Search results

It is of a great significance for the health monitoring of a liquid rocket engine to build an accurate and reliable fault prediction model. The thrust of a liquid rocket engine is an important indicator for its health monitoring. By predicting the changing value of the thrust, it can be judged whether the engine will fail at a certain time. However, the thrust is affected by various factors, and it is difficult to establish an accurate mathematical model. Thus, this study uses a mixture non-parametric regression prediction model to establish the model of the thrust for the health monitoring of a liquid rocket engine.

This study analyzes the characteristics of the least squares support vector regression (LS-SVR) machine . LS-SVR is suitable to model on the small samples and high dimensional data, but the performance of LS-SVR is greatly affected by its key parameters. Thus, this study implements the advanced intelligent algorithm, the real double-chain coding target gradient quantum genetic algorithm (DCQGA), to optimize these parameters, and the regression prediction model LSSVRDCQGA is proposed. Then the proposed model is used to model the thrust of a liquid rocket engine.

The simulation results show that: the average relative error (ARE) on the test samples is 0.37% when using LS-SVR, but it is 0.3186% when using LSSVRDCQGA on the same samples.

The proposed model of LSSVRDCQGA in this study is effective to the fault prediction on the small sample and multidimensional data, and has a certain promotion.

The original contribution of this study is to establish a mixture non-parametric regression prediction model of LSSVRDCQGA and properly resolve the problem of the health monitoring of a liquid rocket engine along with modeling the thrust of the engine by using LSSVRDCQGA.

Artificial Intelligence (AI) is an emerging technology and turned into a field of knowledge that has been consistently displacing technologies for a change in human life. It is applied in all spheres of life as reflected in the review of the literature section here. As applicable in the field of libraries too, this study scientifically mapped the papers on AAIL and analyze its growth, collaboration network, trending topics, or research hot spots to highlight the challenges and opportunities in adopting AI-based advancements in library systems and processes.

The study was developed with a bibliometric approach, considering a decade, 2012 to 2021 for data extraction from a premier database, Scopus. The steps followed are (1) identification, selection of keywords, and forming the search strategy with the approval of a panel of computer scientists and librarians and (2) design and development of a perfect algorithm to verify these selected keywords in title-abstract-keywords of Scopus (3) Performing data processing in some state-of-the-art bibliometric visualization tools, Biblioshiny R and VOSviewer (4) discussing the findings for practical implications of the study and limitations.

As evident from several papers, not much research has been conducted on AI applications in libraries in comparison to topics like AI applications in cancer, health, medicine, education, and agriculture. As per the Price law, the growth pattern is exponential. The total number of papers relevant to the subject is 1462 (single and multi-authored) contributed by 5400 authors with 0.271 documents per author and around 4 authors per document. Papers occurred mostly in open-access journals. The productive journal is the Journal of Chemical Information and Modelling (NP = 63) while the highly consistent and impactful is the Journal of Machine Learning Research (z-index=63.58 and CPP = 56.17). In the case of authors, J Chen (z-index=28.86 and CPP = 43.75) is the most consistent and impactful author. At the country level, the USA has recorded the highest number of papers positioned at the center of the co-authorship network but at the institutional level, China takes the 1st position. The trending topics of research are machine learning, large dataset, deep learning, high-level languages, etc. The present information system has a high potential to improve if integrated with AI technologies.

The number of scientific papers has increased over time. The evolution of themes like machine learning implicates AI as a broad field of knowledge that converges with other disciplines. The themes like large datasets imply that AI may be applied to analyze and interpret these data and support decision-making in public sector enterprises. Theme named high-level language emerged as a research hotspot which indicated that extensive research has been going on in this area to improve computer systems for facilitating the processing of data with high momentum. These implications are of high strategic worth for policymakers, library stakeholders, researchers and the government as a whole for decision-making.

The analysis of collaboration, prolific authors/journals using consistency factor and CPP, testing the relationship between consistency (z-index) and impact (h-index), using state-of-the-art network visualization and cluster analysis techniques make this study novel and differentiates it from the traditional bibliometric analysis. To the best of the author's knowledge, this work is the first attempt to comprehend the research streams and provide a holistic view of research on the application of AI in libraries. The insights obtained from this analysis are instrumental for both academics and practitioners.

For some years now, Cameroon has seen a significant increase in its electricity demand, and this need is bound to grow within the next few years owing to the current economic growth and the ambitious projects underway. Therefore, one of the state's priorities is the mastery of electricity demand. In order to get there, it would be helpful to have reliable forecasting tools. This study proposes a novel version of the discrete grey multivariate convolution model (ODGMC(1,N)).

Specifically, a linear corrective term is added to its structure, parameterisation is done in a way that is consistent to the modelling procedure and the cumulated forecasting function of ODGMC(1,N) is obtained through an iterative technique.

Results show that ODGMC(1,N) is more stable and can extract the relationships between the system's input variables. To demonstrate and validate the superiority of ODGMC(1,N), a practical example drawn from the projection of electricity demand in Cameroon till 2030 is used. The findings reveal that the proposed model has a higher prediction precision, with 1.74% mean absolute percentage error and 132.16 root mean square error.

These interesting results are due to (1) the stability of ODGMC(1,N) resulting from a good adequacy between parameters estimation and their implementation, (2) the addition of a term that takes into account the linear impact of time t on the model's performance and (3) the removal of irrelevant information from input data by wavelet transform filtration. Thus, the suggested ODGMC is a robust predictive and monitoring tool for tracking the evolution of electricity needs.

Limited by the types of sensors, the state information available for musculoskeletal robots with highly redundant, nonlinear muscles is often incomplete, which makes the control face a bottleneck problem. The aim of this paper is to design a method to improve the motion performance of musculoskeletal robots in partially observable scenarios, and to leverage the ontology knowledge to enhance the algorithm’s adaptability to musculoskeletal robots that have undergone changes.

A memory and attention-based reinforcement learning method is proposed for musculoskeletal robots with prior knowledge of muscle synergies. First, to deal with partially observed states available to musculoskeletal robots, a memory and attention-based network architecture is proposed for inferring more sufficient and intrinsic states. Second, inspired by muscle synergy hypothesis in neuroscience, prior knowledge of a musculoskeletal robot’s muscle synergies is embedded in network structure and reward shaping.

Based on systematic validation, it is found that the proposed method demonstrates superiority over the traditional twin delayed deep deterministic policy gradients (TD3) algorithm. A musculoskeletal robot with highly redundant, nonlinear muscles is adopted to implement goal-directed tasks. In the case of 21-dimensional states, the learning efficiency and accuracy are significantly improved compared with the traditional TD3 algorithm; in the case of 13-dimensional states without velocities and information from the end effector, the traditional TD3 is unable to complete the reaching tasks, while the proposed method breaks through this bottleneck problem.

In this paper, a novel memory and attention-based reinforcement learning method with prior knowledge of muscle synergies is proposed for musculoskeletal robots to deal with partially observable scenarios. Compared with the existing methods, the proposed method effectively improves the performance. Furthermore, this paper promotes the fusion of neuroscience and robotics.

Ensuring the safety of structures is important. However, when a structure possesses both an implicit performance function and an extremely small failure probability, traditional methods struggle to conduct a reliability analysis. Therefore, this paper proposes a reliability analysis method aimed at enhancing the efficiency of rare event analysis, using the widely recognized Relevant Vector Machine (RVM).

Drawing from the principles of importance sampling (IS), this paper employs Harris Hawks Optimization (HHO) to ascertain the optimal design point. This approach not only guarantees precision but also facilitates the RVM in approximating the limit state surface. When the U learning function, designed for Kriging, is applied to RVM, it results in sample clustering in the design of experiment (DoE). Therefore, this paper proposes a FU learning function, which is more suitable for RVM.

Three numerical examples and two engineering problem demonstrate the effectiveness of the proposed method.

By employing the HHO algorithm, this paper innovatively applies RVM in IS reliability analysis, proposing a novel method termed RVM-HIS. The RVM-HIS demonstrates exceptional computational efficiency, making it eminently suitable for rare events reliability analysis with implicit performance function. Moreover, the computational efficiency of RVM-HIS has been significantly enhanced through the improvement of the U learning function.

Vertical electrical sounding (VES) and Rayleigh wave exploration are widely used in the exploration of near-surface structure, but both have limitations. This study aims to make full use of the advantages of the two methods, reduce the multiple solutions of single inversion and improve the accuracy of the inversion. Thus, a nonlinear joint inversion method of VES and Rayleigh wave exploration based on improved differential evolution (DE) algorithm was proposed.

Based on the DE algorithm, a new initialization strategy was proposed. Then, taking AK-type with high-velocity interlayer model and HA-type with low-velocity interlayer model near the surface as examples, the inversion results of different methods were compared and analyzed. Then, the proposed method was applied to the field data in Chengde, Hebei Province, China. The stratum structure was accurately depicted and verified by drilling.

The synthetic data and field data results showed that the joint inversion of VES and Rayleigh wave data based on the improved DE algorithm can effectively improve the interpretation accuracy of the single-method inversion and had strong stability and large generalizable ability in near-surface engineering problems.

A joint inversion method of VES and Rayleigh wave data based on improved DE algorithm is proposed, which can improve the accuracy of single-method inversion.

This review aims to give a critical view of the wheel/rail high frequency vibration-induced vibration fatigue in railway bogie.

Vibration fatigue of railway bogie arising from the wheel/rail high frequency vibration has become the main concern of railway operators. Previous reviews usually focused on the formation mechanism of wheel/rail high frequency vibration. This paper thus gives a critical review of the vibration fatigue of railway bogie owing to the short-pitch irregularities-induced high frequency vibration, including a brief introduction of short-pitch irregularities, associated high frequency vibration in railway bogie, typical vibration fatigue failure cases of railway bogie and methodologies used for the assessment of vibration fatigue and research gaps.

The results showed that the resulting excitation frequencies of short-pitch irregularity vary substantially due to different track types and formation mechanisms. The axle box-mounted components are much more vulnerable to vibration fatigue compared with other components. The wheel polygonal wear and rail corrugation-induced high frequency vibration is the main driving force of fatigue failure, and the fatigue crack usually initiates from the defect of the weld seam. Vibration spectrum for attachments of railway bogie defined in the standard underestimates the vibration level arising from the short-pitch irregularities. The current investigations on vibration fatigue mainly focus on the methods to improve the accuracy of fatigue damage assessment, and a systematical design method for vibration fatigue remains a huge gap to improve the survival probability when the rail vehicle is subjected to vibration fatigue.

The research can facilitate the development of a new methodology to improve the fatigue life of railway vehicles when subjected to wheel/rail high frequency vibration.

Promoting low-carbon in the construction industry is important for achieving the overall low-carbon goals. Public–private partnership is very popular in public infrastructure projects. However, different perceptions of low-carbon and behaviors of public and private sectors can hinder the realization of low-carbon in these projects. In order to analyze the willingness of each stakeholder to cooperate towards low-carbon goals, an evolutionary game model is constructed.

An evolutionary game model that considers the opportunistic behavior of the participants is developed. The evolutionary stable strategies (ESSs) under different scenarios are examined, and the factors that influence the willingness to cooperate between the government and private investors are investigated.

The results illustrate that a well-designed system of profit distribution and subsidies can enhance collaboration. Excessive subsidies have negative impact on cooperation between the two sides, because these two sides can weaken income distribution and lead to the free-riding behavior of the government. Under the situation of two ESSs, there is also an optimal revenue distribution coefficient that maximizes the probability of cooperation. With the introduction of supervision and punishment mechanism, the opportunistic behavior of private investors is effectively constrained.

An evolutionary game model is developed to explore the cooperation between the public sector and the private sector in the field of low-carbon construction. Based on the analysis of the model, this paper summarizes the conditions and strategies that can enable the two sectors to cooperate.

This study examines the relationship between internal control and corporate environmental responsibility.

Unlike US studies that concentrate solely on internal control over financial reporting, this study uses a comprehensive index that encompasses internal control over financial reporting, operations, and compliance. Corporate environmental responsibility is measured by environmental investments. Our research sample comprises Chinese listed firms from 2010 to 2018.

The results demonstrate a positive correlation between internal control and corporate environmental investments. Furthermore, we find that firms with high-quality internal control can improve their financial and environmental performance through environmental investments. After decomposing internal control into its five components, we show that the control environment, control activities, and information and communication components exhibit stronger effects on environmental investments than the risk assessment and monitoring components. Finally, the cross-sectional analyses reveal that the positive effect of internal control is more pronounced in private firms and in firms that are subject to weaker environmental regulation.

By focusing on the effect of a comprehensive internal mechanism on corporate environmental responsibility in China, this study contributes to the literature in developed-country settings that overwhelmingly focuses on the impact of external stakeholders and regulations.

In recent years, terrorist attacks have gradually become one of the important factors endangering social security. In this context, this research aims to propose methods and principles which can be utilized to make effective evacuation plans to reduce casualties in terrorist attacks.

By analyzing the statistical data of terrorist attack videos, this paper proposes an extended cellular automaton (CA) model and simulates the panic evacuation of the pedestrians in the terrorist attack.

The main findings are as follows. (1) The panic movement of pedestrians leads to the dispersal of the crowd and the increase in evacuation time. (2) Most deaths occur in the early stage of crowd evacuation while pedestrians gather without perceiving the risk. (3) There is a trade-off between escaping from the room and avoidance of attackers for pedestrians. Appropriate panic contagion enables pedestrians to respond more quickly to risks. (4) Casualties are mainly concentrated in complex terrains, e.g. walls, corners, obstacles, exits, etc. (5) The initial position of the attackers has a significant effect on the crowd evacuation. The evacuation efficiency should be reduced if the attacker starts the attack from the exit or corners.

In this research, the concept of “focus region” is proposed to depict the different reactions of pedestrians to danger and the effects of the attacker’s motion (especially the attack strategies of attackers) are classified. Additionally, the influences on pedestrians by direct and indirect panic sources are studied.