Search results

The following theoretical concepts are applicable to the case and its learning objectives: Stakeholder Power-Interest Matrix and Carroll’s Pyramid of Corporate Social Responsibility.

Information was obtained in three separate interviews with PSEG. In February 2018, an introductory phone conference was conducted with a number of senior managers within PSEG, including the Director of Development and Strategic Issues, Kate Gerlach. In April 2018, an onsite interview was conducted with Gerlach, who connected the author with Scott Jennings. A phone interview was conducted with Scott Jennings in May 2018 and follow-up communication with him was handled via e-mail. The information obtained from these interviews was supplemented by material obtained from secondary sources. None of the information in the case has been disguised.

Scott Jennings, a Vice President at PSEG, the diversified New Jersey-based energy company, was the project leader for a large commercial wind farm that was to be built off the coast. The project, Garden State Offshore Energy, a joint venture between PSEG and Deepwater Wind, an experienced developer of offshore wind projects, had been announced over six years earlier, in late 2008. In the time that had passed, the Garden State Offshore Energy project team had waited for the New Jersey Bureau of Public Utilities, which had been tasked by Governor Chris Christie to evaluate the project costs before it could authorize the actual construction of the wind turbines. Justifying the project on a cost basis proved to be difficult; despite the growing public sentiment in favor of projects that utilized renewable energy sources such as wind power, the Garden State Offshore Energy team was unable to move the project forward. Scott needed to decide whether it made sense to continue to hold regular meetings with the Garden State Offshore Energy team. Scott’s colleagues suggested that Scott speak with senior management at PSEG to find out if the resources that had been dedicated to the Garden State Offshore Energy project could be shifted to other projects that might be more feasible.

This case is suitable for courses in Sustainability. It is appropriate to use the case in undergraduate courses to illustrate decision making in a regulated industry. Sufficient information is presented in the case to debate both sides of the offshore wind authorization issue.

The purpose of this paper is to discuss how wind farms attract wind turbine manufacturers to get involved in wind turbines’ maintenance service with revenue sharing contract of bundled service under which the background of operation and maintenance (O&M) aftermarket of wind turbine exists. The authors also try to extend the results to the application of product plus service business mode on large-scale equipment O&M service. At present, Chinese wind power industry is suffering from production capacity redundancy. The profit levels for both wind farm and wind turbine manufacturers are relatively low. It is significant for Chinese wind power industry development to coordinate the supply chain of wind power in order to reduce O&M costs and increase revenues.

The present paper discusses product plus aftermarket service contract design on the background of closed-loop product service chain and uncertain equipment demand using revenue sharing contract model.

If centralized decision making is assumed, the authors find that the wind turbine order increases as the aftermarket service effort level and aftermarket service profit increase; aftermarket service effort level is positively correlative to the service efficiency. On the other hand, if decentralized decision making is assumed, the wind turbine order increases as share of the aftermarket service chain by manufacturer to wind farm increases and share of product supply chain by wind farm to manufacturer decreases. The optimal effort level of wind farm increases as the share of aftermarket service chain increases while the optimal effort level of the manufacturer is a concave function of share of aftermarket service chain if service quality linear correlates with effort level. Meanwhile, the authors find that the revenues of the product supply chain and aftermarket service chain have a concave relationship. This relationship is not affected by the format of relationship between service quality and effort level (linear or exponential).

The results could potentially be used to provide the wind turbine manufacturer with a greater profit space and satisfy wind farm’s equipment maintenance demand at the same time. It can also guide the practice of revenue sharing in the aftermarket service and manufacturing servitization.

In this model, the authors assumed that both the forward revenue sharing of power generation by wind farm to manufacturer and the backward revenue sharing of maintenance service by the manufacturer to wind farm exist in closed-loop product service chain. Then the authors discussed channel coordination of such cross-revenue sharing contract.

This study aims to intend and implement the optimal power flow, where tuning the production cost is done with the inclusion of stochastic wind power and different kinds of flexible AC transmission systems (FACTS) devices. Here, the speed with fitness-based krill herd algorithm (SF-KHA) is adopted for deciding the FACTS devices’ optimal sizing and placement integrated with wind power. Here, the modified SF-KHA optimizes the sizing and location of FACTS devices for attaining the minimum average production cost and real power depletions of the system. Especially, the objective includes reserve cost for overestimation, cost of thermal generation of the wind power, direct cost of scheduled wind power and penalty cost for underestimation. The efficiency of the offered method over several popular optimization algorithms has been done, and the comparison over different algorithms establishes proposed KHA algorithm attains the accurate optimal efficiency for all other algorithms.

The proposed FACTS devices-based power system with the integration of wind generators is based on the accurate placement and sizing of FACTS devices for decreasing the actual power loss and total production cost of the power system.

Through the cost function evaluation of the offered SF-KHA, it was noted that the proposed SF-KHA-based power system had secured 13.04% superior to success history-based adaptive differential evolution, 9.09% enhanced than differential evolution, 11.5% better than artificial bee colony algorithm, 15.2% superior to particle swarm optimization and 9.09% improved than flower pollination algorithm.

The proposed power system with the accurate placement and sizing of FACTS devices and wind generator using the suggested SF-KHA was effective when compared with the conventional algorithm-based power systems.

The purpose of this paper is to examine the way organizational actors argue to obtain a license to operate for new ventures.

The design, which addresses the issue at the industry level, consists of a case study of the ways in which power developers argue for the development of wind energy in Sweden.

The study shows that wind power developers proffer a necessity‐ability‐acceptability line of argument that relies not only on the convincing character of claims grounded in premises, but also on the persuasive character of values, knowledge and opinion likely to win the adherence of the audience.

From a theoretical perspective, this is an illustration of the relevance of bridging the divide between argumentation theories in tune with formal or informal logic and those oriented toward rhetoric and the social practice of communication.

More practically, the paper suggests that in order to obtain a license to operate, managers need to combine and balance in their practice of argumentation a logical approach to factual knowledge with a situational sense for the rhetoric favored by the audience.

This study emphasizes the key role played by argumentation in corporate communication.

This study aims to construct a novel maximum power tracking control system for the direct drive permanent magnet synchronous generator (PMSG) of the wind energy conversion system (WECS) to solve the following problems: how to effectively eliminate the system’s model parameter disturbances and speed up the dynamic performance of the system; and how to eliminate harmonics in WECS under different wind speeds.

To obtain the maximum output power of PMSG at WECS under different wind speeds, the following issues should be considered: (1) how to effectively eliminate the system’s model parameter disturbances and speed up the dynamic performance of the system; and (2) how to suppress system harmonics. For Problem 1, adding d–q compensation factors to active disturbance rejection control (ADRC) for the current loop realizes the d–q axis decoupling control, which speeds up the dynamic performance of the system. For Problem 2, the resonant controller is introduced into the ADRC for the current loop to suppress harmonic current in WECS under different wind speeds.

The simulation results demonstrate that the proposed control method is simpler and more reliable than conventional controllers for maximum power tracking.

Compared with traditional controllers, the proposed controller can speed up the dynamic performance of the system and suppress the current harmonic effectively, thus better achieving maximum power tracking.

The rapid rising of renewable energy sources particularly wind energy cannot be ignored. The numerical increase in wind energy farms throughout the world is the best example. The purpose of this paper is to assess the basic question of whether wind characteristics affect the performance and cost of energy. The importance of this question cannot be ruled out while comparing renewable energy to a conventional form of energy more specifically especially for the developing country where the cost of energy is very high.

The research design of this paper is consists of an assessment of local wind characteristics of the wind farm site using Weibull k and c parameters. The performance model is used to assess the performance of the wind turbine (WT) corresponding to local wind characteristics. The wind correlation with WT in terms of changing wind speed has been assessed to quantify the effects of wind speed on the WT behavior and failure of WT components. Similarly, the power curve of WT is assessed and compared with the International Electrotechnical Commission standards 61400-12-2. The WT power coefficient and tip speed ratio corresponding to wind speed is also investigated. The energy volume and cost of energy lost model is used to determine the cost and volume loss of energy/kWh of the wind farm.

The findings of practical wind farms showed that the wind conditions of the site are showing a strong tendency that can be determined from the results of Weibull k and c parameters. The k and c parameters are observed to be 3.44 and 9.16 m/s, respectively, for a period of a year. The standard deviation is observed to be 2.56 for a period of a year. WT shows the efficient behavior can be obtained from the power coefficient and tip speed of WT at different wind speeds. Also, wind farm observation showed that to be some increasing wind speed cause of based WT component failures. The results of energy volume and cost/kWh assessment showed that the major portion of energy volume and cost of energy is lost owing to network, voltage dip and frequency surge, electrical and mechanical components failures.

Generally, it can be concluded that the WTs are now able to cope with variable wind speeds. However, the results of this paper are showing that WT performance and availability decreased due to increased wind speeds. It can also be a reason to decreased volume and increase the cost of energy/kWh.

Jubail Industrial City is one of the largest industrial centers in the Middle East, offering potential opportunities for renewable energy generation. This research paper presents a comprehensive analysis of the wind resources in Jubail Industrial City and proposes the design of a smart grid-connected wind farm for this strategic location.

The study used wind data collected at three different heights above ground level – 10, 50 and 90 m – over four years from 2017 to 2020. Key parameters, such as average wind speeds (WS), predominant wind direction, Weibull shape, scale parameters and wind power density (WPD), were analyzed. The study used Windographer, an exclusive software program designed to evaluate wind resources.

The average WS at the respective heights were 3.07, 4.29 and 4.58 m/s. The predominant wind direction was from the north-west. The Weibull shape parameter (k) at the three heights was 1.77, 2.15 and 2.01, while the scale parameter (c) was 3.36, 4.88 and 5.33 m/s. The WPD values at different heights were 17.9, 48.8 and 59.3 W/m², respectively.

The findings suggest that Jubail Industrial City possesses favorable wind resources for wind energy generation. The proposed smart grid-connected wind farm design demonstrates the feasibility of harnessing wind power in the region, contributing to sustainable energy production and economic benefits.

The purpose of this paper is to introduce a holistic decision support system based on condition-based maintenance which utilizes meteorological forecasting information to support decision-making process in services of wind power enterprises.

A pilot conceptual system combining with meteorological information and operations management has been formulated in this study. The proposed system provides benchmarking to support decision making directly and indirectly basing on processing meteorological information and evaluating its impact on service operations. It collects meteorological data to predict failure probabilities in different areas which need corresponding maintenance service and schedule the optimal maintenance periods. In addition, it provides meteorological forecasting and decision support in case of extreme weather events (EWEs).

The conceptual study shows that there is a connection between the meteorological conditions and failures, and it is feasible to make service decisions based on the predictions of weather conditions and their impacts to failures.

The research presented at the present phase is not much beyond a conceptual framework. The actual implementation and all possible related practical issues will be dealt with in future research.

It helps decision makers to predict and identify possible categories of faults in wind turbine, make optimal service decisions to enhance the output performance of wind power generation, and take in advance emergency counteractions in case of EWEs.

It presents a novel concept and provides a roadmap to achieve optimal operations in wind park application through combining meteorological information system with service decision making.

The objective of this paper to assess the wind energy potential of the Sujawal site for minimizing the dependence on fossil fuels.

The site-specific wind shear coefficient and the turbulence model were investigated. The two-parameter, k and c, Weibull distribution function was used to analyze the wind speed of the Sujawal site. The standard deviation of the site was also assessed for a period of a year. Also, the coefficient of variation was carried out to determine the difference at each height. The wind power and energy densities were assessed for a period of a year. The economic assessment of energy/kWh was investigated for selection of appropriate wind turbine.

The mean wind shear of the Sujawal site was found to be 0.274. The mean wind speed was found to be 7.458, 6.911, 6.438 and 5.347 at 80, 60, 40 and 20 m, respectively, above the ground level (AGL). The mean values of k parameter were observed to be 2.302, 2.767, 3.026 and 3.105 at 20, 40, 60 and 80 m, respectively, for a period of a year. The Weibull c m/s parameter values were found to be 8.415, 7.797, 7.265 and 6.084 m/s at 80, 60, 40 and 20 m, respectively. The mean values of standard deviation were found to be 0.765, 0.737, 0.681 and 0.650 at 20, 40, 60, and 80 m, respectively. The mean wind power density (W/m²) was found to be 287.33, 357.16, 405.16 and 659.58 for 20, 40, 60 and 80 m, respectively. The economic assessment showed that wind turbine 7 had the minimum cost/kWh US$ 0.0298.

The Sujawal site is suitable for installing the utility wind turbines for energy generation at the lowest cost; hence, a sustainable solution.