Search results

The soft stabilized slab and pile-supported (SSPS) embankment is an improvement technique to increase the efficiency of resources in road construction. To capture the effects of stabilized slabs on the stress transfer mechanism, the differential settlements and the lateral displacement of the embankment completely. A theoretical model of SSPS is proposed by considering the effect of soil arching and the interaction between the embankment fill, stabilized soil, pile, foundation soil and bearing stratum.

In the theoretical model, the stress and strain coordination relationship of the system was analyzed in view of the minimum potential energy theory and equal settlement plane theory. Subsequently, the theoretical method was applied to field tests for comparison. Finally, the influence of the elastic modulus and the thickness of the stabilized slab on the stress concentration ratio and foundation settlement were examined.

In addition to the experimental findings, the method has been revealed to be reasonable and feasible, considering its ability to effectively exploit the stabilized slab effect and improve the bearing capacity of soil and piles. An economical and reasonable arrangement scheme for the thickness and strength of stabilized slabs was obtained. The results reveal that the optimum elastic modulus was chosen as 28 MPa–60 MPa, and the optimum thickness of the stabilized slab was selected as 1.5 m–2.1 m using the parameters of field tests, which can provide guidance to engineering design.

An optimization calculation method is established to analyze the load transfer mechanics of the SSPS embankment based on a double-equal settlement plane. The model’s rationality was analyzed by comparing the settlement and stress concentration ratios in the field tests. Subsequently, the influence of the elastic modulus and the thickness of the stabilized slab on the stress concentration ratio and settlement were examined. An economical and reasonable arrangement scheme for the thickness and elastic modulus of stabilized slabs was obtained, which can provide a novel approach for engineering design.

Sustainable development is inseparable from rational and responsible use of resources and promotion of green entrepreneurship. The contemporary green development agenda encompasses climate, economic, technical, social, cultural, and political dimensions. International efforts to greening the global development are conducted by the major economies, including China as the world’s largest consumer of energy and the biggest emitter of greenhouse gases. China is aware of its environmental problems, as well as of its part of the overall responsibility for the accomplishment of the sustainable development goals. By means of the decarbonization efforts, the latter are integrated both into the national development agenda (the concept of ecological civilization) and China’s international initiatives (the greening narrative within the Belt and Road Initiative). Over the past decade, China has made a breakthrough on the way to promoting green entrepreneurship and greening of its development (better quality of air and water, renewable energy, electric vehicles, and organic farming). On the other hand, emissions remain high, agricultural land loses productivity, and freshwater resources degrade due to climate change. In conventional industries (oil, coal mining, and electric and thermal energy), decarbonization faces an array of impediments. In this chapter, the authors summarize fundamental provisions of China’s approach to building an ecological civilization and measures to reduce emissions and achieve the carbon neutrality status within the nearest decades. The analysis of obstacles to the decarbonization of the economy and possible prospects for the development of green entrepreneurship summarizes China’s practices for possible use in other countries.

The study examines how the three dimensions of homophily (attitude, background, and value) influence the perceived usefulness, credibility, and enjoyability of travel content and follower behavior (i.e. willingness to search for more information and intention to visit the destination and purchase the tourism product). Likewise, the study investigates how content perception influences follower behavior.

A sample of 621 Instagram users from generations Y and Z who follow at least one travel influencer and intend to travel in the next twelve months was collected through an online survey. Partial least squares structural equation modeling was adopted to examine the data.

Attitudinal homophily influences follower behavior, value homophily impacts content perception, and background homophily has a counterproductive effect. Likewise, content perceived as useful and credible induces the intention to visit and purchase the tourism product.

The generalization of the results must be performed with care, as the context of analysis is limited to a social platform and only includes Portuguese individuals.

The findings help managers better understand which homophily cues influence content perception and maximize influencer persuasion. Based on the results, they can better decide which travel influencers should endorse their tourism products.

Research on homophily has neglected the multidimensionality of the concept and its analysis in the tourism context. By using a consolidated approach to homophily, content perception, and follower behavior, this study contributes to the tourism marketing literature and expands influencer marketing research.

The purpose of this paper is to enhance the performance of robots in peg-in-hole assembly tasks, enabling them to swiftly and robustly accomplish the task. It also focuses on the robot’s ability to generalize across assemblies with different hole sizes.

Human behavior in peg-in-hole assembly serves as inspiration, where individuals visually locate the hole firstly and then continuously adjust the peg pose based on force/torque feedback during the insertion process. This paper proposes a novel framework that integrate visual servo and adjustment based on force/torque feedback, the authors use deep neural network (DNN) and image processing techniques to determine the pose of hole, then an incremental learning approach based on a broad learning system (BLS) is used to simulate human learning ability, the number of adjustments required for insertion process is continuously reduced.

The author conducted experiments on visual servo, adjustment based on force/torque feedback, and the proposed framework. Visual servo inferred the pixel position and orientation of the target hole in only about 0.12 s, and the robot achieved peg insertion with 1–3 adjustments based on force/torque feedback. The success rate for peg-in-hole assembly using the proposed framework was 100%. These results proved the effectiveness of the proposed framework.

This paper proposes a framework for peg-in-hole assembly that combines visual servo and adjustment based on force/torque feedback. The assembly tasks are accomplished using DNN, image processing and BLS. To the best of the authors’ knowledge, no similar methods were found in other people’s work. Therefore, the authors believe that this work is original.

This paper aims to develop a robust navigation enhancement framework to handle one of the most urgent needs for real applications of autonomous vehicles nowadays, as these corner cases act as the most commonly occurred risks in potential self-driving accidents.

In this paper, the main idea is to fully exploit the consistent features among spatio-temporal data and thus detect the anomalies and build residual channels to reconstruct the abnormal information. The authors first develop an anomaly detection algorithm, then followed by a corresponding disturbed information reconstruction network which has strong robustness to address both the nature disturbances and external attacks. Finally, the authors introduce a fully end-to-end resilient navigation performance enhancement framework to improve the driving performance of existing self-driving models under attacks and disturbances.

Comparison results on CARLA platform and real experiments demonstrate strong resilience of the authors’ approach which enhances the navigation performance under disturbances and attacks.

Reliable and resilient navigation performance under various nature disturbances and even external attacks is one of the most urgent needs for real applications of autonomous vehicles nowadays, as these corner cases act as the most commonly occurred risks in potential self-driving accidents. The information reconstruction approach provides a resilient navigation performance enhancement method for existing self-driving models.

The aim of this paper is to review the literature on the prediction of cutting tool life. Tool life is typically estimated by predicting the time to reach the threshold flank wear width. The cutting tool is a crucial component in any machining process, and its failure affects the manufacturing process adversely. The prediction of cutting tool life by considering several factors that affect tool life is crucial to managing quality, cost, availability and waste in machining processes.

This study has undertaken the critical analysis and summarisation of various techniques used in the literature for predicting the life or remaining useful life (RUL) of the cutting tool through monitoring the tool wear, primarily flank wear. The experimental setups that comprise diversified machining processes, including turning, milling, drilling, boring and slotting, are covered in this review.

Cutting tool life is a stochastic variable. Tool failure depends on various factors, including the type and material of the cutting tool, work material, cutting conditions and machine tool. Thus, the life of the cutting tool for a particular experimental setup must be modelled by considering the cutting parameters.

This submission discusses tool life prediction comprehensively, from monitoring tool wear, primarily flank wear, to modelling tool life, and this type of comprehensive review on cutting tool life prediction has not been reported in the literature till now. The future suggestions provided in this review are expected to provide avenues to solve the unexplored challenges in this field.

By studying the green development efficiency (GDE) of 33 cities in the provinces of Jiangsu, Zhejiang, and Fujian in China, this study strives to conduct an analysis of the sustainable practices implemented in these developed regions, and derive valuable insights that can foster the promotion of green transformation.

First, the urban green development system (GDS) was decomposed into the economic benefit subsystem (EBS), social benefit subsystem (SBS), and pollution control subsystem (PCS). Then, a mixed network SBM model was proposed to evaluate the GDE during 20152020, with Moran’s I and Bootstrap truncated regression model subsequently applied to measure the spatial characteristics and driving factors of efficiency.

Subsystem efficiency presents a distribution trend of PCS > EBS > SBS. There is a particular spatial aggregation effect in EBS efficiency, whereas SBS and PCS efficiencies have no significant spatial autocorrelation. Furthermore, urbanization level contributes significantly to the efficiency of all subsystems; industrial structure, energy consumption, and technological innovation play a crucial role in EBS and SBS; external openness is a pivotal factor in SBS; and environmental regulation has a significant effect on PCS.

This study further decomposes the black box of GDS into subsystems including the economy, society, and environment. Additionally, by employing a mixed network SBM model and Bootstrap truncated regression model to investigate efficiency and its driving factors from the subsystem perspective, it endeavors to derive more detailed research conclusions and policy implications.

The purpose of this paper is to study the aerodynamic characteristics of Ahmed body in longitudinal and lateral platoons under crosswind by computational fluid dynamics simulation. It helps to improve the aerodynamic characteristics of vehicles by providing theoretical basis and engineering direction for the development and progress of intelligent transportation.

A two-car platoon model is used to compare with the experiment to prove the accuracy of the simulation method. The simplified Ahmed body model and the Reynolds Averaged N-S equation method are used to study the aerodynamic characteristics of vehicles at different distances under cross-winds.

When the longitudinal distance x/L = 0.25, the drag coefficients of the middle and trailing cars at β = 30° are improved by about 272% and 160% compared with β = 10°. The side force coefficients of the middle and trailing cars are increased by 50% and 62%. When the lateral distance y/W = 0.25, the side force coefficients of left and middle cars at β = 30° are reduced by 38% and 37.5% compared with β = 10°. However, the side force coefficient of the right car are increased by about 84.3%.

Most of the researches focus on the overtaking process, and there are few researches on the neat lateral platoon. The innovation of this paper is that in addition to studying the aerodynamic characteristics of longitudinal driving, the aerodynamic characteristics of neat lateral driving are also studied, and crosswind conditions are added. The authors hope to contribute to the development of intelligent transportation.