Search results

The substantial expansion of technology and the efficacy of digital platforms in reaching young audiences have led to enhanced targeting and customization of promotional communications. Notwithstanding the expansion and efficacy of contemporary advertising platforms, scholarly attention has not kept pace with this domain of inquiry. This study aims to assess the antecedents of Google Shopping Ads (GSA) on intention to purchase behavior among the Generation Y and Z cohorts.

The current study used a quantitative approach and snowball sampling technique to gather primary data via a questionnaire and Google Forms, which resulted in the collection of 5,808 questionnaires among the cohort members. A principal component analysis and multigroup confirmatory multigroup structural equation modeling (between Generation Y and Z) were used to assess the research data and model.

The results show positive trust and perceived value associations with intention to purchase, particularly among Generation Y and Z consumers. The findings also show negative irritation, product risk and time risk associations with intention to purchase, especially among the Generation Y cohort, which indicates that young consumers generally do not observe perceived risk due to the usage of GSA.

GSA will continue to grow and become an increasingly important integrated marketing communications tool as the digital landscape develops. It can be concluded that young consumers show a high degree of perceived value and low levels of perceived risk due to the use of GSA. This study, therefore, promotes improved understanding among academics, marketers and businesses of search engine advertising among young cohorts of consumers (Generation Y and Z) in a developing country context.

This study aims to assess the effect of water variation on bioethanol production from cassava peels (CP) using Saccharomyces cerevisiae yeast as the ethanologenic agent.

The milled CP was divided into three treatment groups in a small-scale flask experiment where each 20 g CP was subjected to two-stage hydrolysis. Different amount of water was added to the fermentation process of CP. The fermented samples were collected every 24 h for various analyses.

The results of the fermentation revealed that the highest ethanol productivity and fermentation efficiency was obtained at 17.38 ± 0.30% and 0.139 ± 0.003 gL⁻¹ h⁻¹. The study affirmed that ethanol production was increased for the addition of water up to 35% for the CP hydrolysate process.

The finding of this study demonstrates that S. cerevisiae is the key player in industrial ethanol production among a variety of yeasts that produce ethanol through sugar fermentation. In order to design truly sustainable processes, it should be expanded to include a thorough analysis and the gradual scaling-up of this process to an industrial level.

This paper is an original research work dealing with bioethanol production from CP using S. cerevisiae microbe.

1. Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

2. Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

3. Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

4. Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

Simulations exist for the prediction of the behaviour of building structural systems under fire, including two-way coupled fire-structure interaction. However, these simulations do not include detailed models of the connections, whereas these connections may impact the overall behaviour of the structure. Therefore, this paper proposes a two-scale method to include screw connections.

The two-scale method consists of (a) a global-scale model that models the overall structural system and (b) a small-scale model to describe a screw connection. Components in the global-scale model are connected by a spring element instead of a modelled screw, and the stiffness of this spring element is predicted by the small-scale model, updated at each load step. For computational efficiency, the small-scale model uses a proprietary technique to model the behaviour of the threads, verified by simulations that model the complete thread geometry, and validated by existing pull-out experiments. For four screw failure modes, load-deformation behaviour and failure predictions of the two-scale method are verified by a detailed system model. Additionally, the two-scale method is validated for a combined load case by existing experiments, and demonstrated for different temperatures. Finally, the two-scale method is illustrated as part of a two-way coupled fire-structure simulation.

It was shown that proprietary ”threaded connection interaction” can predict thread relevant failure modes, i.e. thread failure, shank tension failure, and pull-out. For bearing, shear, tension, and pull-out failure, load-deformation behaviour and failure predictions of the two-scale method correspond with the detailed system model and Eurocode predictions. Related to combined load cases, for a variety of experiments a good correlation has been found between experimental and simulation results, however, pull-out simulations were shown to be inconsistent.

More research is needed before the two-scale method can be used under all conditions. This relates to the failure criteria for pull-out, combined load cases, and temperature loads.

The two-scale method bridges the existing very detailed small-scale screw models with present global-scale structural models, that in the best case only use springs. It shows to be insightful, for it contains a functional separation of scales, revealing their relationships, and it is computationally efficient as it allows for distributed computing. Furthermore, local small-scale non-convergence (e.g. a screw failing) can be handled without convergence problems in the global-scale structural model.

The proposed model has been aimed to predict stock market signals by designing an accurate model. In this sense, the stock market is analysed by the technical analysis of Japanese Candlestick, which is combined by the following meta heuristic algorithms: support vector machine (SVM), meta-heuristic algorithms, particle swarm optimization (PSO), imperialist competition algorithm (ICA) and genetic algorithm (GA).

In addition, among the developed algorithms, the most effective one is chosen to determine probable sell and buy signals. Moreover, the authors have proposed comparative results to validate the designed model in this study with the same basic models of three articles in the past. Hence, PSO is used as a classification method to search the solution space absolutelyand with the high speed of running. In terms of the second model, SVM and ICA are examined by the time. Where the ICA is an improver for the SVM parameters. Finally, in the third model, SVM and GA are studied, where GA acts as optimizer and feature selection agent.

Results have been indicated that, the prediction accuracy of all new models are high for only six days, however, with respect to the confusion matrixes results, it is understood that the SVM-GA and SVM-ICA models have correctly predicted more sell signals, and the SCM-PSO model has correctly predicted more buy signals. However, SVM-ICA has shown better performance than other models considering executing the implemented models.

In this study, the authors to analyze the data the long length of time between the years 2013–2021, makes the input data analysis challenging. They must be changed with respect to the conditions.

In this study, two methods have been developed in a candlestick model, they are raw based and signal-based approaches which the hit rate is determined by the percentage of correct evaluations of the stock market for a 16-day period.

This study aims to examine the effects of climate change and agricultural technologies on crop production in Vietnam for the period 1990–2018.

Several econometric techniques – such as the augmented Dickey–Fuller, Phillips–Perron, the autoregressive distributed lag (ARDL) bounds test, variance decomposition method (VDM) and impulse response function (IRF) are used for the empirical analysis.

The results of the ARDL bounds test confirm the significant dynamic relationship among the variables under consideration, with a significance level of 1%. The primary findings indicate that the average annual temperature exerts a negative influence on crop yield, both in the short term and in the long term. The utilization of fertilizer has been found to augment crop productivity, whereas the application of pesticides has demonstrated the potential to raise crop production in the short term. Moreover, both the expansion of cultivated land and the utilization of energy resources have played significant roles in enhancing agricultural output across both in the short term and in the long term. Furthermore, the robustness outcomes also validate the statistical importance of the factors examined in the context of Vietnam.

This study provides persuasive evidence for policymakers to emphasize advancements in intensive agriculture as a means to mitigate the impacts of climate change. In the research, the authors use average annual temperature as a surrogate measure for climate change, while using fertilizer and pesticide usage as surrogate indicators for agricultural technologies. Future research can concentrate on the impact of ICT, climate change (specifically pertaining to maximum temperature, minimum temperature and precipitation), and agricultural technological improvements that have an impact on cereal production.

To the best of the authors’ knowledge, this study is the first to examine how climate change and technology effect crop output in Vietnam from 1990 to 2018. Various econometrics tools, such as ARDL modeling, VDM and IRF, are used for estimation.

Having defined liquidity, the aim is to assess the predictive capacity of its representative variables, so that economic fluctuations may be better understood.

Conceptual variables that are representative of liquidity will be used to formulate the predictions. The results of various machine learning models will be compared, leading to some reflections on the predictive value of the liquidity variables, with a view to defining their selection.

The predictive capacity of the model was also found to vary depending on the source of the liquidity, in so far as the data on liquidity within the private sector contributed more than the data on public sector liquidity to the prediction of economic fluctuations. International liquidity was seen as a more diffuse concept, and the standardization of its definition could be the focus of future studies. A benchmarking process was also performed when applying the state-of-the-art machine learning models.

Better understanding of these variables might help us toward a deeper understanding of the operation of financial markets. Liquidity, one of the key financial market variables, is neither well-defined nor standardized in the existing literature, which calls for further study. Hence, the novelty of an applied study employing modern data science techniques can provide a fresh perspective on financial markets.

因此,就了解經濟週期和經濟發展而言,流動資金是一個極其重要的概念。本研究擬在安全資產的價格預測方面取得進步。安全資產代表了經濟的實際情況,特別是美國的十年期國債。

流動資金的定義上面已說明了; 為進一步了解經濟波動,本研究擬對流動資金代表性變量的預測能力進行評估。

研究使用作為流動資金代表的概念變項去規劃預測。各機器學習模型的結果會作比較,這會帶來對流動資金變量的預測值的深思,而深思的目的是確定其選擇。

只要在私營部門內流動資金的數據比公營部門的流動資金數據、在預測經濟波動方面貢獻更大時,我們發現、模型的預測能力也會依賴流動資金的來源而存在差異。國際流動資金被視為一個晦澀的概念,而它的定義的標準化,或許應是未來學術研究的焦點。當應用最先進的機器學習模型時,標桿分析法的步驟也施行了。

若我們對有關的變量加深認識,我們就可更深入地理解金融市場的運作。流動資金,雖是金融市場中一個極其重要的變量,但在現存的學術文獻裏,不但沒有明確的定義,而且也沒有被標準化; 就此而言,未來的研究或許可在這方面作進一步的探討。因此,本研究為富有新穎思維的應用研究,研究使用了現代數據科學技術,這可為探討金融市場提供一個全新的視角。

Super-tall towers have surfaced as a pragmatic remedy to meet the escalating requisites for both residential and commercial areas and to stimulate economic growth in the Middle East. In this unique regional context, optimizing spatial usage stands as a paramount consideration in the architectural design of skyscrapers. Despite the proliferation of super-tall towers, there exists a conspicuous dearth of comprehensive research pertaining to space efficiency in Middle Eastern skyscrapers. This study endeavors to bridge this substantial gap in the literature.

The research methodology utilized in this paper adopts a case study approach to accumulate data regarding super-tall towers in the Middle East, with a specific focus on investigating space efficiency. A total of 27 super-tall tower cases from the Middle East were encompassed within the analytical framework.

Key findings can be succinctly summarized as follows: (1) average space efficiency was 75.5%, with values fluctuating between a minimum of 63% and a maximum of 84%; (2) average ratio of the core area to the gross floor area (GFA) registered 21.3%, encompassing a spectrum ranging from 11% to 36%; (3) predominantly, Middle Eastern skyscrapers exhibited a prismatic architectural form coupled with a central core typology. This architectural configuration mostly catered to residential and mixed-use functions; (4) the combination of concrete and outrigger frame systems was the most frequently utilized; (5) as the height of the tower increased, space efficiency tended to experience a gradual decline and (6) no significant discernible disparities were detected in the impact of diverse load-bearing systems and architectural forms on space efficiency.

Despite the proliferation of super-tall towers, there exists a conspicuous dearth of comprehensive research pertaining to space efficiency in Middle Eastern skyscrapers. This study endeavors to bridge this substantial gap in the literature.

We aimed to identify factors that influence student engagement in distance learning.

The research involved a group of 671 students from economic and technical higher education institutions in Poland. We collected the data with the CAWI technique and an original survey. Next, we processed the data using principal component analysis and then used the extracted components as predictors in the induced smoothing LASSO regression model.

The components of the students’ attitude toward remote classes learning conditions are: satisfaction with teachers’ approach, attitude to distance learning, the system of students’ values and motivation, IT infrastructure of the university, building a network of contacts and communication skills. The final model consisted of seven statistically significant variables, encompassing the student’s sex, level of studies and the first five extracted PCs. Student’s system of values and motivation as well as attitude toward distance learning, were those variables that had the biggest influence on student engagement.

The research result suggests that in addition to students’ system of values and motivation and their attitude toward distance learning, the satisfaction level of teachers’ attitude is one of the three most important factors that influence student engagement during the distance learning process.

The main value of this article is the statistical model of student engagement during distance learning. The article fills the research gap in identifying and evaluating the impact of various factors determining student engagement in the distance learning process.

This study aims to analyze how ready a firm is to transform into Industry 4.0 using the Readiness Index (INDI 4.0) assessment. It also investigates the differences (before and after) of the program “Making Indonesia 4.0” in 2018 in socioeconomic and demographic aspects.

The INDI 4.0 assessment involved a self-evaluation by 622 companies across 13 industry sectors, subsequently verified by the Ministry of Industry. This study incorporates discussions with industry experts to enhance the interpretation of the analytical findings.

This study explores the interrelation among the components of INDI 4.0 across different levels, assessing the readiness of each sector for Industry 4.0. The findings reveal the diverse impact of implementing Industry 4.0 in Indonesia on socioeconomic and demographic aspects. Furthermore, the study proposes several policy recommendations for the Indonesian government’s consideration.

This study’s scope is confined to the industrial context of Indonesia, as the assessment components are tailored to the specific characteristics and culture of the country’s industry. Subsequent research endeavors can leverage this study as a foundational reference, adapting the components to align with the particular interests of other nations.

Businesses, especially those in Indonesia, can employ these findings to evaluate their position in the context of Industry 4.0 transformation compared to their industry. Simultaneously, the Indonesian government can use these results as a starting point to evaluate and potentially enhance their policies related to Industry 4.0. We recommend five policy proposals for the Indonesian government: diversifying measurement models, shifting terminology, emphasizing soft skills, promoting continuous learning and implementing Center of Digital Industry Indonesia 4.0 (PIDI 4.0) initiatives.

This study offers a broad impact of Industry 4.0 implementation in socioeconomic and demographic aspects in Indonesia, such as income, job-shifting, age, educational background and gender.

To the best of our knowledge, no prior research has explored the repercussions of industrial implementation on socioeconomic and demographic facets.