Search results

This study investigates the impact of the fire decay phase on structural damage using the sectional analysis method. The primary objective of this work is to forecast the non-dimensional capacity parameters for the axial and flexural load-carrying capacity of reinforced concrete (RC) sections for heating and the subsequent post-heating phase (decay phase) of the fire.

The sectional analysis method is used to determine the moment and axial capacities. The findings of sectional analysis and heat transfer for the heating stage are initially validated, and the analysis subsequently proceeds to determine the load capacity during the fire’s heating and decay phases by appropriately incorporating non-dimensional sectional and material parameters. The numerical analysis includes four fire curves with different cooling rates and steel percentages.

The study’s findings indicate that the rate at which the cooling process occurs after undergoing heating substantially impacts the axial and flexural capacity. The maximum degradation in axial and flexural capacity occurred in the range of 15–20% for cooling rates of 3 °C/min and 5 °C/min as compared to the capacity obtained at 120 min of heating for all steel percentages. As the fire cooling rate reduced to 1 °C/min, the highest deterioration in axial and flexural capacity reached 48–50% and 42–46%, respectively, in the post-heating stage.

The established non-dimensional parameters for axial and flexural capacity are limited to the analysed section in the study owing to the thermal profile, however, this can be modified depending on the section geometry and fire scenario.

The study primarily focusses on the degradation of axial and flexural capacity at various time intervals during the entire fire exposure, including heating and cooling. The findings obtained showed that following the completion of the fire’s heating phase, the structural capacity continued to decrease over the subsequent post-heating period. It is recommended that structural members' fire resistance designs encompass both the heating and cooling phases of a fire. Since the capacity degradation varies with fire duration, the conventional method is inadequate to design the load capacity for appropriate fire safety. Therefore, it is essential to adopt a performance-based approach while designing structural elements' capacity for the desired fire resistance rating. The proposed technique of using non-dimensional parameters will effectively support predicting the load capacity for required fire resistance.

The fire-resistant requirements for reinforced concrete structures are generally established based on standard fire exposure conditions, which account for the fire growth phase. However, it is important to note that concrete structures can experience internal damage over time during the decay phase of fires, which can be quantitatively determined using the proposed non-dimensional parameter approach.

Pre-construction of a project comprises stages that are pivotal for the procurement performance. It is defined as the duration from the project's initiation to construction. However, Private Public Partnerships (PPPs) have been subjected to a long pre-construction, thereby leading to an inefficient development process. Therefore, the purpose of this paper is to pay attention to the influencing factors elongating the pre-construction duration.

Based on data of 5,677 PPP projects between 2009 and 2021 in China, the authors adopt the Accelerated Failure Time (AFT) model in duration analysis to empirically analyze the following underlying dynamics determining the duration of PPP pre-construction stages: (1) policy uncertainty; (2) corruption; and (3) procurement method selection. To observe the influencing paths more specifically, the authors divided the pre-construction duration into the pre-tendering period and tendering period and regressed them separately.

The results indicate that the pre-construction duration is significantly prolonged with increased policy uncertainty and corruption degree as well as the use of tendering methods. Meanwhile, the above factors have a greater impact on the pre-tendering period than the tendering period.

The contribution of this study is twofold: (1) theoretically, this paper provides new evidence on the impact of PPP policy uncertainty, corruption and procurement method selection on the pre-construction duration. It complements empirical studies on the factors elongating the time efficiency of PPPs projects. (2) In practice, it provides a specific path for the government to improve the time efficiency of PPPs.

The purpose of this paper is to develop a blockchain-based data capture and transmission system that will collect real-time power consumption data from a household electrical appliance and transfer it securely to a local server for energy analytics such as forecasting.

The data capture system is composed of two current transformer (CT) sensors connected to two different electrical appliances. The CT sensors send the power readings to two Arduino microcontrollers which in turn connect to a Raspberry-Pi for aggregating the data. Blockchain is then enabled onto the Raspberry-Pi through a Java API so that the data are transmitted securely to a server. The server provides real-time visualization of the data as well as prediction using the multi-layer perceptron (MLP) and long short term memory (LSTM) algorithms.

The results for the blockchain analysis demonstrate that when the data readings are transmitted in smaller blocks, the security is much greater as compared with blocks of larger size. To assess the accuracy of the prediction algorithms data were collected for a 20 min interval to train the model and the algorithms were evaluated using the sliding window approach. The mean average percentage error (MAPE) was used to assess the accuracy of the algorithms and a MAPE of 1.62% and 1.99% was obtained for the LSTM and MLP algorithms, respectively.

A detailed performance analysis of the blockchain-based transmission model using time complexity, throughput and latency as well as energy forecasting has been performed.

Purpose: Students’ transition from education to employment is influenced by factors like the length and calibre of their education, demography, labour market conditions, and the general state of the economy. Regardless of the economy, education systems should seek to ensure that students have the skills required for the labour market. This will help them better transition from school to work. This study examines the work skills that companies require for entry-level positions in Romania.

Need for Study: Previously, text analysis studies treated the job market only for the IT industry in Romania. To understand the demand-side opportunities and restrictions, assessing the employment opportunities for young people in the Romanian labour market is necessary.

Methodology: A text mining approach from 842 unstructured data of the existing job positions in October 2022 for fresh graduates or students is used in this chapter. The study uses data from LinkedIn job descriptions in the Romanian job market. The methodology involved is focused on text retrieval, text-pre-processing, word cloud analysis, network analysis, and topic modelling.

Findings: The empirical findings revealed that the most common words in job descriptions are experience, team, work, skills, development, knowledge, support, data, business, and software. The correlation network revealed that the most correlated pairs of words are gender–sexual–race–religion–origin–diversity–age–identity–orientation–colour–equal–marital.

Practical Implications: This study looked at the job market and used text analytics to extract a space of skill and qualification dimensions from job announcements relevant to the Romanian employment market instead of depending on subjective knowledge.

The paper aims to clarify the distribution of excess pore pressure during cone penetration in two-layered clay and its influence on penetrometer resistance.

An arbitrary Lagrangian–Eulerian scheme is adopted to preserve the quality of mesh throughout the numerical simulation. Simplified methods of layered penetration and coupled pore pressure analysis of cone penetration have been proposed and verified by previous studies. The investigation is then extended by the present work to study the cone penetration test in a two-layered clay profile assumed to be homogeneous with the modified Cam clay model.

The reduction of the range of pore pressure with decreasing PF will cause a decrease of the sensing distance. The PF of the underlying soil is one of the factors that determine the development distance. The interface can be obtained by taking the position of the maximum curvature of the penetrometer resistance curve in the case of stiff clay overlying soft clay. In the case of soft clay overlying stiff clay, the interface locates at the maximum curvature of the penetrometer resistance curve above about 1.6D.

The cone penetration analyses in this paper are conducted assuming smooth soil-cone contact.

A simplified method based on ALE in Abaqus/Explicit is proposed for layered penetration, which solves the problem of mesh distortion at the interface between two materials. The stiffness equivalent method is also proposed to couple pore pressure during cone penetration, which achieves efficient coupling of pore water pressure in large deformations.

Grounding on the goal-setting theory and flow theory, this study explored the mechanism underlying the association between transfer design (TD); identical elements and training transfer (TT). Specifically, the authors explored a moderated mediation process of trainer performance and motivation to improve work through learning (MTIWL) that has received less consideration in the TT literature.

Data were collected using the retro-perspective survey method. The first survey was administered offline (t1: the day when leadership intervention was completed. Subsequently, trainees were requested to participate in an online survey (t2: 12–14 weeks later). In all, 355 executives participated.

The results of structural equation modeling (SEM) analyses suggested that trainees’ MTIWL mediational impact between leadership intervention triggers (transfer design and identical elements), and TT was supported. In addition, the indirect impact of these variables on TT was found to be significant when the trainer had high performance than when it was low. This confirmed the trainer’s performance as a potential moderator in the TT process.

This study is limited to the exploration of leadership intervention variables on TT. The findings have implications for leadership professionals and scholars who use leadership intervention and motivation metrics to predict TT.

This study offers a moderated mediation mechanism for enhancing TT through leadership intervention triggers. The proposed conceptual model included MTIWL as mediator and trainer performance during leadership intervention as moderator.

This paper presents a new and well-structured framework that aims to assess the current environmental impact from a Greenhouse Gas (GHG) emissions perspective. This tool includes a new set of Lean Key Performance Indicators (KPIs), which translates the well-known logic of Overall Equipment Effectiveness in the field of GHG emissions, that can progressively detect industrial losses that cause GHG emissions and support decision-making for implementing improvements.

The new metrics are presented with reference to two different perspectives: (1) to highlight the deviation of the current value of emissions from the target; (2) to adopt a diagnostic orientation not only to provide an assessment of current performance but also to search for the main causes of inefficiencies and to direct improvement implementations.

The proposed framework was applied to a major company operating in the plywood production sector. It identified emission-related losses at each stage of the production process, providing an overall performance evaluation of 53.1%. The industrial application shows how the indicators work in practice, and the framework as a whole, to assess GHG emissions related to industrial losses and to proper address improvement actions.

This paper scrutinizes a new set of Lean KPIs to assess the industrial losses causing GHG emissions and identifies some significant drawbacks. Then it proposes a new structure of losses and KPIs that not only quantify efficiency but also allow to identify viable countermeasures.

This study analyzed the impact on the persistence of Chilean university students who had received a government-guaranteed loan (CAE).

Using academic and administrative data from 2016 to 2019, provided by 11 Chilean universities, a discrete-time survival model was constructed. The model was based on data of 5,276 students in the 2016 cohort and included sociodemographic variables, academic background prior to entering university and academic performance once in university. As a robustness check of our results to observable confounding, the analysis was repeated using a control group constructed using propensity score matching (PSM).

The results reveal that students who receive a bank loan (CAE) were more likely to remain in undergraduate studies for at least the first two years of university, as opposed to their peers who did not receive financial aid. In addition, they show the importance of academic performance in retention.

The article advances in the identification of the impact of bank loans on permanence. Although previous research has evaluated the impact of the CAE, it has been conducted on small samples of students. These studies also lacked student records associated with their academic performance at the university. The present research overcomes both weaknesses, allowing us to estimate the impact of the CAE on a larger population of students that is representative of the system.

Prior studies on the impact of incentives on physicians’ online participation mainly focused on different incentives while ignoring the difficulty of setting monetary incentives efficiently. Based on goal-setting theory, the current research examines the relationship between incentives with goals of varying difficulty and professional health knowledge sharing (PHKS) in online health knowledge-sharing platforms (OHKSPs).

Four field experiments with different monetary incentives were conducted by one of China’s largest OHKSPs, with whom the researchers cooperated in data collection. Monthly panel data on 10,584 physicians were collected from September 2018 to December 2019. There were 9,376 physicians in the treatment group and 1,208 in the control group. The authors used a difference-in-difference (DID) model to explore the research question based on the same control group and the Chow test with seemingly unrelated estimation (sureg) to compare regression coefficients between four groups. Several robustness checks were performed to validate the main results, including a relative time model, multiple falsification tests and a DID estimation using the propensity score matching method.

The results show that the monetary incentive significantly positively affected the volume of physicians’ PHKS directly with negative spillover to the duration of physicians’ PHKS. Moreover, the positive effect of incentives with higher difficulty on the volume of physicians’ PHKS was significantly smaller than that of incentives with low difficulty. Finally, professional title had a positive moderating effect on the volume of goal difficulty setting and did not significantly moderate the effect on the duration of physicians’ PHKS.

Some limitations of this study are: firstly, because the field experiments were enterprise benefit oriented, the treatment and control groups were not balanced. Secondly, the experiments for different incentive measures were relatively similar, making it challenging to validate a causal effect. Finally, more consideration should be given to the strategy for setting hierarchical incentives in future research.

The research indicates that monetary incentives have a bilateral effect on PHKS, i.e. a positive direct effect on the volume of physicians’ contributions and a negative spillover effect on the duration of physicians’ PHKS. The professional titles of physicians also moderate such bilateral switches of PHKS. Furthermore, when a physician’s energy is limited, the goal difficulty setting of the incentive mechanism tends to be low. The more difficult the incentives are, the more inefficient the effects on physicians’ PHKS will be.

The study aims to examine the indirect relationships via application (app) brand self-relevance emotions and self-relevance that underlie the relationships between perceived value of mobile apps and (brand) love with respect to mobile apps. The study further investigates the moderating role of user–app relationship duration in the formation process of brand love for mobile apps from a dynamic and long-term perspective.

A multiple moderated-mediation model is developed and empirically tested with a sample of 396 users of popular Chinese mobile educational apps.

The study reveals that utilitarian value exhibits positive indirect relationships with brand love for mobile apps through increased positive self-relevance emotions. All three types of perceived value of mobile apps (utilitarian, hedonic and social) affect app brand love positively via self-relevance. These three types of perceived value were found to be serially linked to brand love through self-relevance and self-relevance emotions. Furthermore, empirical evidence is found for the moderating effects of user–app relationship duration.

By testing mechanisms simultaneously in an integrative model, this study investigates the reasons for app brand love that attract a user into a lasting relationship with an app and extends knowledge of the app brand love building process in inducing strong and positive brand–self connections. Our study also makes practical contributions by offering insights into delivering the most desired benefits to mobile app users according to different contextual conditions, in order to attract and retain users in a more cost-effective manner.