Search results

This paper aims to propose two solution approaches to determine the number of ground transport vehicles that are required to ensure the on-time delivery of military equipment between origin and destination node pairs in some geographic region, which is an important logistics problem at the US Transportation Command.

The author uses a mathematical program and a traditional heuristic to provide optimal and near-optimal solutions, respectively. The author also compares the approaches for random, small-scale problems to assess the quality and computational efficiency of the heuristic solution, and also uses the heuristic to solve a notional, large-scale problem typical of real problems.

This work helps analysts identify how many ground transport vehicles are needed to meet cargo delivery requirements in any military theater of operation.

This research assumes all problem data is deterministic, so it does not capture variations in requirements or transit times between nodes.

This work provides prescriptive details to military analysts and decision-makers in a timely manner. Prior to this work, insights for this type of problem were generated using time-consuming simulation taking about a week and often involving trial-and-error.

This research provides new methods to solve an important logistics problem. The heuristic presented in this paper was recently used to provide operational insights about ground vehicle requirements to support a geographic combatant command and to inform decisions for railcar recapitalization within the US Army.

In this paper, the authors introduced a real world new problem, the multi-trip vehicle routing problem with time windows and the possible use of a less-than-truckload carrier to satisfy customer demands. The purpose of this paper is to develop a heuristic algorithm to route the private trucks with time windows and to make a selection between truckload and less-than-truckload carriers by minimizing a total cost function.

Both mathematical model and heuristic algorithm are developed for routing the private trucks with time windows and for selecting of less-than-truckload carriers by minimizing the total cost function.

In all, 40 test problems were examined with the heuristics. Computational results show that the algorithm obtains the optimal or near-optimal solutions efficiently in terms of time and accuracy.

The research described in this paper differs from the previous one on fleet planning or vehicle routing, in that it modifies the Clarke and Wright method by shifting the performance measure from a distance to cost and also incorporates the fixed cost of different types of trucks into the model. In addition, the authors simultaneously consider the multiple trip vehicle routing problems with time windows and the selection of less-than-truckload carriers that is an integrated scenario of real-world application. To the best of the authors’ knowledge, this scenario has not been considered in the literature.

The aim of this work is to research and design an expert diagnosis system for rail vehicle driven by data mechanism models.

The expert diagnosis system utilizes statistical and deep learning methods to model the real-time status and historical data features of rail vehicle. Based on data mechanism models, it predicts the lifespan of key components, evaluates the health status of the vehicle and achieves intelligent monitoring and diagnosis of rail vehicle.

The actual operation effect of this system shows that it has improved the intelligent level of the rail vehicle monitoring system, which helps operators to monitor the operation of vehicle online, predict potential risks and faults of vehicle and ensure the smooth and safe operation of vehicle.

This system improves the efficiency of rail vehicle operation, scheduling and maintenance through intelligent monitoring and diagnosis of rail vehicle.

To assess the introduction and performance of light electric freight vehicles (LEFVs), more specifically cargo cycles in major 3PL organizations in at least two Nordic countries.

Case studies. Interviews. Company data on performance before as well as after the introduction. Study of differing business models as well as operational setups.

The results from the studied cases show that LEFVs can compete with conventional vans in last mile delivery operations of e-commerce parcels. We account for when this might be the case, during which circumstances and why.

Inherent limitations of the case study approach, specifically on generalization. Future research to include more public–private partnership and multi-actor approach for scalability.

Adding to knowledge on the public sector facilitation necessary to succeed with implementation and identifying cases in which LEFVs might offer efficiency gains over more traditional delivery vehicles.

One novelty is the access to detailed data from before the implementation of new vehicles and the data after the implementation. A fair comparison is made possible by the operational structure, area of delivery, number of customers, customer density, type of packages, and to some extent, the number of packages being quite similar. Additionally, we provide data showing how city hubs can allow cargo cycles to work synergistically with delivery vans. This is valuable information for organizations thinking of trying LEFVs in operations as well as municipalities/local authorities that are interested.

As of December 2022, there were 119,000 gas stations, 10,800 gas stations and 4,488,000 charging piles nationwide, while the number of vehicles reached 312 million, including 11.49 million new energy vehicles. The imbalance between transportation energy supply and energy replenishment demand leads to crowded queues of vehicles at some stations and idle resources in others. How to reduce the phenomenon of large queues and improve the utilization rate of idle resources is the key to alleviating the imbalance between supply and demand.

Therefore, from the perspective of spatio-temporal equilibrium of urban transportation energy supply stations, multi-energy supply station cooperation is established in view of the phenomenon of large spatio-temporal differences among different energy supply stations, and corresponding inducing strategies are adopted for energy supplement vehicles in the road network, so that part of queued users go to energy supply stations with fewer vehicles, so as to balance the supply and demand of transportation energy in the region. On this basis, the income distribution of urban transportation energy supply station is discussed.

The total revenue after the cooperation was 13,095, an increase of 22.9%. Secondly, in terms of distribution rationality, three impact factors are selected and Shapley correction value is used to distribute the total income. Compared with independent operation, both sites have a certain degree of increase.

Traffic congestion at energy supply stations is closely related to the number, location and number of vehicles at energy supply stations. Therefore, using a cooperative approach of energy trading cannot solve the queuing problem. In addition, there are a few research results on the equalization of energy supply station services considering time-of-use pricing. However, these studies do not consider the vehicular grooming at congested stations. As far as the authors know, there are no relevant research results in the research on the service equilibrium of energy supply stations based on cooperative games.

Purpose – The purpose of this study is to develop a numerical framework to predict the time-dependent probability of failure of a bridge subjected to multiple vehicle impacts. Specially, this study focuses on investigating the inter-relationship between changes in life-cycle parameters (e.g., damage size caused by vehicle impact, loss of initial structural capacity, and threshold intervention) and bridges probability of failure.

Design/Methodology/Approach – The numerical procedure using MATLAB program is developed to compute the probability failure of a bridge. First, the importance and characteristics of life-cycle analysis is described. Then, model for damage accumulation and life cycle as a result of heavy vehicle impacts is discussed. Finally, the probability of failure of a bridge subjected to vehicle impacts as a result of change in life-cycle parameters is presented.

Findings – The results of study show that damage size caused by both vehicle impacts and loss of initial structural capacity have a great impact on the long-term safety of bridges. In addition, the probability of failure of a bridge under different threshold limits indicates that the structural intervention (e.g., repair or maintenance) should be undertaken to extend the service life of a bridge.

Research Limitations/Implications – The damage sizes caused by heavy vehicle impacts are based on simple assumptions. It is suggested that there would be a further study to estimate the magnitude of bridge damage as a result of vehicle impact using the full-scale impact test or computational simulation.

Practical Implications – This will allow much better predictions for residual life of bridges which could potentially be used to support decisions on health and maintenance of bridges.

Originality/Value – The life-cycle performance for assessing the time-dependent probability of failure of bridges subjected to multiple vehicle impact has not been fully discussed so far.

The safety and reliability of high-speed trains rely on the structural integrity of their components and the dynamic performance of the entire vehicle system. This paper aims to define and substantiate the assessment of the structural integrity and dynamical integrity of high-speed trains in both theory and practice. The key principles and approaches will be proposed, and their applications to high-speed trains in China will be presented.

First, the structural integrity and dynamical integrity of high-speed trains are defined, and their relationship is introduced. Then, the principles for assessing the structural integrity of structural and dynamical components are presented and practical examples of gearboxes and dampers are provided. Finally, the principles and approaches for assessing the dynamical integrity of high-speed trains are presented and a novel operational assessment method is further presented.

Vehicle system dynamics is the core of the proposed framework that provides the loads and vibrations on train components and the dynamic performance of the entire vehicle system. For assessing the structural integrity of structural components, an open-loop analysis considering both normal and abnormal vehicle conditions is needed. For assessing the structural integrity of dynamical components, a closed-loop analysis involving the influence of wear and degradation on vehicle system dynamics is needed. The analysis of vehicle system dynamics should follow the principles of complete objects, conditions and indices. Numerical, experimental and operational approaches should be combined to achieve effective assessments.

The practical applications demonstrate that assessing the structural integrity and dynamical integrity of high-speed trains can support better control of critical defects, better lifespan management of train components and better maintenance decision-making for high-speed trains.

The purpose of this research is to explore the utility of autonomous transport across two independent airframe maintenance operations at a single location.

This study leveraged discrete event simulation that encompassed real-world conditions on a United States Air Force flight line. Though the Theory of Constraints (TOC) lens, a high-demand, human-controlled delivery asset is analyzed and the impact of introducing an autonomous rover delivery vehicle is assessed. The authors’ simulations explored varying numbers and networks of rovers as alternative sources of delivery and evaluated these resources’ impact against current flight line operations.

This research indicates that the addition of five autonomous rovers can significantly reduce daily expediter delivery tasks, which results in additional expertise necessary to manage and execute flight line operations. The authors assert that this relief would translate into enhancements in aircraft mission capable rates, which could increase overall transport capacity and cascade into faster cargo delivery times, systemwide. By extension, the authors suggest overall inventory management could be improved through reduction in transportation shipping time variance, which enhances the Department of Defense’s overall supply chain resilience posture.

When compared against existing practices, this novel research provides insight into actual flight line movement and the potential benefits of an alternative autonomous delivery system. Additionally, the research measures the potential savings in the workforce and vehicle use that exceeds the cost of the rovers and their employment.

As the strategy of 5G new infrastructure is deployed and advanced, 5G-R becomes the primary technical system for future mobile communication of China’s railway. V2V communication is also an important application scenario of 5G communication systems on high-speed railways, so time synchronization between vehicles is critical for train control systems to be real-time and safe. How to improve the time synchronization performance in V2V communication is crucial to ensure the operational safety and efficiency of high-speed railways.

This paper proposed a time synchronization method based on model predictive control (MPC) for V2V communication. Firstly, a synchronous clock for V2V communication was modeled based on the fifth generation mobile communication-railway (5G-R) system. Secondly, an observation equation was introduced according to the phase and frequency offsets between synchronous clocks of two adjacent vehicles to construct an MPC-based space model of clock states of the adjacent vehicles. Finally, the optimal clock offset was solved through multistep prediction, rolling optimization and other control methods, and time synchronization in different V2V communication scenarios based on the 5G-R system was realized through negative feedback correction.

The results of simulation tests conducted with and without a repeater, respectively, show that the proposed method can realize time synchronization of V2V communication in both scenarios. Compared with other methods, the proposed method has faster convergence speed and higher synchronization precision regardless of whether there is a repeater or not.

This paper proposed an MPC-based time synchronization method for V2V communication under 5G-R. Through the construction of MPC controllers for clocks of adjacent vehicles, time synchronization was realized for V2V communication under 5G-R by using control means such as multistep prediction, rolling optimization, and feedback correction. In view of the problems of low synchronization precision and slow convergence speed caused by packet loss with existing synchronization methods, the observer equation was introduced to estimate the clock state of the adjacent vehicles in case of packet loss, which reduces the impact of clock error caused by packet loss in the synchronization process and improves the synchronization precision of V2V communication. The research results provide some theoretical references for V2V synchronous wireless communication under 5G-R technology.

With the aid of naturalistic simulations, this paper aims to investigate human behavior during manual and autonomous driving modes in complex scenarios.

The simulation environment is established by integrating virtual reality interface with a micro-simulation model. In the simulation, the vehicle autonomy is developed by a framework that integrates artificial neural networks and genetic algorithms. Human-subject experiments are carried, and participants are asked to virtually sit in the developed autonomous vehicle (AV) that allows for both human driving and autopilot functions within a mixed traffic environment.

Not surprisingly, the inconsistency is identified between two driving modes, in which the AV’s driving maneuver causes the cognitive bias and makes participants feel unsafe. Even though only a shallow portion of the cases that the AV ended up with an accident during the testing stage, participants still frequently intervened during the AV operation. On a similar note, even though the statistical results reflect that the AV drives under perceived high-risk conditions, rarely an actual crash can happen. This suggests that the classic safety surrogate measurement, e.g. time-to-collision, may require adjustment for the mixed traffic flow.

Understanding the behavior of AVs and the behavioral difference between AVs and human drivers are important, where the developed platform is only the first effort to identify the critical scenarios where the AVs might fail to react.

This paper attempts to fill the existing research gap in preparing close-to-reality tools for AV experience and further understanding human behavior during high-level autonomous driving.

This work aims to systematically analyze the inconsistency in driving patterns between manual and autopilot modes in various driving scenarios (i.e. multiple scenes and various traffic conditions) to facilitate user acceptance of AV technology.

A close-to-reality tool for AV experience and AV-related behavioral study. A systematic analysis in relation to the inconsistency in driving patterns between manual and autonomous driving. A foundation for identifying the critical scenarios where the AVs might fail to react.