Search results

In this study, 2D density-based SST K-turbulence model with compressibility effect is used to observe the flow separation and shock wave interactions of the flow. The wall static pressure and Mach number differences are also evaluated. This study aims to discuss the aforementioned objectives

This study outlines the evaluation of the performance of a 2D convergent–divergent nozzle with various triangular jet tab configurations that can be used for effective thrust vectoring of aerial vehicles.

From the study, it is seen that the shadow effect induced by the tab with a height of 30% produces higher oblique wave deflection and higher thrust deflection at the exit nozzle. The numerical calculation concluded that thrust vector efficiency of 30% jet tab is, 0.46%. In the case of 10% jet tab height the thrust vector efficiency is higher, i.e. 1.647%.

2D study.

The optimization will open up a new focus in TVC that can be implemented for effective attitude control in aircrafts.

Used in future aircrafts.

The influence of shadowing ratio with different tab heights at different Mach numbers has not been reported in the previous studies. Few of the studies on jet tab are focused on the acoustic studies and not pertaining to the aerodynamic aspects. The multi jet configuration, the combination of location, shapes and other parametric analysis have not been covered in the previous studied.

Chemical reaction effects are added to the governing equation. This paper aims to get the solution by converting the partial differential equation into an ordinary differential equation and solve using a perturbation scheme and applying the boundary conditions.

In this paper, the authors discussed the chemical reaction effects of heat and mass transfer on megnato hydro dynamics free convective rotating flow of a visco-elastic incompressible electrically conducting fluid past a vertical porous plate through a porous medium with suction and heat source. The authors analyze the effect of time dependent fluctuating suction on a visco-elastic fluid flow.

Using variable parameters of the fluid, the velocity, temperature and concentration of the fluid are analyzed through graphs.

The velocity profile reduces by increasing the values of thermal Grashof number (G_r), mass Grashof number (G_c) and the magnetic parameter (M). On the other hand, the velocity profile gets increased by increasing the permeability parameter (K). The temperature profile decreases by raising the value of Prandtl number (P_r) and frequency of oscillation parameter (ω). However, the source parameter (S) has the opposite effect on the temperature profile. The concentration profile reduces in all points by raising the chemical reaction parameter K_l, Schmidt number S_c, frequency of oscillation ω and the time t.

This study aims to compile the present situation of comparative advertisement in Indian markets and the existing legal remedies by citing some factual cases from the industry and important judicial pronouncements.

It is a qualitative research based on primary and secondary source of information. Secondary sources comprise of statutory provisions of relevant act, articles/news items available in academic/trade journals and information generated from Government of India web sites. Primary research involved face-to-face interactions with practising advocates from Delhi High Court and Supreme Court of India in the area of trademarks. Information was collected on parameters related to efficacy, applicability, enforceability, monitoring, and legal issues of trademarks and disparagements.

In India, comparative advertisement is relatively a new concept and the lawful remedies are not that strong as that is other countries. In the absence of the stringent laws, the practice of comparative advertisement has seen many derogatory consequences a few are mentioned here. The paper concludes by giving recommendations on the issues of legal aspects of comparative advertisement in India.

This research paper attempts to provide an overall understanding of judicial environment on comparative advertisement in India which is still at its nascent stage.

Prior literature demonstrates that the effectiveness of bank monitoring decreases when multiple banks are involved, due to a free rider problem, leading to lower firm value. The purpose of this paper is to investigate whether this free rider problem exists in an emerging market context, and whether the relationship between multiple banking relationships and firm value is conditioned on bankers’ incentives to monitor.

The authors use multivariate panel regression to examine the hypotheses. The conditioning effect of the incentive to govern (the amount of average bank lending) is modeled using an interaction variable. Based on the result of the Hausman test, the authors employ two-way fixed effects estimator to estimate the coefficients.

First, the negative relationship between multiple banking relationships and firm value holds true among Indian firms. Second, the authors show that this negative relationship is lessened for firms with high average bank debt or higher free cash flows. The analyses suggest that these moderating effects are related to a reduction in the free rider problem rather than a decrease in financial constraints. However, these results are only significant among larger firms.

Prior literature has not considered the conditioning impact of the “incentives to govern” when examining the free rider problem, inherent in situations where multiple actors are involved. The authors show in this study that the free rider problem disappears when the incentives to govern are considered in the overall research framework.

The main purpose of this paper is to outline the antecedents of patient satisfaction in the field of medical tourism (MT) applying extant literature and to develop a conceptual model based on the review.

This paper presents a thorough review of prior studies related to the antecedents of patient satisfaction in the MT sector. Moreover, it provides the theoretical base that helped the researcher to identify significant relationship between the patient satisfaction and its antecedents.

The researchers identified the prominent antecedents of patient satisfaction and present the potential interrelationships between different antecedents of patient satisfaction such as treatment quality, cost attractiveness, destination image and service quality with patient satisfaction based on the review.

The results have momentous practical implications as they will help researchers to better understand the antecedents of patient satisfaction and their potential inter linkages with patient satisfaction in MT sector. The conceptual model derived from the review may guide the actions of researchers as well as practitioners in the MT industry as a whole. The present study provides insights for further research in the MT sector and thereby helps to further enrich the existing theoretical base of the MT.

The study brings together the scattered knowledge from the broad and extensive range of medical or health tourism and cognate literature which indicate ideological differences among various aspects of MT as well as potential factors determining patient satisfaction in MT sector (antecedents of satisfaction). The newly developed model incorporates a new construct called “treatment quality” as different from “service quality,” which is a widely used construct to explain customer satisfaction. The antecedents of patient satisfaction and their inter-linkages with patient satisfaction provide a sound theoretical foundation for the future studies.

This study aims to develop a trust mechanism in a Vehicular ad hoc Network (VANET) based on an optimized deep learning for selfish node detection.

The authors built a deep learning-based optimized trust mechanism that removes malicious content generated by selfish VANET nodes. This deep learning-based optimized trust framework is the combination of the Deep Belief Network-based Red Fox Optimization algorithm. A novel deep learning-based optimized model is developed to identify the type of vehicle in the non-line of sight (nLoS) condition. This authentication scheme satisfies both the security and privacy goals of the VANET environment. The message authenticity and integrity are verified using the vehicle location to determine the trust level. The location is verified via distance and time. It identifies whether the sender is in its actual location based on the time and distance.

A deep learning-based optimized Trust model is used to detect the obstacles that are present in both the line of sight and nLoS conditions to reduce the accident rate. While compared to the previous methods, the experimental results outperform better prediction results in terms of accuracy, precision, recall, computational cost and communication overhead.

The experiments are conducted using the Network Simulator Version 2 simulator and evaluated using different performance metrics including computational cost, accuracy, precision, recall and communication overhead with simple attack and opinion tampering attack. However, the proposed method provided better prediction results in terms of computational cost, accuracy, precision, recall, and communication overhead than other existing methods, such as K-nearest neighbor and Artificial Neural Network. Hence, the proposed method highly against the simple attack and opinion tampering attacks.

This paper proposed a deep learning-based optimized Trust framework for trust prediction in VANET. A deep learning-based optimized Trust model is used to evaluate both event message senders and event message integrity and accuracy.

The purpose of this paper is to design multiplexers (MUXs) based on ternary half subtractor and full subtractor using carbon nanotube field-effect transistors.

Conventionally, the binary logic functions are developed by using the binary decision diagram (BDD) systems. Each node in BDD is replaced by 2:1 MUX to implement the digital circuits. Similarly, in the ternary decision diagram, each node has to be replaced by 3:1 MUX. In this paper, ternary transformed BDD is used to design the ternary subtractors using 2:1 MUXs.

The performance of the proposed ternary half subtractor and full subtractor using the 2:1 MUX are compared with the 3:1 MUX-based ternary circuits. It has been observed that the delay, power and power delay product values are reduced, respectively, by 67.6%, 84.3%, 94.9% for half subtractor and 67.7%, 70.1%, 90.3% for full subtractor. From the Monte Carlo simulations, it is observed that the propagation delay and power dissipation of the proposed subtractors are increased by increasing the channel length due to process variations. The stability test is also performed and observed that the stability increases as the channel length and diameter are increased.

The proposed half subtractor and full subtractor show better performance over the existing subtractors.

Financial capability is considered to be an important concept that has drawn the attention of many world nations. While the literature suggests various studies on financial capability and financial wellbeing, focus on their combined significance has been limited. The purpose of this paper is to examine how financial capability affects the financial wellbeing of women in community-based organizations and how decision-making ability mediated this relationship.

In total, 1,000 women who are associated with the community-based organization – Kudumbashree in the state of Kerala, India participated in the survey-based study.

The structural equation modelling results show that there exists a significant relationship between financial capability and the financial wellbeing of women in CBOs. Further, decision-making ability was identified as a significant mediator in this relationship thus establishing a partial mediation effect.

The financial social workers can focus their activities on promoting financial capability and decision making aspects of women from middle/low income families to facilitate their financial wellbeing. The scope for financial socialisation and proper orientation is more for the women associated with the community based organisations. This opportunity can be made use by the government authorities and other practitioners to change their financial outlook and contribute towards the empowerment of these women from the grass root level.

The studies related to financial literacy and financial inclusion are available in the Indian context, but the conceptualization of financial capability is still an under-researched area in India. Hence, this study is an attempt to explain the capability-wellbeing relationship from a financial point of view in the Indian context, and further establishes its connection with the individual's decision-making ability. To strengthen the research base, the study was conducted among the women in the community-based organization who belong to middle and low-income families.

The purpose of this paper is to study numerically the influence of a magnetic field on the transient free convective boundary layer flow of a nanofluid over a moving semi-infinite vertical cylinder with heat transfer

The problem is governed by the coupled non-linear partial differential equations with appropriate boundary conditions. The fluid is a water-based nanofluid containing nanoparticles of copper. The Brinkman model for dynamic viscosity and Maxwell–Garnett model for thermal conductivity are used. The governing boundary layer equations are written according to The Tiwari–Das nanofluid model. A robust, well-tested, implicit finite difference method of Crank–Nicolson type, which is unconditionally stable and convergent, is used to find the numerical solutions of the problem. The velocity and temperature profiles are studied for significant physical parameters such as the magnetic parameter, nanoparticles volume fraction and the thermal Grashof number Gr. The local skin-friction coefficient and the Nusselt number are also analysed and presented graphically.

The present computations have shown that an increase in the values of either magnetic parameter M or nanoparticle volume fraction decreases the local skin-friction coefficient, whereas the opposite effect is observed for thermal Grashof number Gr. The local Nusselt number increases with a rise in Gr and ϕ values. But an increase in M reduces the local Nusselt number.

This paper is relatively original and presents numerical investigation of transient two-dimensional laminar boundary layer free convective flow of a nanofluid over a moving semi-infinite vertical cylinder in the presence of an applied magnetic field. The present study is of immediate application to all those processes which are highly affected by heat enhancement concept and a magnetic field. Further the present study is relevant to nanofluid materials processing, chemical engineering coating operations exploiting nanomaterials and others.

This paper aims to explore particle shape effect on Cu-H₂O nanoparticles over a moving plate in the presence of nonlinear thermal radiation. To characterize the effect, particle shape and viscous dissipation are considered. Convergent solutions for the resulting nonlinear systems are derived and the effects of embedded parameters of interest on velocity and temperature field are examined.

The Runge–Kutta–Fehlberg fourth-fifth order method along with shooting technique is used to solve the governing equations (6) and (7) with boundary conditions (8). A suitable finite value of η_∞ is considered in such a way that the boundary conditions are satisfied asymptotically.

The results show an increase in both the heat transfer and thermodynamic performance of the system. However, among the three nanoparticle shapes, disk shape exhibited better heat transfer characteristics and heat transfer rate. On the other hand, the velocity profile enhances with increasing values of ϕ in the first solution, but the opposite trend was found in the second solution.

The present paper deals with an exploration of particle shape effect on Cu-H₂O nanoparticles over a moving plate in the presence of nonlinear thermal radiation. To characterize the effect, particle shape and viscous dissipation are considered. Convergent solutions for the resulting nonlinear systems are derived and the effects of embedded parameters of interest on velocity and temperature field are examined. The skin friction coefficient and Nusselt number are numerically tabulated and discussed. The results show an increase in both heat transfer and thermodynamic performance of the system. However, among the three nanoparticle shapes, disk shape exhibited better heat-transfer characteristics and heat-transfer rate. On the other hand, the velocity profile enhances with increasing values of ϕ in the first solution, but the opposite trend was found in the second solution.