Search results

1 – 10 of 17
Article
Publication date: 26 April 2024

Bo Zhang, Yuqian Zheng, Zhiyuan Cui, Dongdong Song, Faqian Liu and Weihua Li

The impact of rolling on the performance of micro arc oxidation (MAO) coatings on ZM5 alloy has been underreported. The purpose of this study is to explore the correlation between…

Abstract

Purpose

The impact of rolling on the performance of micro arc oxidation (MAO) coatings on ZM5 alloy has been underreported. The purpose of this study is to explore the correlation between rolling and the failure mechanism of MAO coatings in greater depth.

Design/methodology/approach

The influence of rolling on the corrosion and wear properties of MAO coating was investigated by phase structure, bond strength test (initial bond strength and wet adhesion), electrochemical impedance spectroscopy and wear test. The change of the surface electrochemical properties was studied by first principles analysis.

Findings

The results showed that the MAO coating on rolled alloy had better corrosion and wear resistance compared to cast alloy, although the structure and component content of two kinds of MAO coating are nearly identical. The difference in interface bonding between MAO coating and Mg substrate is the primary factor contributing to the disparity in performance between the two types of samples. Finally, the impact of the rolling process on MAO coating properties is explained through first-principle calculation.

Originality/value

A comprehensive explanation of the impact of the rolling process on MAO coating properties will provide substantial support for enhancing the application of Mg alloy anticorrosion.

Graphical abstract

Details

Anti-Corrosion Methods and Materials, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0003-5599

Keywords

Article
Publication date: 13 April 2023

Chunmei Gan, Hongxiu Li and Yong Liu

To understand the mechanisms underlying social media discontinuance behavior, this study explores factors affecting social media discontinuance behavior from the perspective of…

Abstract

Purpose

To understand the mechanisms underlying social media discontinuance behavior, this study explores factors affecting social media discontinuance behavior from the perspective of social cognitive theory (SCT).

Design/methodology/approach

Based on SCT, this study puts forward a theoretical model incorporating habit, excessive use and negative emotions to predict social media discontinuance behavior. The proposed research model was empirically tested with 465 responses collected from WeChat users in China via an online survey. WeChat is one of the most popular social media in China. However, WeChat also faces the challenges of reduced or terminated usage among its users. Partial least squares structural equation modeling (PLS-SEM) technique was used to analyze the data.

Findings

The research results in this study show that habit exerts a negative effect on social media discontinuance behavior, while exhaustion and regret have positive influences. In addition, habit positively affects excessive use, which further leads to negative emotions of social media exhaustion and regret. Moreover, gender moderates the relationship between habit and social media discontinuance behavior.

Originality/value

This study adds to the literature of information system (IS) use lifecycle by investigating user behavioral changes regarding a transition from habituated to excessive use and further to discontinuance behavior. This study also helps elucidate the complex role of habit by explaining social media discontinuance from the social cognitive view. Furthermore, this study advances the current understanding of gender difference in social media discontinuance in the Chinese context. The study also offers insights to practitioners on how to prevent individuals from discontinuing their use of social media.

Details

Information Technology & People, vol. 37 no. 3
Type: Research Article
ISSN: 0959-3845

Keywords

Article
Publication date: 28 February 2024

Li Genqiang, Tao Yueying, Meng Yong and Lu Min

Based on cognitive appraisal theory of stress, this study develops an integrated model to examine the double-edged sword effect and boundary conditions of the impact of…

Abstract

Purpose

Based on cognitive appraisal theory of stress, this study develops an integrated model to examine the double-edged sword effect and boundary conditions of the impact of organizational crisis on employee behavior.

Design/methodology/approach

This study collected 672 employees’ data through three stages of longitudinal follow-up. Hierarchical regression analysis and SPSS macro process were used to test the hypotheses.

Findings

The paper finds that organizational crisis induces unethical pro-organizational behavior through enhanced job insecurity and foster taking charge by stimulating career calling. Employee resilience negatively moderates the relationship between organizational crisis and job insecurity as well as the indirect effects of organizational crisis on unethical pro-organizational behavior through job insecurity. Conversely, it positively moderates the association between organizational crisis and career calling and the indirect effects on taking charge through career calling.

Research limitations/implications

This study not only expands the research on the mechanisms of organizational crisis' effects on employees' behaviors but also provides practical guidance for corporate managers on how to respond to organizational crisis.

Practical implications

The following insights are available to organizations and managers: first, this study confirms that organizational crisis can be perceived as threatening stressors that create job insecurity, which in turn leads to pro-organizational unethical behavior. Therefore, managers in organizational crisis should focus on stress regulation and guidance, pay timely attention to changes in the mindset of employees to reduce job insecurity, and strictly prohibit unethical pro-organizational behavior. They should promptly calm and control the atmosphere of panic and anxiety in the organization, do a good job of coordinating the division of labor, reduce personnel conflicts and contradictions, create a good organizational climate and reduce employees' sense of stress and negative perceptions of organizational crisis, thus reducing job insecurity and being able to meet the challenges in a better state. Secondly, this study confirms that employees also perceive organizational crisis as challenges and develop career calling, which in turn inspires proactive change behaviors. This suggests that managers in organizational crisis should promote the positive perception of organizational crisis as challenge, stimulate the career calling of employees in organizational crisis and call on and encourage employees to actively adopt taking charge. Therefore, managers should promptly give employees work affirmation, rewards and punishments, enhance the sense of participation and intrinsic motivation of subordinates, improve self-efficacy and self-confidence levels, effectively reduce the negative perception of organizational crisis, awaken positive psychological energy within individuals, increase their sense of belonging to the organization and thus, increase employees' awareness of the positive challenges of organizational crisis, stimulate employees' career calling through positive and optimistic beneficial pressure drive them to lead the corresponding changes in the crisis. Finally, this study confirms that employees' own resilience can change the double-edged sword effect of organizational crisis. Employees with high resilience are more likely to see organizational crisis as challenge and are thus more likely to develop career calling and are more inclined to initiate change, while employees with low resilience are more likely to see organizational crisis as threat, are more negatively affected by them, develop greater job insecurity and are, thus, more inclined to commit unethical pro-organizational behaviors. This reflects the fact that organizations should constantly cultivate employees' resilience and enhance their cognitive toughness at the same time. For instance, the organization can regularly use promotional lectures and scenarios to help leaders and employees establish corporate ethics, strengthen moral beliefs and correctly understand the nature of unethical affinity behavior. Managers should encourage and advocate positive and correct behaviors such as overcoming difficulties, positive innovation and positive suggestions to promote the sustainable and healthy development of the organization.

Social implications

The results of this study can increase the organization’s understanding of the negative effects of crisis, help the organization take measures to manage and guide the employees in organizational crisis, more effective and targeted functional changes within the organization, reduce stress damage and improve the efficiency and effectiveness of crisis management. It is also beneficial to improve competitiveness and foresight in the organization’s industry and enhance organizations and employees’ resilience.

Originality/value

This study explores the double-edged sword effect of organizational crisis on employees’ behavior from the perspective of the cognitive appraisal theory of stress, which theoretically opens up a new research perspective, enriches the research in the fields of organizational crisis and taking charge, pro-organizational unethical behavior relationship and practically provides theoretical guidance for enterprises and managers on how to effectively respond to organizational crisis from the employees, which is of great practical significance.

Details

Journal of Organizational Change Management, vol. 37 no. 2
Type: Research Article
ISSN: 0953-4814

Keywords

Article
Publication date: 11 March 2024

Su Yong and Gong Wu-Qi

Abnormal vibrations often occur in the liquid oxygen kerosene transmission pipelines of rocket engines, which seriously threaten their safety. Improper handling can result in…

39

Abstract

Purpose

Abnormal vibrations often occur in the liquid oxygen kerosene transmission pipelines of rocket engines, which seriously threaten their safety. Improper handling can result in failed rocket launches and significant economic losses. Therefore, this paper aims to examine vibrations in transmission pipelines.

Design/methodology/approach

In this study, a three-dimensional high-pressure pipeline model composed of corrugated pipes, multi-section bent pipes, and other auxiliary structures was established. The fluid–solid coupling method was used to analyse vibration characteristics of the pipeline under various external excitations. The simulation results were visualised using MATLAB, and their validity was verified via a thermal test.

Findings

In this study, the vibration mechanism of a complex high-pressure pipeline was examined via a visualisation method. The results showed that the low-frequency vibration of the pipe was caused by fluid self-excited pressure pulsation, whereas the vibration of the engine system caused a high-frequency vibration of the pipeline. The excitation of external pressure pulses did not significantly affect the vibrations of the pipelines. The visualisation results indicated that the severe vibration position of the pipeline thermal test is mainly concentrated between the inlet and outlet and between the two bellows.

Practical implications

The results of this study aid in understanding the causes of abnormal vibrations in rocket engine pipelines.

Originality/value

The causes of different vibration frequencies in the complex pipelines of rocket engines and the propagation characteristics of external vibration excitation were obtained.

Details

Aircraft Engineering and Aerospace Technology, vol. 96 no. 3
Type: Research Article
ISSN: 1748-8842

Keywords

Article
Publication date: 23 April 2024

Zhenbao Wang, Zhen Yang, Mengyu Liu, Ziqin Meng, Xuecheng Sun, Huang Yong, Xun Sun and Xiang Lv

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of…

Abstract

Purpose

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of this paper is to further optimize the line spacing to improve the performance of meanders for sensor application.

Design/methodology/approach

The model of GMI effect of microribbon with meander type is established. The effect of line spacing (Ls) on GMI behavior in meanders is analyzed systematically.

Findings

Comparison of theory and experiment indicates that decreasing the line spacing increases the negative mutual inductance and a consequent increase in the GMI effect. The maximum value of the GMI ratio increases from 69% to 91.8% (simulation results) and 16.9% to 51.4% (experimental results) when the line spacing is reduced from 400 to 50 µm. The contribution of line spacing versus line width to the GMI ratio of microribbon with meander type was contrasted. This behavior of the GMI ratio is dominated by the overall negative contribution of the mutual inductance.

Originality/value

This paper explores the effect of line spacing on the GMI ratio of meander type by comparing the simulation results with the experimental results. The superior line spacing is found in the identical sensing area. The findings will contribute to the design of high-performance micropatterned ribbon with meander-type GMI sensors and the establishment of a ribbon-based magnetic-sensitive biosensing system.

Details

Sensor Review, vol. 44 no. 3
Type: Research Article
ISSN: 0260-2288

Keywords

Article
Publication date: 30 April 2024

Yong Wang, Yuting Liu and Fan Xu

Soft robots are known for their excellent safe interaction ability and promising in surgical applications for their lower risks of damaging the surrounding organs when operating…

Abstract

Purpose

Soft robots are known for their excellent safe interaction ability and promising in surgical applications for their lower risks of damaging the surrounding organs when operating than their rigid counterparts. To explore the potential of soft robots in cardiac surgery, this paper aims to propose an adaptive iterative learning controller for tracking the irregular motion of the beating heart.

Design/methodology/approach

In continuous beating heart surgery, providing a relatively stable operating environment for the operator is crucial. It is highly necessary to use position-tracking technology to keep the target and the surgical manipulator as static as possible. To address the position tracking and control challenges associated with dynamic targets, with a focus on tracking the motion of the heart, control design work has been carried out. Considering the lag error introduced by the material properties of the soft surgical robotic arm and system delays, a controller design incorporating iterative learning control with parameter estimation was used for position control. The stability of the controller was analyzed and proven through the construction of a Lyapunov function, taking into account the unique characteristics of the soft robotic system.

Findings

The tracking performance of both the proportional-derivative (PD) position controller and the adaptive iterative learning controller are conducted on the simulated heart platform. The results of these two methods are compared and analyzed. The designed adaptive iterative learning control algorithm for position control at the end effector of the soft robotic system has demonstrated improved control precision and stability compared with traditional PD controllers. It exhibits effective compensation for periodic lag caused by system delays and material characteristics.

Originality/value

Tracking the beating heart, which undergoes quasi-periodic and complex motion with varying accelerations, poses a significant challenge even for rigid mechanical arms that can be precisely controlled and makes tracking targets located at the surface of the heart with the soft robot fraught with considerable difficulties. This paper originally proposes an adaptive interactive learning control algorithm to cope with the dynamic object tracking problem. The algorithm has theoretically proved its convergence and experimentally validated its performance at the cable-driven soft robot test bed.

Details

Robotic Intelligence and Automation, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2754-6969

Keywords

Article
Publication date: 23 April 2024

Yong Liu, Xue-ge Guo, Qin Jiang and Jing-yi Zhang

We attempt to construct a grey three-way conflict analysis model with constraints to deal with correlated conflict problems with uncertain information.

Abstract

Purpose

We attempt to construct a grey three-way conflict analysis model with constraints to deal with correlated conflict problems with uncertain information.

Design/methodology/approach

In order to address these correlated conflict problems with uncertain information, considering the interactive influence and mutual restraints among agents and portraying their attitudes toward the conflict issues, we utilize grey numbers and three-way decisions to propose a grey three-way conflict analysis model with constraints. Firstly, based on the collected information, we introduced grey theory, calculated the degree of conflict between agents and then analyzed the conflict alliance based on the three-way decision theory. Finally, we designed a feedback mechanism to identify key agents and key conflict issues. A case verifies the effectiveness and practicability of the proposed model.

Findings

The results show that the proposed model can portray their attitudes toward conflict issues and effectively extract conflict-related information.

Originality/value

By employing this approach, we can provide the answers to Deja’s fundamental questions regarding Pawlak’s conflict analysis: “what are the underlying causes of conflict?” and “how can a viable consensus strategy be identified?”

Details

Kybernetes, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0368-492X

Keywords

Article
Publication date: 16 April 2024

Richard Tarpey, Jinfeng Yue, Yong Zha and Jiahong Zhang

The importance of service firms cooperating with digital platforms is widely acknowledged. The authors study three contractual relationships (fixed-cost, cost-sharing, and…

Abstract

Purpose

The importance of service firms cooperating with digital platforms is widely acknowledged. The authors study three contractual relationships (fixed-cost, cost-sharing, and profit-sharing) between service firms (specifically hotels) and digital platforms in a highly fragmented service supply chain to examine which of these contract types optimizes profits.

Design/methodology/approach

The authors extend prior models analyzing the optimal expected total profit from the travel service firm (hotel)–digital platform relationship, providing new insights into each contract type’s ability to coordinate decentralized systems and optimize profits for both parties.

Findings

This study finds that fixed cost contracts cannot coordinate the decentralized system. Cost-sharing contracts can coordinate the decentralized system but only allow one channel profit split. In contrast, profit-sharing contracts may not always perfectly coordinate the decentralized system but support alternative profit allocations. Practically, both profit-sharing and cost-sharing contracts are preferable to fixed-cost contracts.

Practical implications

The paper includes implications for travel service firm managers to consider when structuring contracts with digital platforms to focus on profit optimization. Profit-sharing contracts are most preferable when cost and revenue data are fully shared between parties, while cost-sharing contracts are preferable over fixed-cost contracts.

Originality/value

This study extends prior investigations into the utility of different contract types on the optimal profit of a travel service firm (hotel)-digital platform provider relationship. The research fills a gap in the literature concerning the contracts used in these relationship types.

Details

Journal of Service Theory and Practice, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2055-6225

Keywords

Article
Publication date: 29 December 2023

Fatima Shaikh, Gul Afshan and Khalil Ahmed Channa

This study aims to investigate the efforts and role of technology leaders in achieving organizational commitment to sustainability through mediating the role of green HRM…

Abstract

Purpose

This study aims to investigate the efforts and role of technology leaders in achieving organizational commitment to sustainability through mediating the role of green HRM practices and moderating the role of green knowledge sharing.

Design/methodology/approach

This empirical research study is based on two theories: upper echelon theory and social capital theory, in which data were collected from 284 permanent faculty employees belonging to the government, semi-government and private HEIs recognized universities of Pakistan.

Findings

The results confirm that the technology leadership style has a significant impact on organizational commitment to sustainability. Whereas green HRM practices as a mediator and green knowledge-sharing behavior as a moderator have also significant impacts on the organizational commitment to sustainability.

Originality/value

This study integrates the concept of technology leadership as a strategy and green HRM practices as a process that jointly impacts organizational commitment to sustainability.

Details

Journal of Organizational Change Management, vol. 37 no. 2
Type: Research Article
ISSN: 0953-4814

Keywords

Article
Publication date: 1 November 2023

Juan Yang, Zhenkun Li and Xu Du

Although numerous signal modalities are available for emotion recognition, audio and visual modalities are the most common and predominant forms for human beings to express their…

Abstract

Purpose

Although numerous signal modalities are available for emotion recognition, audio and visual modalities are the most common and predominant forms for human beings to express their emotional states in daily communication. Therefore, how to achieve automatic and accurate audiovisual emotion recognition is significantly important for developing engaging and empathetic human–computer interaction environment. However, two major challenges exist in the field of audiovisual emotion recognition: (1) how to effectively capture representations of each single modality and eliminate redundant features and (2) how to efficiently integrate information from these two modalities to generate discriminative representations.

Design/methodology/approach

A novel key-frame extraction-based attention fusion network (KE-AFN) is proposed for audiovisual emotion recognition. KE-AFN attempts to integrate key-frame extraction with multimodal interaction and fusion to enhance audiovisual representations and reduce redundant computation, filling the research gaps of existing approaches. Specifically, the local maximum–based content analysis is designed to extract key-frames from videos for the purpose of eliminating data redundancy. Two modules, including “Multi-head Attention-based Intra-modality Interaction Module” and “Multi-head Attention-based Cross-modality Interaction Module”, are proposed to mine and capture intra- and cross-modality interactions for further reducing data redundancy and producing more powerful multimodal representations.

Findings

Extensive experiments on two benchmark datasets (i.e. RAVDESS and CMU-MOSEI) demonstrate the effectiveness and rationality of KE-AFN. Specifically, (1) KE-AFN is superior to state-of-the-art baselines for audiovisual emotion recognition. (2) Exploring the supplementary and complementary information of different modalities can provide more emotional clues for better emotion recognition. (3) The proposed key-frame extraction strategy can enhance the performance by more than 2.79 per cent on accuracy. (4) Both exploring intra- and cross-modality interactions and employing attention-based audiovisual fusion can lead to better prediction performance.

Originality/value

The proposed KE-AFN can support the development of engaging and empathetic human–computer interaction environment.

1 – 10 of 17