Search results

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of this paper is to further optimize the line spacing to improve the performance of meanders for sensor application.

The model of GMI effect of microribbon with meander type is established. The effect of line spacing (Ls) on GMI behavior in meanders is analyzed systematically.

Comparison of theory and experiment indicates that decreasing the line spacing increases the negative mutual inductance and a consequent increase in the GMI effect. The maximum value of the GMI ratio increases from 69% to 91.8% (simulation results) and 16.9% to 51.4% (experimental results) when the line spacing is reduced from 400 to 50 µm. The contribution of line spacing versus line width to the GMI ratio of microribbon with meander type was contrasted. This behavior of the GMI ratio is dominated by the overall negative contribution of the mutual inductance.

This paper explores the effect of line spacing on the GMI ratio of meander type by comparing the simulation results with the experimental results. The superior line spacing is found in the identical sensing area. The findings will contribute to the design of high-performance micropatterned ribbon with meander-type GMI sensors and the establishment of a ribbon-based magnetic-sensitive biosensing system.

Surface acoustic wave (SAW) sensors have attracted great attention worldwide for a variety of applications in measuring physical, chemical and biological parameters. However, stability has been one of the key issues which have limited their effective commercial applications. To fully understand this challenge of operation stability, this paper aims to systematically review mechanisms, stability issues and future challenges of SAW sensors for various applications.

This review paper starts with different types of SAWs, advantages and disadvantages of different types of SAW sensors and then the stability issues of SAW sensors. Subsequently, recent efforts made by researchers for improving working stability of SAW sensors are reviewed. Finally, it discusses the existing challenges and future prospects of SAW sensors in the rapidly growing Internet of Things-enabled application market.

A large number of scientific articles related to SAW technologies were found, and a number of opportunities for future researchers were identified. Over the past 20 years, SAW-related research has gained a growing interest of researchers. SAW sensors have attracted more and more researchers worldwide over the years, but the research topics of SAW sensor stability only own an extremely poor percentage in the total researc topics of SAWs or SAW sensors.

Although SAW sensors have been attracting researchers worldwide for decades, researchers mainly focused on the new materials and design strategies for SAW sensors to achieve good sensitivity and selectivity, and little work can be found on the stability issues of SAW sensors, which are so important for SAW sensor industries and one of the key factors to be mature products. Therefore, this paper systematically reviewed the SAW sensors from their fundamental mechanisms to stability issues and indicated their future challenges for various applications.

This study aims to investigate the impact of housing knowledge, housing challenges and housing policy on the renting intention and satisfaction of young people.

A questionnaire survey helped collect data from young people in the study area, which were then analysed using the Statistical Package for the Social Sciences (SPSS) 27 software. A descriptive analysis and the Cronbach’s alpha test were adopted to analyse the data. The confirmatory factor analysis confirmed a significant relationship between housing knowledge, housing challenges and housing policy and renting intention and satisfaction.

The overall findings revealed that most young people intend to own a home one day, and a minority of them decided to continue renting. The findings suggest that there is a significant relationship between housing knowledge and housing intention. However, housing challenges and housing policies do not appear to impact renting intentions. On the other hand, housing knowledge and housing challenges were found to be associated with housing satisfaction, while housing policy does not show a significant relationship.

This study, however, poses limitations as it uses a limited model and location and involves only a cross-sectional study. Future studies can use the methodology used in this study to conduct further investigations on housing intention and satisfaction in other regions of the country, thereby validating the findings of this study.

In terms of practical implications, this study has made a valuable contribution to the field of housing literature by shedding light on two crucial elements, namely, housing intention and satisfaction, which have been understudied. Understanding the determinants of housing intention and satisfaction is vital in efforts to implement appropriate policy reforms.

Findings from this study offer valuable insight related to managerial and practical implications, with the former implicating a need to prioritise initiatives that enhance renters’ housing knowledge. Implementing educational programmes and providing accessible resources can empower renters with a better understanding of the rental process and other important housing information.

This paper is relevant because it provides a guideline for policymakers to initiate regulations concerning housing and implement appropriate policy reforms. This study can also help housing providers develop more affordable housing that meets the needs of young people currently renting because most have expressed their housing intentions. Understanding housing intention and satisfaction determinants is vital to implementing appropriate policy reforms.

This study aims to fill this research gap by providing a comprehensive exploration of the transnationalization of higher education in China and Asia, with a particular focus on how institutions maintain quality assurance and how student learning experiences are reported.

The transnationalization of higher education involves educational programs and services provided by institutions or universities in a country other than their home country where students from diverse countries are trained. The goal of transnational education is to offer higher education to students who face obstacles in physically entering the host country of a transnational program, encourage globalization, enhance cross-cultural communication and improve the quality of education by expanding students' learning opportunities, providing diverse educational experiences and elevating academic standards. The transnationalization of higher education has become a crucial endeavor in Asia, especially in countries such as China, Malaysia and Singapore, where rapid economic development and globalization have prompted the need to evolve into knowledge-driven economies to meet the increasing demand for higher education. The factors driving the expansion of transnational higher education in China and Asia include the desire for top-quality education, the allure of international students, the establishment of worldwide collaborations and aspirations to be recognized as centers of academic distinction. The rapid expansion and increasing importance of transnational higher education has underscored the vital role of quality assurance. To guarantee educational quality, maintain institutional reputation and improve overall student outcomes, several agencies and frameworks have been established to uphold international standards.

Based upon extensive literature reveiw and case analysis, our findings indicated the quality assurance assessment varies and is primarily influenced by host countries and provider polices. However, students in transnational higher education programs report satisfaction with their experienes and the quality of their programs, which tends to meet their expecations.

This study presents the first comprehsensive literatrue rewiew and case analysis of how transnational higher education in China, Sinapore, Malaysia and Vietnam uphold quality assurance and report students learning experiences. Additionally, the findings highlight why future researceh on this topic is crucial and why forestering colloboration among countries in Asian regions is imporant in term of growing geo-politics.

Occupant behavior can lead to considerable uncertainties in thermal comfort and air quality within buildings. To tackle this challenge, the use of probabilistic controls to simulate occupant behavior has emerged as a potential solution. This study seeks to analyze the performance of free-running households by examining adaptive thermal comfort and CO2 concentration, both crucial variables in indoor air quality. The investigation of indoor environment dynamics caused by the occupants' behavior, especially after the COVID-19 pandemic, became increasingly important. Specifically, it investigates 13 distinct window and shading control strategies in courtyard houses to identify the factors that prompt occupants to interact with shading and windows and determine which control approach effectively minimizes the performance gap.

This paper compares commonly used deterministic and probabilistic control functions and their effects on occupant comfort and indoor air quality in four zones surrounding a courtyard. The zones are differentiated by windows facing the courtyard. The study utilizes the energy management system (EMS) functionality of EnergyPlus within an algorithmic interface called Ladybug Tools. By modifying geometrical dimensions, orientation, window-to-wall ratio (WWR) and window operable fraction, a total of 465 cases are analyzed to identify effective control scenarios. According to the literature, these factors were selected because of their potential significant impact on occupants’ thermal comfort and indoor air quality, in addition to the natural ventilation flow rate. Additionally, the Random Forest algorithm is employed to estimate the individual impact of each control scenario on indoor thermal comfort and air quality metrics, including operative temperature and CO2 concentration.

The findings of the study confirmed that both deterministic and probabilistic window control algorithms were effective in reducing thermal discomfort hours, with reductions of 56.7 and 41.1%, respectively. Deterministic shading controls resulted in a reduction of 18.5%. Implementing the window control strategies led to a significant decrease of 87.8% in indoor CO2 concentration. The sensitivity analysis revealed that outdoor temperature exhibited the strongest positive correlation with indoor operative temperature while showing a negative correlation with indoor CO2 concentration. Furthermore, zone orientation and length were identified as the most influential design variables in achieving the desired performance outcomes.

It’s important to acknowledge the limitations of this study. Firstly, the potential impact of air circulation through the central zone was not considered. Secondly, the investigated control scenarios may have different impacts on air-conditioned buildings, especially when considering energy consumption. Thirdly, the study heavily relied on simulation tools and algorithms, which may limit its real-world applicability. The accuracy of the simulations depends on the quality of the input data and the assumptions made in the models. Fourthly, the case study is hypothetical in nature to be able to compare different control scenarios and their implications. Lastly, the comparative analysis was limited to a specific climate, which may restrict the generalizability of the findings in different climates.

Occupant behavior represents a significant source of uncertainty, particularly during the early stages of design. This study aims to offer a comparative analysis of various deterministic and probabilistic control scenarios that are based on occupant behavior. The study evaluates the effectiveness and validity of these proposed control scenarios, providing valuable insights for design decision-making.

The purpose of this paper is to investigate the relationship between tax avoidance and earnings persistence in the light of a developing economy, with the main focus on China.

In the analysis, the author conducts a survey on the tax avoidance situation of Chinese listed companies from 2012 to 2020. Then, a multivariate regression analysis is performed in order to analyse the relationship between corporate tax avoidance and earnings persistence.

The findings of the present study show that tax avoidance has a significant positive effect on earnings persistence. However, when the degree of tax avoidance is high, the “risk effect” of tax avoidance exceeds the “value effect”, and tax avoidance will reduce the persistence of earnings. This conclusion is even more prominent when the company is non-state-owned. Further research shows the increase of institutional investors’ shareholding ratio can improve “value effect” of tax avoidance, lessen “risk effect” of tax avoidance, and positively affect the relationship between tax avoidance and earnings persistence.

This study provides evidence for investors to understand the dual effect of tax avoidance on earnings persistence. The results may have implications for regulatory bodies. They can provide a better understanding of the corporate governance role of institutional investors in curbing opportunistic tax avoidance.

This study enriches the research on tax avoidance effects by analysing the impact of tax avoidance on earnings persistence. This study also compensates for the shortcomings of analysing earnings persistence mainly from the perspective of tax differences in the past, and promotes the study of the corporate governance effects of institutional investors under different levels of tax avoidance.

This study aims to focus on the surface mount technology (SMT) mass production process of Sn-9Zn-2.5Bi-1.5In solder. It explores it with some components that will provide theoretical support for the industrial SMT application of Sn-Zn solder.

This study evaluates the properties of solder pastes and selects a more appropriate reflow parameter by comparing the microstructure of solder joints with different reflow soldering profile parameters. The aim is to provide an economical and reliable process for SMT production in the industry.

Solder paste wettability and solder ball testing in a nitrogen environment with an oxygen content of 3,000 ppm meet the requirements of industrial production. The printing performance of the solder paste is good and can achieve a printing rate of 100–160 mm/s. When soldering with a traditional stepped reflow soldering profile, air bubbles are generated on the surface of the solder joint, and there are many voids and defects in the solder joint. A linear reflow soldering profile reduces the residence time below the melting point of the solder paste (approximately 110 s). This reduces the time the zinc is oxidized, reducing solder joint defects. The joint strength of tin-zinc joints soldered with the optimized reflow parameters is close to that of Sn-58Bi and SAC305, with high joint strength.

This study attempts to industrialize the application of Sn-Zn solder and solves the problem that Sn-Zn solder paste is prone to be oxidized in the application and obtains the SMT process parameters suitable for Sn-9Zn-2.5Bi-1.5In solder.