Search results

Effectively solving the large tonnage cable in the construction process due to the tensioning method of the inclined cable often appears in the overall cable force and the design value of the deviation is large, cable internal strand force is not uniform, the main girder stress exceeds the limit of the problem affecting the safety of the structure.

In this study, the finite element method and theoretical analysis method are utilized to propose a construction control method of tensioning the whole bunch of diagonal cables in two parts according to the deformation coordination relationship between the main girder and the diagonal cables. This methodology was implemented during the actual construction of the PAIRA Bridge in Bangladesh.

Tests conducted on cable-stayed bridges using this controlled tensioning method demonstrate that the measured cable strength of a single strand exhibits an error of less than 0.15% compared to the design target cable strength. The deviation between the measured and designed cable forces ranges from 0.16% to 0.27%. Furthermore, no tensile stress is observed in both the top plate and bottom plate of the root section of the main girder, indicating a state of full-section compression throughout the entire construction process.

Through the comparison with the test value, it can be proved that the whole bunch of diagonal cable tensioned in two parts of the construction control method proposed in this paper can make the internal strand force more uniform, to meet the precision requirements of the site construction, to protect the safety of the bridge construction process. The method proposed in this paper is highly accurate, easy to calculate, and has a high value of popularization and application.

We attempt to construct a grey three-way conflict analysis model with constraints to deal with correlated conflict problems with uncertain information.

In order to address these correlated conflict problems with uncertain information, considering the interactive influence and mutual restraints among agents and portraying their attitudes toward the conflict issues, we utilize grey numbers and three-way decisions to propose a grey three-way conflict analysis model with constraints. Firstly, based on the collected information, we introduced grey theory, calculated the degree of conflict between agents and then analyzed the conflict alliance based on the three-way decision theory. Finally, we designed a feedback mechanism to identify key agents and key conflict issues. A case verifies the effectiveness and practicability of the proposed model.

The results show that the proposed model can portray their attitudes toward conflict issues and effectively extract conflict-related information.

By employing this approach, we can provide the answers to Deja’s fundamental questions regarding Pawlak’s conflict analysis: “what are the underlying causes of conflict?” and “how can a viable consensus strategy be identified?”

The step effect and support structure generated by the manufacturing process of fused deposition molding parts increase the consumables cost and decrease the printing quality. Multiorientation printing helps improve the surface quality of parts and reduce support, but path interference exists between the printing layer and the layers printed. The purpose of this study is to design printing paths between different submodels to avoid interference when build orientation changed.

Considering support constraint, build orientation sequence is designed for submodels decomposed by model topology. The minimum printing angle between printing layers is analyzed. Initial path through the oriented bounding box is planned and slice interference relationship is then detected according to the projection topology mapping. Based on the relationship matrix of multiorientation slice, feasible path is calculated by directed graph (DG). Final printing path is determined under support constraint and checked by minimum printing angle. The simulation model of the robotic arm is established to verify the accessibility of printing path under the constraint of support and slice.

The proposed method can reduce support structure, decrease volume error and effectively solve the interference problem of the printing path for multiorientation slice.

The method based on projection topology mapping greatly improves the efficiency of interference detection. A feasible path calculated through DGs ensures the effectiveness of the printing path with the constraint of support and slice.

The purpose of this study is to examine how the childhood trauma experiences of CEOs influence firms’ internationalization.

The research used a difference-in-difference method with constructing a treatment group whose chief executive officer (CEO) experienced the great famine in China between the ages of 7 and 11, and a control group whose CEO was born within three years after 1961.

The study reveals a significant inverse correlation between CEOs’ childhood trauma experiences and firm internationalization. However, this correlation is weaker in the case of state-owned enterprises and firms led by CEOs with overseas work experience.

To the best of the authors’ knowledge, this study is the first to extend the theoretical framework to elucidate firms’ internationalization by introducing childhood trauma theory into the field of international business literature. Second, the authors link the literature on the effect of CEO explicit traits and psychological traits on firm internationalization by exploring how CEOs’ childhood trauma experience shapes their risk aversion, which, in turn, influences firm internationalization. Third, the authors address the call for examining the interplay of CEO life experiences by scrutinizing the moderating effect of CEO overseas work experience on the association between CEOs’ childhood trauma exposure and firm internationalization.

Accurately evaluating fluid flow behaviors and determining permeability for deforming porous media is time-consuming and remains challenging. This paper aims to propose a novel machine-learning method for the rapid estimation of permeability of porous media at different deformation stages constrained by hydro-mechanical coupling analysis.

A convolutional neural network (CNN) is proposed in this paper, which is guided by the results of finite element coupling analysis of equilibrium equation for mechanical deformation and Boltzmann equation for fluid dynamics during the hydro-mechanical coupling process [denoted as Finite element lattice Boltzmann model (FELBM) in this paper]. The FELBM ensures the Lattice Boltzmann analysis of coupled fluid flow with an unstructured mesh, which varies with the corresponding nodal displacement resulting from mechanical deformation. It provides reliable label data for permeability estimation at different stages using CNN.

The proposed CNN can rapidly and accurately estimate the permeability of deformable porous media, significantly reducing processing time. The application studies demonstrate high accuracy in predicting the permeability of deformable porous media for both the test and validation sets. The corresponding correlation coefficients (R²) is 0.93 for the validation set, and the R² for the test set A and test set B are 0.93 and 0.94, respectively.

This study proposes an innovative approach with the CNN to rapidly estimate permeability in porous media under dynamic deformations, guided by FELBM coupling analysis. The fast and accurate performance of CNN underscores its promising potential for future applications.

The global economy has been affected by the COVID-19 pandemic, which has placed greater responsibility on companies to fulfill their obligations to Corporate Social Responsibility (CSR) amid the crisis. This chapter investigates the role of a Chief Executive Officer (CEO) attributes in improving a firm's CSR in the emerging economy of Jordan and how the COVID-19 pandemic modifies this relationship. Using a Jordanian sample of 655 firm-year observations during the 2014–2021 period, the research results show that older CEOs, well-educated CEOs, CEOs' remuneration, and CEOs' ownership positively correlate with CSR reporting. However, long-tenured CEOs are associated with lower CSR initiatives. The subsample analysis findings also validate the significance of CEO attributes in improving CSR practice during the COVID-19 pandemic compared to the prepandemic period. These findings are beneficial for the regulatory setters to understand better whether CEO attributes are linked to engagement in CSR-related information. This research is among the limited number of studies that have explored how CEO attributes impact CSR reporting for the stakeholder's welfare. Moreover, it uniquely concentrated on contrasting the findings before and during the COVID-19 pandemic.

This study illustrates the economic and financial dynamics of the sector, analysing the evolution of the main ratios of profitability and financial structure of 1,559 Italian real estate companies divided into the three macro-regions: North, Centre and South, in the period 2011–2020. In this way, it is also possible to verify the responsiveness to the 2020 pandemic crisis.

The analysis uses descriptive statistics tools and the ANOVA method of analysis of variance, supplemented by the Tukey–Kramer test, to identify significant differences between the three Italian macro-regions.

The study shows the increase in profitability after the 2008 crisis, despite its reverberation in the years 2012–2013. The financial structure of companies improved almost everywhere. The pandemic had modest effects on performance.

In the future, other indices should be considered to gain a more comprehensive view. This is a quantitative study based on financial statements data that neglects other important economic and social factors.

Public policies could use this study for better interventions to support the sector. In addition, internal management can compare their company's performance with the industry average to identify possible improvements.

The research analyses an economic field that employs a large number of people, especially when considering the construction and real estate services covered by this analysis.

The study contributes to the literature by providing a quantitative analysis of industry dynamics, with comparative information that can be deduced from financial statements over the years.

This study aims to focus on the surface mount technology (SMT) mass production process of Sn-9Zn-2.5Bi-1.5In solder. It explores it with some components that will provide theoretical support for the industrial SMT application of Sn-Zn solder.

This study evaluates the properties of solder pastes and selects a more appropriate reflow parameter by comparing the microstructure of solder joints with different reflow soldering profile parameters. The aim is to provide an economical and reliable process for SMT production in the industry.

Solder paste wettability and solder ball testing in a nitrogen environment with an oxygen content of 3,000 ppm meet the requirements of industrial production. The printing performance of the solder paste is good and can achieve a printing rate of 100–160 mm/s. When soldering with a traditional stepped reflow soldering profile, air bubbles are generated on the surface of the solder joint, and there are many voids and defects in the solder joint. A linear reflow soldering profile reduces the residence time below the melting point of the solder paste (approximately 110 s). This reduces the time the zinc is oxidized, reducing solder joint defects. The joint strength of tin-zinc joints soldered with the optimized reflow parameters is close to that of Sn-58Bi and SAC305, with high joint strength.

This study attempts to industrialize the application of Sn-Zn solder and solves the problem that Sn-Zn solder paste is prone to be oxidized in the application and obtains the SMT process parameters suitable for Sn-9Zn-2.5Bi-1.5In solder.

This paper aims to conduct a systematic literature review on the fintech services and financial inclusion of the developing nations that particularly focuses on lower middle-income group nations (LMIGN) and upper middle-income group nations (UMIGN) to highlight the research areas that have not received attention and present opportunities for future research.

This paper adopts a systematic approach to examine 65 research articles published from 2016 to 2021, adhering to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines.

The study identifies research gaps in two key themes: backward and outward linkages. In backward linkages, the literature on UMIGN should pay attention to the behavioural patterns associated with lending, investment and market provision-related fintech services. Further research is needed to understand the relationship between fintech services on the usage and quality dimension of financial inclusion in both LMIGN and UMIGN. For outward linkages, future research work should explore the role of fintech and financial inclusion in the development of LMIGN. This study provides valuable insights and guides future research directions by comprehensively mapping the existing studies.

This study does not use quantitative tools, such as meta and bibliometric analysis, to validate the findings.

This research paper offers new perspectives that introduce a novel framework for analysing literature on fintech, financial inclusion and its impact on the overall development of UMIGN and LMIGN.

This paper aims to give an oversight of what is being done by researchers in GIS and remote sensing (field) to explore minerals. The main objective of this review is to explore how GIS and remote sensing have been beneficial in identifying mineral deposits for easier and cost-effective mining.

The approach of this research used Web of Science to generate a database of published articles on the application of GIS and remote sensing techniques for mineral exploration. The literature was further digested, noting the main findings, adopted method, illustration and research scales.

When applied alone, each technique seems effective, but it is important to know that combining different methods is more effective in identifying ore deposits.

This paper also examined and provided possible solutions to both current and future perspective issues relating to the application of GIS and remote sensing to mineral exploration. The authors believe that the conclusions and recommendations drawn from case studies and literature review will be of great importance to geoscientists and policymakers.