Search results

This paper aims to present a novel scheme for imposing periodic boundary conditions with downscaled macroscopic strain measures of gradient Cosserat continuum on the representative volume element (RVE) of discrete particle assembly in the frame of the second-order computational homogenization methods for granular materials.

The proposed scheme is based on the generalized Hill’s lemma of gradient Cosserat continuum and the incremental non-linear constitutive relation condensed to the peripheral particles of the RVE of discrete particle assembly. The generalized Hill’s lemma conducts to downscale the macroscopic strain or stress measures and to impose the periodic boundary conditions on the RVE boundary so that the Hill-Mandel energy equivalence condition is ensured. Because of the incremental non-linear constitutive relation condensed to the peripheral particles of the RVE, the periodic boundary displacement and traction constraints together with the downscaled macroscopic strains and strain gradients, micro-rotations and curvatures are imposed in the point-wise sense without the need of introducing the Lagrange multipliers for enforcing the periodic boundary displacement and traction constraints in a weak sense.

Numerical results demonstrate that the applicability and effectiveness of the proposed scheme in imposing the periodic boundary conditions on the RVE. The results of the RVE subjected to the periodic boundary conditions together with the displacement boundary conditions in the second-order computational homogenization for granular materials provide the desired estimations, which lie between the upper and the lower bounds provided by the displacement and the traction boundary conditions imposed on the RVE respectively.

Each grain in the particulate system under consideration is assumed to be rigid and circular.

The proposed scheme for imposing periodic boundary conditions on the RVE can be adopted solely for estimating the effective mechanical properties of granular materials and/or integrated into the frame of the second-order computational homogenization method with a nested finite element method-discrete element method solution procedure for granular materials. It will tend to provide, at least theoretically, more reasonable results for effective material properties and solutions of a macroscopic boundary value problem simulated by the computational homogenization method.

This paper presents a novel scheme for imposing periodic boundary conditions with downscaled macroscopic strain measures of gradient Cosserat continuum on the RVE of discrete particle assembly for granular materials without need of introducing Lagrange multipliers for enforcing periodic boundary conditions in a weak (integration) sense.

This paper aims to propose a robotic automation system for processing special-shaped thin-walled workpieces, which includes a measurement part and a processing part.

In the measurement part, to efficiently and accurately realize the three-dimensional camera hand-eye calibration based on a large amount of measurement data, this paper improves the traditional probabilistic method. To solve the problem of time-consuming in the extraction of point cloud features, this paper proposes a point cloud feature extraction method based on seed points. In the processing part, the authors design a new type of chamfering tool. During the process, the robot adopts admittance control to perform compensation according to the feedback of four sensors mounted on the tool.

Experiments show that the proposed system can make the tool smoothly fit the chamfered edge during processing and the machined chamfer meets the processing requirements of 0.5 × 0.5 to 0.9 × 0.9 mm².

The proposed design and approach can be applied on many types of special-shaped thin-walled parts. This will give a new solution for the automation integration problem in aerospace manufacturing.

A novel robotic automation system for processing special-shaped thin-walled workpieces is proposed and a new type of chamfering tool is designed. Furthermore, a more accurate probabilistic hand-eye calibration method and a more efficient point cloud extraction method are proposed, which are suitable for this system when comparing with the traditional methods.

In this essay, a new NDAGM(1,N,α) power model is recommended to resolve the hassle of the distinction between old and new information, and the complicated nonlinear traits between sequences in real behavior systems.

Firstly, the correlation aspect sequence is screened via a grey integrated correlation degree, and the damped cumulative generating operator and power index are introduced to define the new model. Then the non-structural parameters are optimized through the genetic algorithm. Finally, the pattern is utilized for the prediction of China’s natural gas consumption, and in contrast with other models.

By altering the unknown parameters of the model, theoretical deduction has been carried out on the newly constructed model. It has been discovered that the new model can be interchanged with the traditional grey model, indicating that the model proposed in this article possesses strong compatibility. In the case study, the NDAGM(1,N,α) power model demonstrates superior integrated performance compared to the benchmark models, which indirectly reflects the model’s heightened sensitivity to disparities between new and old information, as well as its ability to handle complex linear issues.

This paper provides a scientifically valid forecast model for predicting natural gas consumption. The forecast results can offer a theoretical foundation for the formulation of national strategies and related policies regarding natural gas import and export.

The primary contribution of this article is the proposition of a grey multivariate prediction model, which accommodates both new and historical information and is applicable to complex nonlinear scenarios. In addition, the predictive performance of the model has been enhanced by employing a genetic algorithm to search for the optimal power exponent.

This paper aims to develop a finite element analysis strategy, which is suitable for the analysis of progressive failure that occurs in pressure-dependent materials in practical engineering problems.

The numerical difficulties stemming from the strain-softening behaviour of the frictional material, which is represented by a non-associated Drucker–Prager material model, is tackled using the Cosserat continuum theory, while the mixed finite element formulation based on Hu–Washizu variational principle is adopted to allow the utilization of low-order finite elements.

The effectiveness and robustness of the low-order finite element are verified, and the simulation for a real-world landslide which occurred at the upstream side of Carsington embankment in Derbyshire reconfirms the advantages of the developed elastoplastic Cosserat continuum scheme in capturing the entire progressive failure process when the strain-softening and the non-associated plastic law are involved.

The permit of using low-order finite elements is of great importance to enhance computational efficiency for analysing large-scale engineering problems. The case study reconfirms the advantages of the developed elastoplastic Cosserat continuum scheme in capturing the entire progressive failure process when the strain-softening and the non-associated plastic law are involved.

The purpose of this study is to improve the computational efficiency and accuracy of fatigue reliability analysis.

By absorbing the advantages of Markov chain and active Kriging model into the hierarchical collaborative strategy, an enhanced active Kriging-based hierarchical collaborative model (DCEAK) is proposed.

The analysis results show that the proposed DCEAK method holds high accuracy and efficiency in dealing with fatigue reliability analysis with high nonlinearity and small failure probability.

The effectiveness of the presented method in more complex reliability analysis problems (i.e. noisy problems, high-dimensional issues etc.) should be further validated.

The current efforts can provide a feasible way to analyze the reliability performance and identify the sensitive variables in aeroengine mechanisms.

To improve the computational efficiency and accuracy of fatigue reliability analysis, an enhanced active DCEAK is proposed and the corresponding fatigue reliability framework is established for the first time.

As an advanced calculation methodology, reliability-based multidisciplinary design optimization (RBMDO) has been widely acknowledged for the design problems of modern complex engineering systems, not only because of the accurate evaluation of the impact of uncertain factors but also the relatively good balance between economy and safety of performance. However, with the increasing complexity of engineering technology, the proposed RBMDO method gradually cannot effectively solve the higher nonlinear coupled multidisciplinary uncertainty design optimization problems, which limits the engineering application of RBMDO. Many valuable works have been done in the RBMDO field in recent decades to tackle the above challenges. This study is to review these studies systematically, highlight the research opportunities and challenges, and attempt to guide future research efforts.

This study presents a comprehensive review of the RBMDO theory, mainly including the reliability analysis methods of different uncertainties and the decoupling strategies of RBMDO.

First, the multidisciplinary design optimization (MDO) preliminaries are given. The basic MDO concepts and the corresponding mathematical formulas are illustrated. Then, the procedures of three RBMDO methods with different reliability analysis strategies are introduced in detail. These RBMDO methods were proposed for the design optimization problems under different uncertainty types. Furtherly, an optimization problem for a certain operating condition of a turbine runner blade is introduced to illustrate the engineering application of the above method. Finally, three aspects of future challenges for RBMDO, namely, time-varying uncertainty analysis; high-precision surrogate models, and verification, validation and accreditation (VVA) for the model, are discussed followed by the conclusion.

The scope of this study is to introduce the RBMDO theory systematically. Three commonly used RBMDO-SORA methods are reviewed comprehensively, including the methods' general procedures and mathematical models.

The theoretical findings serve as a foundation for further research into understanding sulfide-based solid-state electrolytes, ultimately advancing the progress of all-solid-state batteries.

The electronic properties of Li₇P₃S₁₁ are thoroughly explored through first-principles calculations.

This investigation encompasses the intricate atom-dominated valence and conduction bands, spatial charge density distribution and the breakdown of atom and orbital contributions to van Hove singularities. Additionally, the compound’s wide and discrete energy spectra reflect the substantial variations in bond lengths and its highly anisotropic geometric structure. The complex and nonuniform chemical environment indicates the presence of intricate hopping integrals.

This study provides valuable insights into the critical multiorbital hybridizations occurring in the Li-S and P-S chemical bonds. To validate the theoretical predictions, experimental techniques can be employed. By combining theoretical predictions with experimental data, a comprehensive understanding of the geometric and electronic characteristics of Li₇P₃S₁₁ can be achieved.

This study aims to predict China's carbon emission intensity and put forward a set of policy recommendations for further development of a low-carbon economy in China.

In this paper, the Interaction Effect Grey Power Model of N Variables (IEGPM(1,N)) is developed, and the Dragonfly algorithm (DA) is used to select the best power index for the model. Specific model construction methods and rigorous mathematical proofs are given. In order to verify the applicability and validity, this paper compares the model with the traditional grey model and simulates the carbon emission intensity of China from 2014 to 2021. In addition, the new model is used to predict the carbon emission intensity of China from 2022 to 2025, which can provide a reference for the 14th Five-Year Plan to develop a scientific emission reduction path.

The results show that if the Chinese government does not take effective policy measures in the future, carbon emission intensity will not achieve the set goals. The IEGPM(1,N) model also provides reliable results and works well in simulation and prediction.

The paper considers the nonlinear and interactive effect of input variables in the system's behavior and proposes an improved grey multivariable model, which fills the gap in previous studies.

Engineering components/structures with geometric discontinuities normally bear complex and variable loads, which lead to a multiaxial and random/variable amplitude stress/strain state. Hence, this study aims how to effectively evaluate the multiaxial random/variable amplitude fatigue life.

Recent studies on critical plane method under multiaxial random/variable amplitude loading are reviewed, and the computational framework is clearly presented in this paper.

Some basic concepts and latest achievements in multiaxial random/variable amplitude fatigue analysis are introduced. This review summarizes the research status of four main aspects of multiaxial fatigue under random/variable amplitude loadings, namely multiaxial fatigue criterion, method for critical plane determination, cycle counting method and damage accumulation criterion. Particularly, the latest achievements of multiaxial random/variable amplitude fatigue using critical plane methods are classified and highlighted.

This review attempts to provide references for further research on multiaxial random/variable amplitude fatigue and to promote the development of multiaxial fatigue from experimental research to practical engineering application.

The purpose of this paper is to focus on an optimizing maintenance policy with repair limit time for a new type of aircraft component, in which the lifetime is assumed to be an uncertain variable due to no historical operation data, and the repair time is a random variable that can be described by the experimental data.

To describe this repair limit time policy over an infinite time horizon, an extended uncertain random renewal reward theorem is firstly proposed based on chance theory, involves uncertain random interarrival times and stochastic rewards. Accordingly, the uncertain random programming model, which minimized the expected maintenance cost rate, is formulated to find the optimal repair limit time.

A numerical example with sensitivity analysis is provided to illustrate the utility of the proposed policy. It provides a useful reference and guidance for aircraft optimization. For maintainers, it plays an important guiding role in engineering practice.

The proposed uncertain random renewal reward process proved useful for the optimization of maintenance strategy with maintenance limited time for a new type of aircraft components, which provides scientific support for aircraft maintenance decision-making for civil aviation enterprises.