Search results

A delamination fracture analysis of two-dimensional functionally graded multilayered end-loaded split beam configuration with non-linear mechanical behaviour of material is conducted. The beam is made of an arbitrary number of longitudinal layers. Perfect adhesion between layers is assumed. The material is two-dimensional functionally graded in the cross-section of each layer. Also, each layer has individual thickness and material properties. A delamination crack is located arbitrary along the beam height. The paper aims to discuss these issues.

The delamination fracture behaviour is investigated analytically in terms of the strain energy release rate by analysing the balance of the energy. An additional analysis of the delamination fracture is performed by applying the J-integral approach for verification.

The solutions derived are used to evaluate the effects of crack location, material gradients and material non-linearity on the delamination fracture behaviour of end-loaded split beam. The effect of material gradient on the distribution of the J-integral value along the crack front is elucidated too.

Delamination in the multilayered functionally graded end-loaded split beam exhibiting non-linear mechanical behaviour of the material is analysed assuming that the material property is distributed non-linearly in both thickness and width directions in each layer.

The purpose of this paper is to present an analytical study of the delamination fracture behaviour of a multilayered two-dimensional functionally graded cantilever beam configuration. A delamination crack is located arbitrary along the height of the beam cross-section. The layers have different thicknesses and material properties. Perfect adhesion is assumed between layers. The material is functionally graded in both thickness and width directions in each layer. Besides, the material of the beam exhibits non-linear-elastic behaviour.

The delamination fracture behaviour is analysed in terms of the strain energy release rate. The J-integral approach is applied in order to verify the analysis of the strain energy release rate developed in the present paper.

The influence of material properties, the crack location along the height of the beam cross-section and the non-linear behaviour of the material on the delamination fracture is examined.

A non-linear delamination fracture analysis of multilayered two-dimensional non-symmetric functionally graded beam configuration is developed.

The authors examined the numerical natural frequency analysis of a 2D functionally graded (FG) truncated thick hollow cone using 3D elasticity theory.

The material properties of the 2D-FGM (two dimensional-functionally graded materials) cone are graded along the radial and axial axes of the cone using a power–law distribution. The eigenvalue problem was solved using finite element analysis (FEA) employing graded hexahedral elements, and the verification of the finite element approach was assessed by comparing the current solution to earlier experimental studies.

The effects of semivertex angle, material distribution and the cone configuration on the natural frequencies have been analyzed. For various semivertex angles, thickness, length and power law exponents, many results in the form of natural frequencies and mode shapes are presented for the 2D-FGM cone. As a result, the effects of the given parameters were addressed, and the results were compared, demonstrating the direct efficiency of raising the power–law exponents and cone thickness on the rise of natural frequencies.

For the first time, the numerical natural frequency analysis of a 2D-FG truncated thick hollow truncated cone based on 3D equations of elasticity has been investigated. The material properties of the truncated cone have been distributed along two directions, which has not been considered before in any research for the truncated thick cone. The reason for using these innovative volume fraction functions is the lack of accurate coverage by functions that are available in the literature (Asemi et al., 2011; Babaei et al. 2021).

The purpose of the study is to perform elastic stress and deformation analysis of a functionally graded hollow disk under different conditions (rotation, gravity, internal pressure, temperature with variable heat generation) and their combinations.

The classical method of solution, Navier's equation, is used to solve the governing equation. The analysis considers thermal and mechanical boundary conditions and takes into account the variation of material properties according to a power law function of the radius of the disk and grading parameter.

The findings of the study reveal distinct trends and behaviors based on different grading parameters. The influence of gravity is found to be negligible, resulting in similar patterns to the pure rotation case. Variable heat generation introduces non-linear temperature profiles and higher displacements, with stress values influenced by grading parameters.

The study provides valuable insights into the behavior of displacement and stresses in hollow disks, offering a deeper understanding of their mechanical response under varying conditions. These insights can be useful in the design and analysis of functionally graded hollow disks in various engineering applications.

The originality and value of this study lies in the consideration of various loading combinations of rotation, gravity, internal pressure and temperature with variable heat generation. Furthermore, the study of effect of various angular rotations, temperatures and pressures expands the understanding of the mechanical behavior of such structures, contributing to the existing body of knowledge in the field.

The main objective of this study is to develop a numerical model based on Isogeometric Analysis to study the dynamic behavior of multi-directional functionally graded plates with variable thickness.

A numerical study was conducted on the dynamic behavior of multi-directional functionally graded plates. Rectangular and circular plates with variable thickness are taken into investigation. The third-order shear deformation plate theory of Reddy is used to describe the displacement field, while the equation of motion is developed based on the Hamilton's principle. Isogeometric Analysis approach is employed as a discretization tool to develop the system equation, where NURBS basis functions are used. The famous Newmark method is used to solve time-dependent problems.

The results obtained from this study indicated that the thickness gradation has a more considerable effect than in-plane variation of materials in MFGM plates. Additionally, the influence of the damping factor is observed to affect the vibration amplitude of the plate. The results obtained from this study could be used for future investigations, where the viscous elasticity and other dynamic factors are considered.

Although there have been a number of studies in the literature devoted to analyzing the linear static bending and free vibration of FGM and MFGM plates with variable thickness, the study on dynamic response of FGM and MFGM plate is still limited. Therefore, this study is dedicated to the investigation of the dynamic behavior of multi-directional functionally graded plates.

As a good absorbing material candidate, a functionally graded wave absorber can be tailored to satisfy the impedance match principle by gradually changing material property. The paper aims to discuss these issues.

The electromagnetic wave absorption properties are discussed. An analysis model is proposed to provide an insight into its mechanical characteristics during wave absorption. Considering the energy-converting and thermal deformation properties, the thermoelastic behaviors of an absorber are analyzed by numerical method. The effects of material and geometrical properties are discussed in detail.

The results demonstrate that absorbing effect of graded composite is enhanced. Good performance of low reflectance and high absorption with gentle thermal stress distribution can be obtained by proper designing of the gradient absorber.

Functionally graded materials exhibit a progressive compositional gradient change along certain dimension of structures, which can be used as absorbing materials for the gradual change of material property tailored to satisfy the principle of impedance match. The design of functionally graded absorbing materials usually should consider not only the electromagnetic performance, but also the mechanical properties simultaneously. Therefore, few investigations have addressed the mechanical characteristics of absorbers. This paper presents some studies on the electromagnetic, especially mechanical behaviors during electromagnetic wave absorption. It is helpful to provide mechanical reference for designing an absorber.

Apart from the geometries to be dealt with, rapid prototyping (RP) of heterogeneous objects requires additional material information to be processed. This generally involves a large amount of information to be processed simultaneously. The robustness and efficiency problems, which seem less critical in homogeneous solid fabrications, become an issue. The direct impetus of this paper is to present robust and efficient algorithms for RP of heterogeneous objects.

The robustness is benefited from using the proposed non‐manifold heterogeneous cellular model, which guarantees gap‐free material depositions around material interfaces. The efficiency enhancement is achieved by eliminating repetitive boundary intersections and using a heuristic material interrogation approach.

By using the proposed algorithms, the robustness and efficiency of RP of heterogeneous objects can be improved. It is found that an average 30 percent efficiency improvement is obtained using the proposed heuristic material interrogation approach.

Non‐manifold heterogeneous cell representation (HC‐Rep) is used in RP fields for the first time. Based on the HC‐Rep, the robustness and efficiency of RP of heterogeneous object is addressed in this paper.

This paper aims to provide a comprehensive review of the state-of–the-art design methods for additive manufacturing (AM) technologies to improve functional performance.

In this survey, design methods for AM to improve functional performance are divided into two main groups. They are design methods for a specific objective and general design methods. Design methods in the first group primarily focus on the improvement of functional performance, while the second group also takes other important factors such as manufacturability and cost into consideration with a more general framework. Design methods in each groups are carefully reviewed with discussion and comparison.

The advantages and disadvantages of different design methods for AM are discussed in this paper. Some general issues of existing methods are summarized below: most existing design methods only focus on a single design scale with a single function; few product-level design methods are available for both products’ functionality and assembly; and some existing design methods are hard to implement for the lack of suitable computer-aided design software.

This study is a useful source for designers to select an appropriate design method to take full advantage of AM.

In this survey, a novel classification method is used to categorize existing design methods for AM. Based on this classification method, a comprehensive review is provided in this paper as an informative source for designers and researchers working in this field.

The purpose of this paper is to analyse the transient effects in a functionally graded photo-thermoelastic (TE) medium with gravity and rotation by considering two generalised TE theories: Lord–Shulman (LS) and Green–Lindsay (GL). The governing equations are derived in rectangular Cartesian coordinates for a two dimensional problem.

All the physical properties of the semiconductor are supposed to vary exponentially with distance. The analytical solution is procured by employing normal mode technique on the resulting non-dimensional coupled field equations with appropriate boundary conditions.

For the mechanically loaded thermally insulated surface, normal displacement, stress components, temperature distribution and carrier density are calculated numerically with the help of MATLAB software for a silicon semiconductor and displayed graphically. Some particular cases of interest have also been deduced from the present results.

The effects of rotation and non-homogeneity on the different physical fields are investigated on the basis of analytical and numerical results. Comparisons are made with the results predicted by GL theory in the presence and absence of gravity for different values of time. Comparisons are also made between the three theories in the presence of rotation, gravity and in-homogeneity. Such problems are very important in many dynamical systems.

The purpose is to explore the free vibration behaviour of elastic foundation-supported porous functionally graded nanoplates using the Rayleigh-Ritz approach. The goal of this study is to gain a better knowledge of the dynamic response of nanoscale structures made of functionally graded materials and porous features. The Rayleigh-Ritz approach is used in this study to generate realistic mathematical models that take elastic foundation support into account. This research can contribute to the design and optimization of advanced nanomaterials with potential applications in engineering and technology by providing insights into the influence of material composition, porosity and foundation support on the vibrational properties of nanoplates.

A systematic methodology is proposed to evaluate the free vibration characteristics of elastic foundation-supported porous functionally graded nanoplates using the Rayleigh-Ritz approach. The study began by developing the mathematical model, adding material properties and establishing governing equations using the Rayleigh-Ritz approach. Numerical approaches to solve the problem are used, using finite element methods. The results are compared to current solutions or experimental data to validate the process. The results are also analysed, keeping the influence of factors on vibration characteristics in mind. The findings are summarized and avenues for future research are suggested, ensuring a robust investigation within the constraints.

The Rayleigh-Ritz technique is used to investigate the free vibration properties of elastic foundation-supported porous functionally graded nanoplates. The findings show that differences in material composition, porosity and foundation support have a significant impact on the vibrational behaviour of nanoplates. The Rayleigh-Ritz approach is good at modelling and predicting these properties. Furthermore, the study emphasizes the possibility of customizing nanoplate qualities to optimize certain vibrational responses, providing useful insights for engineering applications. These findings expand understanding of dynamic behaviours in nanoscale structures, making it easier to build innovative materials with specific features for a wide range of industrial applications.

The novel aspect of this research is the incorporation of elastic foundation support, porous structures and functionally graded materials into the setting of nanoplate free vibrations, utilizing the Rayleigh-Ritz technique. Few research have looked into this complex combo. By tackling complicated interactions, the research pushes boundaries, providing a unique insight into the dynamic behaviour of nanoscale objects. This novel approach allows for a better understanding of the interconnected effects of material composition, porosity and foundation support on free vibrations, paving the way for the development of tailored nanomaterials with specific vibrational properties for advanced engineering and technology applications.