Search results

This study aims to investigate the fabrication of solid ankle foot orthoses (SAFOs) using fused deposition modeling (FDM) printing technology. It emphasizes cost-effective 3D scanning with the Kinect sensor and conducts a comparative analysis of SAFO durability with varying thicknesses and materials, including polylactic acid (PLA) and carbon fiber-reinforced (PLA-C), to address research gaps from prior studies.

In this study, the methodology comprises key components: data capture using a cost-effective Microsoft Kinect® Xbox 360 scanner to obtain precise leg dimensions for SAFOs. SAFOs are designed using CAD tools with varying thicknesses (3, 4, and 5 mm) while maintaining consistent geometry, allowing controlled thickness impact investigation. Fabrication uses PLA and PLA-C materials via FDM 3D printing, providing insights into material suitability. Mechanical analysis uses dual finite element analysis to assess force–displacement curves and fracture behavior, which were validated through experimental testing.

The results indicate that the precision of the scanned leg dimensions, compared to actual anthropometric data, exhibits a deviation of less than 5%, confirming the accuracy of the cost-effective scanning approach. Additionally, the research identifies optimal thicknesses for SAFOs, recommending a 4 and 5 mm thickness for PLA-C-based SAFOs and an only 5 mm thickness for PLA-based SAFOs. This optimization enhances the overall performance and effectiveness of these orthotic solutions.

This study’s innovation lies in its holistic approach, combining low-cost 3D scanning, 3D printing and computational simulations to optimize SAFO materials and thickness. These findings advance the creation of cost-effective and efficient orthotic solutions.

The purpose of this paper is to improve the problem of kinematics incompatibility of human–exoskeleton in the existing rigid lower-limb exoskeleton (LLE).

In this paper, following an introduction, the motion characteristics of the human knee joint and the design method of the exoskeleton were introduced. A kinematics model of the LLE based on cross-four-bar linkage was obtained. The structural parameters of the LLE mechanism were optimized by the particle swarm optimization algorithm. The predefined trajectories used in the optimization process were derived from the ankle joint, not the instantaneous center of rotation of the knee joint. Finally, the motion deviation of the optimization result was simulated, and the human–exoskeleton coordination experiment was designed to compare with the traditional single-axis knee joint in terms of comfort and coordination.

The lower limb exoskeleton mechanism obtained in this paper has a good tracking effect on human movement and has been improved in terms of comfort and coordination compared with the traditional single-axis knee joint.

The customized exoskeleton design method introduced in this paper is relatively simple, and the obtained exoskeleton has better movement coordination than the traditional exoskeleton. It can provide a reference for the design of lower limb exoskeleton and lower limb orthosis.

At the moment, in terms of both research and commercial products, smart shoe technology and applications seem not to attract the same magnitude of attention compared to smart garments and other smart wearables such as wrist watches and wrist bands. The purpose of this study is to fill this knowledge gap by discussing issues regarding smart shoe sensing technologies, smart shoe sensor placements, factors that affect sensor placements and finally the areas of smart shoe applications.

Through a review of relevant literature, this study first and foremost attempts to explain what constitutes a smart shoe and subsequently discusses the current trends in smart shoe applications. Discussed in this study are relevant sensing technologies, sensor placement and areas of smart shoe applications.

This study outlined 13 important areas of smart shoe applications. It also uncovered that majority of smart shoe functionality are physical activity tracking, health rehabilitation and ambulation assistance for the blind. Also highlighted in this review are some of the bottlenecks of smart shoe development.

To the best of the authors’ knowledge, this is the first comprehensive review paper focused on smart shoe applications, and therefore serves as an apt reference for researchers within the field of smart footwear.

This paper aims to critically analyse the circular economy (CE) models adopted in hospitality and tourism to tackle societal challenges in the current Anthropocene era, exploring the driving values and sustainability approaches.

A systematic literature review was carried out with an increasing level of analysis to delve more in-depth into the ability of the CE models to respond to current societal challenges. The review involved a stepwise analysis, starting with a thematic analysis of 151 papers to create a conceptual structure map of circular hospitality and tourism literature. Based on originality and representativeness, 22 papers were selected and analysed according to Hoffman and Jennings’ (2018; 2021) institutional approach to sustainability, which entails specific archetypes to address the Anthropocene society: market rules, technology fix and cultural re-enlightening.

The hospitality and tourism industry has made progress towards implementing CE models. However, CE models in market role and technology fix archetypes may fail to address the current challenges of the Anthropocene era. New culture-led approaches within the cultural re-enlightening archetype, such as the regenerative land practices, a-growth and place-making, and circular society, can foster a more radical shift towards strong sustainability.

The paper highlights the urgent need for a cultural shift towards radical and strong sustainability, identifying future research directions. Policymakers have a crucial role in shaping sustainability practices consistent with an ecological culture centred on acknowledging planetary boundaries.

Despite the increasing interest in CE models, it is still debated how the hospitality and tourism industry can continue to thrive while avoiding harmful impacts on the environment and local communities. The study critically reflects on the current contribution of CE models towards strong sustainability in hospitality and tourism.

Urban mobility has substantially evolved in several western countries, shifting from interest in road expansion strategies to cater motorized movement to the emphasis on sustainable mobility. This is, however, not the case in several developing countries that still try to accommodate vehicular flows in inner historic cities. This paper aims at providing an assessment framework that helps in evaluating the effect of streetscape development on the walking and cycling environment in historic contexts.

This research follows a two-phase methodology. Phase 1 is the investigation of the literature review including the streetscape design, Sustainable Development Goals (SDGs) and indicators for the assessment of walking and cycling environment. This phase results in developing a set of indicators for the assessment. Phase 2 is the case study including, methods, steps and results of the assessment based on the output of Phase 1. This phase concludes with a discussion on the challenges and recommendations for the enhancement.

The streetscape development in Afrang was insufficient and negatively affected the walking and cycling environment. It was motorized-oriented, instead of enhancing green mobility. The interventions led to more crowds, safety risks and less pleasant experience. Moreover, the car users' experience was enhanced initially; however, the traffic situation did not persist. A sustainable urban mobility approach is necessary to be implemented with consideration to the global level and the relation to SDGs.

There is a gap in tackling the research problem both within the context of Port Said in particular and Egyptian context in general. Local authorities need a clear structured methodology to follow in the development of the streetscape. The assessment indicators gathered can be the basis for evaluating future plans.

This account becomes both a theoretical and a methodological exploration of walking with the law; as such the purpose of the paper is to demonstrate how we migh walk in order to attend to how the law makes the built environment possible, how it shapes and creates places to be lived in, visited and experienced and how the law manifests in human encounters and interactions in the everyday life of the city.

In this study, the authors combine a walking narrative approach with an open-ended interview to raise awareness of the law’s hidden presence in the urban environment. The authors explore the city of Sheffield, in Yorkshire, in the North of England, to learn about its past, regeneration and future development by combining the appreciation of the built environment, as experienced by the senses and movement, with a guided tour.

This study highlights the interconnectivity of law and place both objectively and subjectively: the authors discuss sensorial experiences of law, and also elaborate on the normativity of law, as manifested in the regulation and the making of urban places in Sheffield.

The originality lies in the combination of methods used to appreciate the manifestation of law in the built environment, comprising interview, autoethnographic elements and walking (multisensory experience).

Why is it that, despite repeated claims that digital-content firms and internet-based businesses can internationalize everywhere almost instantly, many seem unable to profitably expand outside their home markets? Why have emerging market firms (EMNEs) caught up with established developed-country multinationals (DMNEs) so much faster than expected? In this chapter, the author argues that the clue to these two puzzles lies in the realization that, contrary to the dominant view in the international business (IB) literature that focuses only on the intangibles exploited by DMNEs and assumes that these firms are free to unilaterally decide on their mode of entry and operation, doing business in a foreign country is only possible if intangibles are bundled with complementary local resources, usually held by local firms. Taking into account these complementary local resources and their owners makes it clear that DMNEs are not always free to choose their entry mode but must enlist the cooperation of local resource owners. The need of digital-content and internet-based firms for local complementary resources also explains why they sometimes experience problems when expanding abroad. Lastly, control of complementary local resources provides EMNEs with a home advantage against DMNEs competing with them in their home market. The author shows how EMNEs can capitalize on this advantage to obtain the intangibles they lack and need. The fact that these advantages are available on efficient global markets, while complementary local resources are not, explains the surprising speed of EMNE catch-up.

This study aims to investigate the impact of regular Kung Fu and Taekwondo practice on the health and quality of life among elderly individuals in the Maule region, Chile.

The authors designed a 12-week Kung Fu and Taekwondo workshop with activities suitable for their age. Through semistructured interviews (at the beginning and the end of the workshop), along with periodic monitoring of vital signs and cardiovascular components, the authors observed an improvement in participants’ physical (strength, speed of reaction and flexibility) and psychological conditions (self-esteem and resilience), quality of life (relationships with family and friends and ability to deal with stressful events in working life) and health (waist circumference, percentage of oxygen saturation in blood, blood pressure, among other values).

From these results, the authors affirm that this workshop improves health and physical condition and helps the participants develop the coping capacity to deal with stressful situations and complicated interpersonal relationships. In this sense, the authors conclude that Kung Fu and Taekwondo as regular sports activities can benefit senior citizens’ aging process.

This research is based on an original study project.

Firms can benefit from designing sales promotion based on the analysis of consumers' physical exercise and purchase data. This study aims to study mobile exercise app data to explore how purchasing a promoted or nonpromoted product affects exercisers’ subsequent exercise and purchase behaviors.

Drawing from the theoretical framework of overjustification effect, this study empirically examines the effects of the purchase of promoted – monetary and nonmonetary – or nonpromoted products on relationships (1) between past and subsequent exercise behaviors and (2) between past exercise and subsequent purchase behaviors. Novel data of one million exercise activities and purchase transactions created by 7,517 mobile exercise app users were collected.

The results reveal that monetary and nonmonetary promotions have a negative effect on overall consumers’ amount of physical exercise but increase heavy exercisers’ exercise amount. In addition, nonmonetary (monetary) promotion has a positive (negative) effect on consumers’ purchase expenditure but has no moderating effect on the exercise–expenditure relationship.

This study provides a theoretical framework explaining how to mitigate the dark side of sales promotions while targeting right exercise consumer segments with the right promotion campaigns.