithmetic average height S_a, skewness S_sk and kurtosis S_ku in the three-dimensional surface roughness parameters are used to quantitatively characterize the surface topography of the raceway after superfinishing. The bearing life testing machine is used to test the Si₃N₄ full ceramic ball bearing using polytetrafluoroethylene (PTFE) cage under dry friction conditions, and the self-lubricating full ceramic ball bearing heat generation model is established.

With the decrease of S_a and S_sk on the raceway surface and the increase of S_ku, the average height of the raceway surface decreases, and the peaks and valleys tend to be symmetrically distributed on the average surface, and the surface texture becomes tighter. This kind of raceway surface topography is beneficial to form a thin and uniform filamentous PTFE transfer film with a wide coverage area on the raceway surface based on consuming less cage materials and improving the temperature rise characteristics of hot isostatic pressing silicon nitride full ceramic ball bearings.

The research results provide a theoretical basis for the reasonable selection of Si₃N₄ ring raceway processing technology and have important significance for improving the working characteristics and service life of Si₃N₄ full ceramic ball bearings under dry friction conditions.

Inspired by the high-friction performance of the soft toe pads of tree frogs, this study aims to investigate the effect of elastic deformation on the lubrication properties of squeezing films inside soft tribocontacts with microstructured surface under wet conditions.

A one-dimensional hydrodynamic extrusion model was used to study the film lubrication characteristics of conformal contact. The lubrication characteristics of the extruded film, including load-carrying capacity, liquid flow and surface elastic deformation, were obtained through the simultaneously iterative solution of the fluid-governing and deformation equations.

The results show that the hydrodynamic pressure is approximating parabolically and symmetrically distributed in the contact area, and the peak value appears in the center of the extrusion surface. Elastic deformation increases the thickness of the liquid film, weakens the bearing capacity and homogenizes the liquid flow rate of inside soft friction contact. The magnitude of this effect greatly increases as the initial liquid film thickness decreases. Moreover, the elastic deformation directly affects the average film thickness of the extrusion contact. Narrow and shallow microchannels are found to result in a more prominent elastic deformation on the microstructured soft surface.

These results present a design for soft tribocontacts suitable for submerged or wet environments involving high friction, such as wiper blades, in situ flexible electrons and underwater robots.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2024-0049/

This paper constructs a tripartite evolutionary game model between the government, the core enterprises of film copyright export and imports and uses the system dynamics model to simulate and find the optimal selection results of single and mixed government incentives under dynamic changes, aiming to promote the development of foreign trade of film copyright and innovation and development of the film industry so as to improve the overall social benefits of the film industry and provide policy enlightenment for enhancing the import power of foreign core enterprises to introduce domestic film copyrights.

In this paper, a tripartite evolutionary game model of the government, the core enterprises of film copyright export and imports is constructed, the evolution process of cooperation strategy is derived, the impact of innovation income coefficient, mixed incentive policy and single incentive policy on the evolution results is analyzed, and the system dynamic model is used to simulate to find the optimal selection results of single and mixed government incentives under dynamic changes, so as to provide reference for the government’s dynamic incentive decision-making.

The results show that export-oriented core firms are more sensitive to mixed incentives, while import-oriented core firms respond more quickly to single incentives. The large innovation income coefficient has a negative impact on the willingness of import-oriented core enterprises to cooperate. The study proposes measures to increase the willingness of core companies to participate.

Due to the fact that numerical simulation is based on simulation, there may be a certain gap between it and the actual situation. Therefore, it is necessary to further use actual data to conduct empirical analysis on the theoretical model.

This article mainly focuses on analyzing the impact of strategy choices and related parameters of various entities on the incentive mechanism and studying the foreign trade cooperation strategies of film copyright export enterprises under policy support from a theoretical model perspective. Furthermore, research has proven that in order to effectively enhance the willingness of foreign import core enterprises to participate in the foreign trade of domestic film copyrights, the government needs to coordinate the use of single incentive policies and mixed incentive policies. This study provides a major contribution for policymaker to develop film copyright import and export trade.

Based on the research conclusions, this paper puts forward management countermeasures to further improve the development of the film copyright import and export trade. The first is to enrich government incentive methods and stimulate the vitality of film copyright and foreign trade market entities. The second is to guide the core enterprises of film copyright export to increase investment in innovation and stimulate the endogenous driving force of industrial development. Finally, lengthen the foreign trade industry chain of film copyright and increase the income of film derivatives.

Firstly, this paper applies the research methods of evolutionary game and system dynamics simulation to the field of foreign trade research on film copyright and expands the research perspectives and methods of the film industry. Secondly, by analyzing the “cost-benefit incentive” relationship of the evolutionary game of government export-oriented core enterprises and importing core enterprises, an evolutionary game model is constructed, the quantitative point of tripartite interest decision-making is solved and the research object of the evolutionary game method is expanded. Finally, the system dynamics model is used to simulate and find the optimal selection results of single and mixed government incentives under dynamic changes, so as to provide reference for the government’s dynamic incentive decision-making.

The incorporation of phosphide additives is regarded as a highly effective strategy for enhancing the lubricative qualities of base oils. This study aims to assess the lubrication behavior and efficacy of various phosphide additives in polyethylsiloxane (PES) through the employment of the Schwingum Reibung Verschleiss test methodology, across a temperature range from ambient to 300°C.

PES demonstrated commendable lubrication capabilities within the Si3N4/M50 system, primarily attributable to the Si-O frictional reaction film at the interface. This film undergoes disintegration as the temperature escalates, leading to heightened wear. Moreover, the phosphide additives were found to ameliorate the issues encountered by PES in the Si3N4/M50 system, characterized by numerous boundary lubrication failure instances. A chemical film comprising P-Fe-O was observed to form at the interface; however, at elevated temperatures, disintegration of some phosphide films precipitated lubrication failures, as evidenced by a precipitous rise in the coefficient of friction.

The results show that a phosphide reactive film can be formed and a reduction in wear rate is achieved, which is reduced by 64.7% from 2.98 (for pure PES at 300°C) to 1.05 × 10^–9 μm³/N m (for triphenyl phosphite at 300°C).

The data derived from this investigation offer critical insights for the selection and deployment of phosphide additives within high-temperature lubrication environments pertinent to PES.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0139/

The lubricating fluid stored in the porous matrix will spontaneously exude to supplement the lubricating film in the damaged area, thus ensuring the long-term self-lubricating function of the porous surface. To reveal the repair mechanism of oil film, it is necessary to understand the flow characteristics of oil in micropores. The purpose of this study guides the design of micropore structure to realize the rapid exudation of oil to the porous surface and the rapid repair of the lubricating film.

In this paper, cylindrical orifice, convergent orifice and divergent orifice were studied. The numerical model of lubricating oil exudation in micropores was established. The distribution characteristics of oil pressure, velocity and three-phase contact line in the process of oil exudation were investigated. The effects of different orifice shapes and orifice structure parameters on the pinning and spreading characteristics of oil droplet were analyzed. Then the internal mechanisms of oil droplet formation and spread on the orifice surface were summarized.

The results show that during the process of oil exudation, the three-phase contact line of the oil drop is pinned once at the edge of the cylindrical and convergent orifice. Compared with the three orifice structures, the inlet pressure of the oil drop is low, and the oil velocity at the pinning point is stable in the divergent orifice. Resulting in favorable oil exudation. It is easier for oil droplet to depin by appropriately reducing the wall wetting angle, increasing the aperture or controlling the wall inclination angle. Ensure the self-healing and long-lasting lubrication film of porous oil-bearing surfaces.

The effect of pore structure on the flow behavior of lubricating fluid has always been concerned. But the mechanism by which different orifice shape affect the pinning behavior of oil droplets is not yet clear, which is crucial for understanding the self-healing mechanism of oil films on porous surfaces. It is meaningful to analyze the mechanism of oil exudation and spreading on the porous surface of oil in the special orifice, to optimize the design of the orifice structure.

Orifice shape has influence on internal flow field parameters. There is no report on the influence of orifice shape on the film formation process of oil seepage and diffusion from pores. The effects of different orifice shapes and orifice structure parameters on the characteristics of oil droplet pinning and diffusion were studied.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0118/