Search results

In the supply chain disruption risk, the issue of supplier evaluation and selection is solved by an extended VIKOR method based on regret theory.

Considering the influence of irrational emotions of decision makers, an evaluation model is designed by the regret theory and VIKOR method, which makes the decision-making process closer to reality.

The paper has some innovations in the evaluation index system and evaluation model construction. The method has good stability under the risk of supply chain interruption.

The mixed evaluation information is used to describe the attributes, and the evaluation index system is constructed by the combined method of the social network analysis method and the literature research method to ensure the accuracy and accuracy of the extracted attributes. The issue of supplier evaluation and selection is solved by an extended VIKOR method based on regret theory.

This paper aims to report the effect of titanium oxide (TiO₂) particles on the physical, mechanical, tribological and water resistance properties of 5% NaOH-treated bamboo fiber–reinforced composites.

In this research, the epoxy/bamboo/TiO₂ hybrid composite filled with 0–8 Wt.% TiO₂ particles has been fabricated using simple hand layup techniques, and testing of the developed composite was done in accordance with the American Society for Testing and Materials (ASTM) standard.

The results of this study indicate that the addition of TiO₂ particles improved the mechanical properties of the developed epoxy/bamboo composites. Tensile properties were found to be maximum for 6 Wt.%, and impact strength was found to be maximum for 8 Wt.% TiO₂ particles-filled composite. The highest flexural properties were found at a lower TiO₂ fraction of 2 Wt.%. Adding TiO₂ filler helped to reduce the water absorption rate. The studies related to the wear and friction behavior of the composite under dry and abrasive wear conditions reveal that TiO₂ filler was beneficial in improving the wear performance of the composite.

This research paper attempts to include both TiO₂ filler and bamboo fibers to develop a novel composite material. TiO₂ micro and nanoparticles are promising filler materials; it helps to enhance the mechanical and tribological properties of the epoxy composites and in literature, there is not much work reported, where TiO₂ is used as a filler material with bamboo fiber–reinforced epoxy composites.

Crack detection of pavement is a critical task in the periodic survey. Efficient, effective and consistent tracking of the road conditions by identifying and locating crack contributes to establishing an appropriate road maintenance and repair strategy from the promptly informed managers but still remaining a significant challenge. This research seeks to propose practical solutions for targeting the automatic crack detection from images with efficient productivity and cost-effectiveness, thereby improving the pavement performance.

This research applies a novel deep learning method named TransUnet for crack detection, which is structured based on Transformer, combined with convolutional neural networks as encoder by leveraging a global self-attention mechanism to better extract features for enhancing automatic identification. Afterward, the detected cracks are used to quantify morphological features from five indicators, such as length, mean width, maximum width, area and ratio. Those analyses can provide valuable information for engineers to assess the pavement condition with efficient productivity.

In the training process, the TransUnet is fed by a crack dataset generated by the data augmentation with a resolution of 224 × 224 pixels. Subsequently, a test set containing 80 new images is used for crack detection task based on the best selected TransUnet with a learning rate of 0.01 and a batch size of 1, achieving an accuracy of 0.8927, a precision of 0.8813, a recall of 0.8904, an F1-measure and dice of 0.8813, and a Mean Intersection over Union of 0.8082, respectively. Comparisons with several state-of-the-art methods indicate that the developed approach in this research outperforms with greater efficiency and higher reliability.

The developed approach combines TransUnet with an integrated quantification algorithm for crack detection and quantification, performing excellently in terms of comparisons and evaluation metrics, which can provide solutions with potentially serving as the basis for an automated, cost-effective pavement condition assessment scheme.

The development of social networks enhances the interaction between people, which brings new challenges to the research of group decision-making (GDM). This study aims at the problem that the synergy and redundancy due to interaction among decision-makers are ignored in the previous GDM, a trust-enhanced consensus reaching model based on interaction among decision-makers with incomplete preferences is proposed.

Firstly, confidence level is introduced to improve the hesitation phenomenon that should be considered when calculating trust degree; Secondly, a new trust propagation operator is developed to deal with indirect trust relationships; Thirdly, trust degree is transformed into interaction index to quantify the synergy and redundancy in decision-making. Fuzzy capacities of decision-makers are used to replace traditional weights, and the final scores of alternatives are obtained through Choquet integral.

The proposed model using fuzzy capacity can reflect the synergy or redundancy among decision-makers and improve the accuracy of final ranking result and reduce the loss of information.

This study proposes a trust-enhanced consensus reaching model, which develops a new trust propagation operator to ensure the continuous attenuation of trust in propagation process. And the proposed model uses fuzzy capacity to improve the enhancement or attenuation on the scores of alternatives.

This study examines the impact of university science parks’ (USPs) capabilities on revenue generation and introduces regional innovation as a moderating variable. This study aims to provide insights into enhancing revenue generation and fully leveraging the role of USPs in promoting revenue generation.

This study employs system generalized method of moments (GMM) estimation for 116 universities in China from 2008 to 2020, using hierarchical regression analysis to examine the relationships between variables.

The findings suggest that USPs play a beneficial role in fostering revenue generation. Specifically, the provision of incubation funding demonstrates a positive correlation, while USPs size exhibits an inverted U-shaped pattern, with a threshold at 3.037 and a mean value of 3.712, highlighting the prevalent issue of suboptimal personnel allocation in the majority of USPs. Moreover, the analysis underscores the critical moderating influence of regional innovation, affecting the intricate interplay between USPs size, incubation funding and revenue generation.

The single country (China) analysis relied solely on the use of secondary data. Future studies could expand the scope to include other countries and employ primary data collection. For instance, future research can further examine how regional development and USPs strategic plan impact revenue generation.

The study recommends that USPs managers and policymakers recognize the importance of incubation funding and determine the optimal quantity of USPs size to effectively foster revenue generation in USPs. Policymakers can use regional innovation as a moderating variable to reinforce the relationship between USPs size and incubation funding on revenue generation.

The study’s findings can contribute to the strategic industry growth and economic development of nations by promoting revenue generation. Leveraging the role of USPs and implementing the study’s recommendations can strengthen innovation and technology capabilities, driving strategic industry growth and economic development. This can enhance global competitiveness and promote sustainable economic growth.

This study introduces regional innovation as a moderating variable and provides empirical evidence of its influence on the relationship between USPs size and incubation funding on revenue generation. This adds value to research to the existing literature on USPs and revenue generation by showcasing the importance of examining the regional impact in research and innovation.

The purpose of this paper is to present a comparative study of flight circumstances, dynamic stability characteristics and controllability for two transport aircraft in severe atmospheric turbulence at transonic cruise flight for the purpose to obtain the prevention concepts of injuries to passengers and crew members for pilot training in International Air Transport Association (IATA) – Loss of Control In-flight (LOC-I) program.

A twin-jet and a four-jet transport aircraft encountering severe atmospheric turbulence are the study cases for this paper. The nonlinear unsteady aerodynamic models are established through flight data mining and the fuzzy-logic modeling technique based on the flight data of flight data recorder. This method can be adopted to examine the influence of horizontal wind shear and crosswind on loss of control, dynamic stability characteristics and controllability for transport aircraft in different weights and different sizes in tracking aviation safety of existing different types of aircraft.

The horizontal wind shear or crosswind before the turbulence encounter will easily induce rolling motion and then initiate the sudden plunging motion during the turbulence encounter. The roll rate will increase the oscillatory rolling motion during plunging motion, if the rolling damping is insufficient. The drop-off altitude will be enlarged by the oscillatory rolling motion during the sudden plunging motion.

A lack of the measurement data of vertical wind speed sensor on board to verify the estimated values of damping term is one of the research limitations for this study. The fact or condition of being severe in sudden plunging motion can be judged through the analysis of oscillatory derivatives with both dynamic stability and damping terms.

The roll rate will increase the oscillatory rolling motion during plunging motion, if the rolling damping is insufficient. The drop-off altitude will be enlarged by the oscillatory rolling motion during the sudden plunging motion. The horizontal wind shear or crosswind before the turbulence encounter will easily induce rolling motion and then initiated the sudden plunging motion during the turbulence encounter. If the drift angle is large, to turn off the autopilot of yaw control first and stabilize the rudder by the pedal. When passing through the atmosphere turbulence area, the pilots do not need to amend the heading angle urgently.

The flight safety prevention in avoidance of injuries for passengers and cabin crews is essential for the airlines. The horizontal wind shear or crosswind before the turbulence encounter will easily induce rolling motion and then initiated the sudden plunging motion during the turbulence encounter.

The flight safety prevention in avoidance of injuries for passengers and cabin crews is essential. The present assessment method is an innovation to examine the loss of control problems of aviation safety and promote the understanding of aerodynamic responses of the jet transport aircraft. It is expected to provide a valuable lecture for the international training courses for IATA – LOC-I program after this paper is being published.

Growing recognition of the metaverse has implied its far-reaching impacts on the tourism and hospitality industry. This paper sets out to detail the status of metaverse-related research in tourism and hospitality, propose intriguing directions for future studies and highlight multiple areas that call for immediate attention from practitioners in navigating the metaverse phenomenon.

This viewpoint paper referenced the extant academic discussion on the metaverse, based on which timely suggestions for academia and practices are proposed.

This viewpoint paper presents an account of the metaverse and discusses the status of metaverse-related research in hospitality and tourism. It then proposes intriguing avenues for future research around the topics of marketing, reconceptualizing service quality, attitude and behaviors, electronic customer-to-customer interactions, transformative impacts on the society well-being and research methodology. Multiple areas that call for immediate attention from practitioners in navigating the metaverse phenomenon are also highlighted. Both scholars and industry organizations are called upon to assume some responsibility for mapping out protocols to guide the appropriate development, use and governance of metaverse worlds. Governments and policymakers are further encouraged to consider the ramifications of metaverse development for individuals and society and to devise proactive mitigation strategies.

This viewpoint paper proposes several directions for future business practices in the areas of co-creation, experiential consumption, and emerging critical issues in healthcare, human resources, and social media services. It expects to inspire more discussion about the potential impacts of metaverse on the wider society. Its practical significance will further expand the theoretical foundation of the metaverse research and makes this viewpoint paper an intriguing prospect.

The nascent stage of academic discussion intended to guide the development of metaverse is noteworthy, which forms a notable contrast with the growing recognition of its potential of co-creating transformational experiences in hospitality and tourism. This viewpoint paper joins the current academic conversations acknowledging this phenomenon in hospitality and tourism. Provided the notable topicality and empirical relevance, the expanded scope and rich content the present viewpoint paper provides for metaverse will offer a fruitful ground for future research to tap further into currently underrepresented areas.

The purpose of this study is to determine the competency characteristics required for the employment of master’s degree students in educational technology.

A combined qualitative and quantitative method was used to consult multiple experts through a modified Delphi method. Competency characteristics were extracted from Chinese recruitment apps, national recruitment websites and university training programs. Ten senior teacher experts who teach educational technology master’s students were consulted through a questionnaire consultation to validate the proposed competency model. The weights of competency characteristics were determined through a combination of the analytic hierarchy process and entropy method.

The results show that when recruiting educational technology master’s students, more emphasis is placed on operational skills. The majority of companies tend to assess practical abilities rather than theoretical knowledge. Relevant knowledge of educational technology, psychology, computer science and education is considered to be the basic knowledge components of educational technology master’s students, while professional skills are the core skills required for their positions. Therefore, universities need to focus on training, educational technology graduate students in these areas of competence. The study also found that professional qualities (such as physical and mental fitness) and personality traits (interpersonal communication and interaction) receive more attention from companies and are essential competencies for educational technology master’s students.

A competence model for educational technology master’s students is proposed, which includes aspects such as knowledge, personal skills/abilities, professional qualities and personality traits. The competence elements included in this model can serve as reference indicators for universities to cultivate the competence of educational technology master’s students, as well as reference points for recruiting units to help them select talents. This represents a new dimension in research related to the employment of educational technology master’s students. The study enriches the research objects and competence dictionary in the field of competence research.

“Metaverse” has become a buzzword in the Chinese stock market. However, it remains unclear whether a firm's metaverse-related announcements will elicit positive stock market reactions. Whether and how stakeholder reactions are influenced by a firm's metaverse-related readiness also needs to be further explored. This study aims to discuss the aforementioned objective.

The authors derived a set of factors based on readiness theory and business ecosystem literature and extend them into the context of the metaverse. The authors used a sample of 642 Chinese listed firms in 2021 to investigate the hypotheses through the event study.

The study’s findings show that metaverse coverage induces a positive stock market reaction, but it is subject to three moderating effects. The authors introduce the novel concepts of IT readiness, ecosystem readiness and digital infrastructure readiness as the moderators. Stakeholders perceive metaverse announcements as overhyped, and stock prices do not fluctuate significantly after a metaverse announcement when the listed firms are not ready to embrace the metaverse.

This study is one of the first that introduces the event study method into the metaverse research, and it reveals that different levels of readiness influence stakeholders' evaluations and reactions to corporate metaverse coverage. This provides empirical evidence on metaverse development in China from the stock market's perspective.

The study aims to examine the effects of guanxi and harmonious leadership on acquisition performance and the role of sociocultural integration as a mediating mechanism impacting the above links, with a focus on Chinese cross-border acquisitions in The Netherlands.

Data were collected through survey questionnaire with 91 respondents who work in Dutch-acquired companies. Regression analysis was used for exploring the relationship.

The study finds that both guanxi and harmonious leadership are positive to acquisition performance, and sociocultural integration represents a significant mediating mechanism by which guanxi and harmonious leadership can result in improved acquisition performance.

This study contributes to culture research by emphasizing the clarification of specific Chinese cultural values and cultural practices in cross-border acquisitions and examining the role of guanxi and harmonious leadership in acquisition performance. Meanwhile, this study helps to unveil Chinese cross-border acquisitions in The Netherlands by examining the mediating force – sociocultural integration.