Search results

The purpose of this study is to investigate the interaction between magnetotactic bacteria and Fe₃O₄–water nanofluid (NF) in a wavy enclosure in the presence of 2D natural convection flow.

Uniform magnetic field (MF), Brownian and thermophoresis effects are also contemplated. The dimensionless, time-dependent equations are governed by stream function, vorticity, energy, nanoparticle concentration and number of bacteria. Radial basis function-based finite difference method for the space derivatives and the second-order backward differentiation formula for the time derivatives are performed. Numerical outputs in view of isolines as well as average Nusselt number, average Sherwood number and flux density of microorganisms are presented.

Convective mass transfer rises if any of Lewis number, Peclet number, Rayleigh number, bioconvection Rayleigh number and Brownian motion parameter increases, and the flux density of microorganisms is an increasing function of Rayleigh number, bioconvection Rayleigh number, Peclet number, Brownian and thermophoresis parameters. The rise in buoyancy ratio parameter between 0.1 and 1 and the rise in Hartmann number between 0 and 50 reduce all outputs average Nusselt, average Sherwood numbers and flux density of microorganisms.

This study implies the importance of the presence of magnetotactic bacteria and magnetite nanoparticles inside a host fluid in view of heat transfer and fluid flow. The limitation is to check the efficiency on numerical aspect. Experimental observations would be more effective.

In practical point of view, in a heat transfer and fluid flow system involving magnetite nanoparticles, the inclusion of magnetotactic bacteria and MF effect provide control over fluid flow and heat transfer.

This is a scientific study. However, this idea may be extended to sustainable energy or biofuel studies, too. This means that a better world may create better social environment between people.

The presence of magnetotactic bacteria inside a Fe₃O₄–water NF under the effect of a MF is a good controller on fluid flow and heat transfer. Since the magnetotactic bacteria is fed by nanoparticles Fe₃O₄ which has strong magnetic property, varying nanoparticle concentration and Brownian and thermophoresis effects are first considered.

This study aims to analyze how the interplay between hard and soft elements of total quality management (TQM) produces the conditions for sustaining success in the quest for quality.

A qualitative analysis (Gioia method) was carried out on an original dataset collected through both direct and indirect methods (i.e. archival sources, interviews and observations) to generate a new interpretive framework.

The interpretative framework identifies four categories of elements: trigger elements create the starting conditions for a quality virtuous cycle; benchmarking tools set the standards of performance; improvement tools enable exploration of the space of possible alternative practices and finally, catalytic forces allow the institutionalization of effective techniques discovered in this search process into new standards.

The findings the authors present in this paper are derived by a single case study, limiting the generalizability of our results in other settings.

This study has three implications: first, the design of trigger elements is critical for the success of any TQM initiative; second, the interplay of improvement and benchmarking tools at several levels should be coherent and third, to exploit the potential of TQM, efforts should be devoted to the dissemination of new effective practices by means of catalyzing elements.

The model provides a more specific understanding of the nature and purpose of the hard and soft elements of TQM and the dynamic interaction between the two classes of elements over time.

Effective total quality management (TQM) practices rely on the accurate classification of critical success factors (CSFs). The impact matrix cross-reference multiplication technique for classification (MICMAC) or/and fuzzy MICMAC (FMICMAC) can be used to identify key factors in the complex set. However, TQM includes both “hard” and “soft” factors, limiting application of the traditional MICMAC/FMICMAC method.

Previous literature on TQM was reviewed, CSFs were identified, and factors were sorted into soft and hard categories. The combined fuzzy integration and dual-aspect MICMAC (fuzzy dual-aspect MICMAC approach) was then applied to identify, cluster and prioritize the CSFs of TQM.

A total of 20 factors (10 soft and 10 hard) were identified and isolated to assess the manufacturing- and service-related TQM practices of the Pearl River Delta Region of China. Seven driver factors and one linkage factor emerged as the key CSFs that managers should prioritize.

A major limitation of this study is the dependency of the results on the definitions of linguistic labels. If the linguistic definitions of TQM CSFs do not closely correspond to the expert opinion data, then the analysis results may be inaccurate. Additionally, although expert opinions are utilized in the proposed method for comprehensive assessments, these opinions may influence the final results due to their inherent subjectivity.

A novel fuzzy dual-aspect MICMAC approach was developed to identify and classify CSFs for optimal TQM practices. This approach allows clustering of CSFs so that decision-makers can prioritize factors according to their dependence and driving powers. Practitioners should concentrate on the CSFs with higher driving powers for successful TQM.

The purpose of this paper is to present current state of understanding on jet electrodeposition manufacturing; to compare various experimental parameters and their implication on as deposited features; and to understand the characteristics of jet electrodeposition deposition defects and its preventive procedures through available research articles.

A systematic review has been done based on available research articles focused on jet electrodeposition and its characteristics. The review begins with a brief introduction to micro-electrodeposition and high-speed selective jet electrodeposition (HSSJED). The research and developments on how jet electrochemical manufacturing are clustered with conventional micro-electrodeposition and their developments. Furthermore, this study converges on comparative analysis on HSSJED and recent research trends in high-speed jet electrodeposition of metals, their alloys and composites and presents potential perspectives for the future research direction in the final section.

Edge defect, optimum nozzle height and controlled deposition remain major challenges in electrochemical manufacturing. On-situ deposition can be used as initial structural material for micro and nanoelectronic devices. Integration of ultrasonic, laser and acoustic source to jet electrochemical manufacturing are current trends that are promising enhanced homogeneity, controlled density and porosity with high precision manufacturing.

This paper discusses the key issue associated to high-speed jet electrodeposition process. Emphasis has been given to various electrochemical parameters and their effect on deposition. Pros and cons of variations in electrochemical parameters have been studied by comparing the available reports on experimental investigations. Defects and their preventive measures have also been discussed. This review presented a summary of past achievements and recent advancements in the field of jet electrochemical manufacturing.

This study aims to reveal the constituents of seafaring service quality (physical and social environment) and their effects on seafarer employee satisfaction (job satisfaction and turnover intention) and analyse any differences among seafarer ranks. Literature on service quality has overlooked the transportation sector and seafaring in particular.

Seafaring service quality is measured by the workplace environment constituted of physical and social environments. Two types of employee (job) satisfaction were explored: overall job satisfaction and turnover intention. This study is based on a unique, large survey based on the Existence-Relatedness-Growth (ERG) needs theory. An exploratory factor analysis revealed four physical environment factors (Ship conditions, Communication facilities, Nautical health and Living conditions) and four social environment factors (Social fit, Team cohesion, Ship company support and Intercultural environment). Multi-group regression analysis assessed the effects of seafaring service quality on employee satisfaction.

The social environment has stronger effects than the physical environment on job satisfaction but not on employee retention. Team cohesion has strong effects on employee retention, while social fit has stronger effects on overall job performance. Seafarer ranks showed significant variations. The physical environment matters for 2nd engineers' and cadets’ job satisfaction but not for ratings, masters and chief officers. Team cohesion is significant to master, chief officer, engineer and cadet ranks but not for junior officers and ratings. Social fit has stronger effects on overall job performance than employee retention, particularly for ratings, cadets, master, chief officer and chief engineer ranks. Ship company support has the stronger effect on overall job satisfaction among all workplace factors; this is also observed across all ranks.

Motivation theories like the ERG theory can help understand service quality and employee satisfaction in the maritime sector; future studies should examine more behaviour variables/constructs from these theories.

Maritime companies can offer better services to seafarers, who are considered as key workers, by customising their interventions to specific seafarer ranks and developing a supportive culture that improves seafarer well-being.

This study examined the overlooked topic of maritime service quality based on a large-scale survey grounded on ERG theory and reveals how the physical and social environment has different effects on seafarer job satisfaction and retention.

This study investigates paradox-responding strategies and enabling mechanisms in humanitarian temporary supply networks (TSNs). Given the high stakes involved in life-saving supply networks, understanding how diverse, often under-resourced, organisations jointly tackle paradoxical tensions under time pressure is crucial.

A qualitative single case study approach is adopted and a TSN deployed to meet shelter needs following the 2015 Nepal earthquake is selected as the case. The authors use diverse secondary data sources to establish how the TSN responded to paradoxical tensions.

Results show that paradox-responding in humanitarian TSNs is ongoing, dynamic and a collective effort. Most strategies entail tackling the paradoxical tensions at the same time, using the same TSN structure, but there are differences in the treatment of the paradoxical elements. Additionally, the authors find that the execution of the responding strategies is enabled by the appropriate types of network-level mechanisms which can vary in novelty, complexity, depth and reach.

This study provides rich explanations of paradox-responding and develops insights into collective action within TSNs. However, further research is needed to extend and refine insights given the single-case setting design.

This study develops a framework of paradox-responding strategies and a corresponding mix of enabling mechanisms that can guide decision-makers in the humanitarian sector when deploying TSNs.

To the best of the authors' knowledge, this is the first study that investigates paradox-responding strategies in humanitarian TSNs in particular and enabling mechanisms in general.

The purpose of this paper is to study haemodynamic flow characteristics and entropy analysis in a bifurcated artery system subjected to stenosis, magnetohydrodynamic (MHD) flow and aneurysm conditions. The findings of this study offer significant insights into the intricate interplay encompassing electro-osmosis, MHD flow, microorganisms, Joule heating and the ternary hybrid nanofluid.

The governing equations are first non-dimensionalised, and subsequently, a coordinate transformation is used to regularise the irregular boundaries. The discretisation of the governing equations is accomplished by using the Crank–Nicolson scheme. Furthermore, the tri-diagonal matrix algorithm is applied to solve the resulting matrix arising from the discretisation.

The investigation reveals that the velocity profile experiences enhancement with an increase in the Debye–Hückel parameter, whereas the magnetic field parameter exhibits the opposite effect, reducing the velocity profile. A comparative study demonstrates the velocity distribution in Au-CuO hybrid nanofluid and Au-CuO-GO ternary hybrid nanofluid. The results indicate a notable enhancement in velocity for the ternary hybrid nanofluid compared to the hybrid nanofluids. Moreover, an increase in the Brinkmann number results in an augmentation in entropy generation.

This study investigates the flow characteristics and entropy analysis in a bifurcated artery system subjected to stenosis, MHD flow and aneurysm conditions. The governing equations are non-dimensionalised, and a coordinate transformation is applied to regularise the irregular boundaries. The Crank–Nicolson scheme is used to model blood flow in the presence of a ternary hybrid nanofluid (Au-CuO-GO/blood) within the arterial domain. The findings shed light on the complex interactions involving stenosis, MHD flow, aneurysms, Joule heating and the ternary hybrid nanofluid. The results indicate a decrease in the wall shear stress (WSS) profile with increasing stenosis size. The MHD effects are observed to influence the velocity distribution, as the velocity profile exhibits a declining nature with an increase in the Hartmann number. In addition, entropy generation increases with an enhancement in the Brinkmann number. This research contributes to understanding fluid dynamics and heat transfer mechanisms in bifurcated arteries, providing valuable insights for diagnosing and treating cardiovascular diseases.

Digital transformation (DT) is a major challenge for incumbent organisations, as research on this phenomenon has revealed a high failure rate. Given this consideration, this paper reviews the literature on DT in incumbent organisations to identify the main themes and research directions to be undertaken.

The authors adopt a systematic literature review (SLR) and computational literature review (CLR) employing a machine learning algorithm for topic modelling (LDA) to surface the themes discussed in 103 peer-reviewed studies published between 2010 and 2022 in a multidisciplinary article sample.

The authors identify and discuss the five main themes emerging from the studies, offering the state-of-the-art of DT in established firms' literature. The authors find that the most discussed topics revolve around the DT of healthcare, the process of renewal and change, the project management, the changes in value performances and capabilities and the consequences on the products of DT. Accordingly, the authors identify the topics overlooked by literature that future studies could tackle, which concern sustainability and contextualisation of the DT phenomenon.

The authors further propose managerial insights which equip managers with a revolutionary mindset that is not constraining but, rather, integration-seeking. DT is not only about technology (Tabrizi B et al., 2019). Successful DT initiatives require managerial capabilities that foster a sustainable departure from the current organising logic (Markus, 2004). This study pinpoints and prioritises the role that paradox-informed thinking can have to sustain an effective digital mindset (Eden et al., 2018) that allows for the building of momentum in DT initiatives and facilitates the renewal process. Indeed, managers lagging behind DT could shift from an “either-or” solutions mindset where one pole is preferred over the other (e.g. digital or physical) to embracing a “both-and-with” thinking balancing between poles (e.g. digital and physical) to successfully fuse the digital and the legacy (Lewis and Smith, 2022b; Smith, Lewis and Edmondson, 2022), enact the renewal, and build and maintain momentum for DTs. The outcomes of adopting a paradox mindset in managerial practice are enabling learning and creativity, fostering flexibility and resilience and, finally, unleashing human potential (Lewis and Smith, 2014).

The authors propose insight that will equip managers with a mindset that will allow DT to fail less often than current reported rates, which failure may imply potential organisational collapse, financial bankrupt and social crisis.

The authors offer a multidisciplinary review of the DT complementing existing reviews due to the focus on the organisational context of established organisations. Moreover, the authors advance paradoxical thinking as a novel lens through which to study DT in incumbent organisations by proposing an array of potential research questions and new avenues for research. Finally, the authors offer insights for managers to help them thrive in DT by adopting a paradoxical mindset.

This study explores the potential of paradox theory as a novel theoretical lens to investigate persistent and interdependent tensions in supply chains. It is based on a critical literature review focusing on paradoxes observed within complex supply chains in dynamic business environments, including the articles selected for this special issue, “Environmental Dynamism and Supply Chain Complexity: Managing the Paradoxes.”

This study introduces the key concepts and themes of the paradox theory literature and possible methodological approaches to studying paradoxes in supply chains. Through a literature review, this study also reflects on the current state of paradox research in the field of operations and supply chain management (OSCM) and proposes future research questions.

The application of paradox theory to OSCM research is in its early stages. This paper presents opportunities to explore persistent and interdependent tensions in supply chains using paradox theory.

The paper suggests several new research questions that should be translated into more precise propositions. The main implication for research is a call to focus attention on how and why a paradox perspective can help supply chain researchers view complex supply chain problems with fresh eyes.

The study provides the first critical review of paradoxical tensions in OSCM research. While the papers in this special issue contribute significantly to a better understanding of these issues, there is still significant potential for understanding how to respond to paradoxes in supply chains.

The modern day has seen an increase in the prevalence of the improvement of high-performance thermal systems for the enhancement of heat transmission. Numerous studies and research projects have been carried out to acquire an understanding of heat transport performance for their functional application to heat conveyance augmentation. The idea of this study is to inspect the entropy production in Darcy-Forchheimer Ree-Eyring nanofluid containing bioconvection flow toward a stretching surface is the topic of discussion in this paper. It is also important to take into account the influence of gravitational forces, double stratification, heat source–sink and thermal radiation. In light of the second rule of thermodynamics, a model of the generation of total entropy is presented.

Incorporating boundary layer assumptions allows one to derive the governing system of partial differential equations. The dimensional flow model is transformed into a non-dimensional representation by applying the appropriate transformations. To deal with dimensionless flow expressions, the built-in shooting method and the BVP4c code in the Matlab software are used. Graphical analysis is performed on the data to investigate the variation in velocity, temperature, concentration, motile microorganisms, Bejan number and entropy production concerning the involved parameters.

The authors have analytically assessed the impact of Darcy Forchheimer's flow of nanofluid due to a spinning disc with slip conditions and microorganisms. The modeled equations are reset into the non-dimensional form of ordinary differential equations. Which are further solved through the BVP4c approach. The results are presented in the form of tables and figures for velocity, mass, energy and motile microbe profiles. The key conclusions are: The rate of skin friction incessantly reduces with the variation of the Weissenberg number, porosity parameter and Forchheimer number. The rising values of the Prandtl number reduce the energy transmission rate while accelerating the mass transfer rate. Similarly, the effect of Nb (Brownian motion) enhances the energy and mass transfer rates. The rate of augments with the flourishing values of bioconvection Lewis and Peclet number. The factor of concentration of microorganisms is reported to have a diminishing effect on the profile. The velocity, energy and entropy generation enhance with the rising values of the Weissenberg number.

According to the findings of the study, a slip flow of Ree-Eyring nanofluid was observed in the presence of entropy production and heat sources/sinks. There are features when the implementations of Darcy–Forchheimer come into play. In addition to that, double stratification with chemical reaction characteristics is presented as a new feature. The flow was caused by the stretching sheet. It has been brought to people's attention that although there are some investigations accessible on the flow of Ree-Eyring nanofluid with double stratification, they are not presented. This research draws attention to a previously unexplored topic and demonstrates a successful attempt to construct a model with distinctive characteristics.