Search results

A dynamical two‐dimensional problem of a homogeneous transversely isotropic fibre‐reinforced generalized thermoelastic solid with an overlying acoustic fluid layer has been considered to investigate disturbance due to mechanical load. Laplace and Fourier transform techniques are applied to solve the problem. Uniformly distributed and linearly distributed forces are applied to illustrate the utility of the approach. A numerical inversion technique has been applied to obtain the solution in the physical domain. Numerical results are obtained and presented graphically to show the effect of anisotropy along with the comparison of homogeneous transversely isotropic fibre‐reinforced generalized thermoelastic solid and isotropic elastic solid.

The purpose of this paper is to study the analytical solutions of transversely isotropic thermo-piezoelectric interactions in a polygonal cross-sectional fiber immersed in fluid using the Fourier expansion collocation method.

A mathematical model is developed for the analytical study on a transversely isotropic thermo-piezoelectric polygonal cross-sectional fiber immersed in fluid using a linear form of three-dimensional piezothermoelasticity theories. After developing the formal solution of the mathematical model consisting of partial differential equations, the frequency equations have been analyzed numerically by using the Fourier expansion collocation method (FECM) at the irregular boundary surfaces of the polygonal cross-sectional fiber. The roots of the frequency equation are obtained by using the secant method, applicable for complex roots.

From the literature survey, it is evident that the analytical formulation of thermo-piezoelectric interactions in a polygonal cross-sectional fiber contact with fluid is not discussed by any researchers. Also, in this study, a polygonal cross-section is used instead of the traditional circular cross-sections. So, the analytical solutions of transversely isotropic thermo-piezoelectric interactions in a polygonal cross-sectional fiber immersed in fluid are studied using the FECM. The dispersion curves for non-dimensional frequency, phase velocity and attenuation coefficient are presented graphically for lead zirconate titanate (PZT-5A) material. The present analytical method obtained by the FECM is compared with the finite element method which shows a good agreement with present study.

This paper contributes the analytical model to find the solution of transversely isotropic thermo-piezoelectric interactions in a polygonal cross-sectional fiber immersed in fluid. The dispersion curves of the non-dimensional frequency, phase velocity and attenuation coefficient are more prominent in flexural modes. Also, the surrounding fluid on the various considered wave characteristics is more significant and dispersive in the hexagonal cross-sections. The aspect ratio (a/b) of polygonal cross-sections is critical to industry or other fields which require more flexibility in design of materials with arbitrary cross-sections.

This study aims to analyse the behaviour of plane waves within a nonlocal transversely isotropic visco-thermoelastic medium having variable thermal conductivity.

The concept of enunciation is used in the generalized theory of thermoelasticity in accordance with the Green–Lindsay and Eringen’s nonlocal elasticity models. The linear viscoelasticity model developed by Kelvin–Voigt is used to characterize the viscoelastic properties of transversely isotropic materials.

It has been noticed that three plane waves, which are coupled together, travel through the medium at three different speeds. The derivation of reflection coefficients and energy ratios for reflected waves is carried out by incorporating suitable boundary conditions. Numerical computations are performed for the amplitude ratios, phase speeds and energy partition and displayed in graphical form.

The outcomes of the numerical simulation demonstrate that the amplitude ratios are significantly influenced by variable thermal conductivity, nonlocal parameters and viscosity. It is further observed from the plots that the phase speeds in a transversely isotropic medium depend on the angle of incidence. In addition, it has been established that the energy is preserved during the reflection phenomenon.

The purpose of the current manuscript is to investigate the reflection of plane waves in a rotating, two-dimensional homogeneous, initially stressed, nonlocal orthotropic thermoelastic solid half-space based on dual-phase-lag model.

The reflection phenomenon has been utilized to study the effects of initial stress, rotation and nonlocal parameter on the amplitude ratios. During the reflection phenomenon three coupled waves, namely quasi displacement primary wave (qP), quasi thermal wave (qT) and quasi displacement secondary wave (qSV) have been observed in the medium, propagating with distinct velocities. After imposing the suitable boundary conditions, amplitude and energy ratios of the reflected waves are obtained in explicit form.

With the support of MATLAB programming, the amplitude ratios and energy ratios are plotted graphically to display the effects of rotation, initial stress and nonlocal parameters. Moreover, the impact of anisotropy and phase lags is also observed on the reflection coefficients of the propagating waves.

In the current work, we have considered rotation and nonlocality parameters in an initially stressed orthotropic thermoelastic half-space, which is lacking in the published literature in this field. The introduction of these parameters in a nonlocal orthotropic thermoelastic medium provides a more realistic model for these studies. The present work is valuable for the analysis of orthotropic thermoelastic problems involving rotation, initial stress and nonlocality parameters.

The present investigation is concerned with the two-dimensional deformations in an inhomogeneous fiber-reinforced thermoelastic medium under the influence of gravity in the context of Green–Lindsay theory.

Material properties are supposed to be graded in x-direction, and normal mode technique is adopted to obtain the exact expressions for the temperature field, displacement components and stresses.

Numerical computations have been carried out with the help of MATLAB software, and the results are depicted graphically to observe the disturbances induced in the considered medium. Comparisons made within the theory of the physical quantities are shown in figures to highlight the effects of fiber reinforcement, inhomogeneity parameter, gravity and time.

In the present work, we have investigated the effects of fiber reinforcement, inhomogeneity parameter, gravity and time in an inhomogeneous, fiber-reinforced thermoelastic medium under the influence of gravity. Although various investigations do exist to observe the disturbances in a thermoelastic medium under the effects of different parameters, the work in its present form i.e. thermally induced vibrations in an inhomogeneous fiber-reinforced thermoelastic material with gravity has not been studied till now. The present work is useful and valuable for analysis of problems involving thermal shock, gravity parameter, fiber reinforcement, inhomogeneous and elastic deformation.

The purpose of this paper is to investigate the influences of fractional order, hydrostatic initial stress and gravity field on the plane waves in a linearly fiber-reinforced isotropic thermoelastic medium.

The problem has been solved analytically and numerically by using the normal mode analysis.

Numerical results for the temperature, the displacement components and the stress components are presented graphically and analyzed the results. The graphical results indicate that the effect of fractional order, hydrostatic initial stress and gravity field on the plane waves in the fiber-reinforced thermoelastic medium are very pronounced. Comparisons are made with the results in the absence and presence of hydrostatic initial stress and gravity field.

In the present work, the authors shall formulate a fiber-reinforced two-dimensional problem under the effect of fractional order, hydrostatic initial stress, and gravity field. The normal mode analysis is used to obtain the exact expression for the temperature, displacement components, and stress components. A comparison is also made between the three theories in the absence and presence of gravity field. Such problems are very important in many dynamical systems.

The purpose of this paper is to investigate the existence of SH-waves in fiber-reinforced layer placed over a heterogeneous elastic half-space.

The heterogeneity of the elastic half-space is caused by the exponential variations of density and rigidity. As a special case when both the layers are homogeneous, the derived equation is in agreement with the general equation of Love wave.

Numerically, it is observed that the velocity of SH-waves decreases with the increase of heterogeneity and reinforced parameters. The dimensionless phase velocity of SH-waves increases with the decreases of dimensionless wave number and shown through figures.

In this work, SH-wave in a fiber-reinforced anisotropic medium overlying a heterogeneous gravitational half-space has been investigated analytically and numerically. The dispersion equation for the propagation of SH-waves has been observed in terms of Whittaker function and its derivative of second degree order. It has been observed that on the removal of heterogeneity of half-space, and reinforced parameters of the layer, the derived dispersion equation reduces to Love wave dispersion equation thereby validates the solution of the problem. The equation of propagation of Love wave in fiber-reinforced medium over a heterogeneous half-space given by relevant authors is also reduced from the obtained dispersion relation under the considered geometry.

The purpose of this study is to analyze the thermo-diffusion process in a semi-infinite nonlocal fiber-reinforced double porous thermoelastic diffusive material with voids (FRDPTDMWV) in light of the fractional-order Lord–Shulman thermo-elasto-diffusion (LSTED) model. By virtue of Eringen’s nonlocal elasticity theory, the governing equations for the considered material are developed. The free surface of the substrate is governed by the inclined mechanical load and thermal and chemical shocks.

With the aid of the normal mode technique, the solutions of the nondimensional coupled governing equations have been obtained.

The expressions of field variables are obtained analytically. By using MATHEMATICA software, various graphical implementations are presented to describe the impacts of angle of inclination, fractional-order and nonlocality parameters. The present model is also validated on the basis of some comparative studies with some preestablished cases.

As observed from the literature survey, many different studies have been carried out by taking into account the deformation analysis in nonlocal double porous thermoelastic material structures and thermo-mechanical interaction in fiber-reinforced medium under fractional-order thermoelasticity theories. However, to the best of the authors’ knowledge, no research emphasizing the thermo-elasto-diffusive interactions in a nonlocal FRDPTDMWV has been carried out. Moreover, the effect of fractional-order LSTED theory on fiber-reinforced thermoelastic diffusive half-space with double porosity has not been illuminated till now, which significantly defines the novelty of the conducted research.

This paper gives a bibliographical review of the finite element modelling and simulation of indentation testing from the theoretical as well as practical points of view. The bibliography lists references to papers, conference proceedings and theses/dissertations that were published between 1990 and 2002. At the end of this paper, 509 references are listed dealing with subjects such as, fundamental relations and modelling in indentation testing, identification of mechanical properties for specific materials, fracture mechanics problems in indentation, scaling relationship for indentation, indenter geometry and indentation testing.

The purpose is to analyze the mechanical behavior of the arterial wall in the degraded region of the arterial wall and to determine the stress distribution, as an important factor for predicting the potential failure mechanisms in the wall. In fact, while the collagen fiber degradation process itself is not modeled, zones with reduced collagen fiber content (corresponding to the degradation process) are assumed. To do so, a local weakness in the media layer is considered by defining representative volume elements (RVEs) with different fiber collagen contents in the degraded area to investigate the mechanical response of the arterial wall.

A three-dimensional (3D) large strain hierarchical multiscale technique, based on the homogenization and genetic algorithm (GA), is utilized to numerically model collagen fiber degradation in a typical artery. Determination of material constants for the ground matrix and collagen fibers in the microscale level is performed by the GA. In order to investigate the mechanical degradation, two types of RVEs with different collagen contents in fibers are considered. Each RVE is divided into two parts of noncollagenous matrix and collagen fiber, and the part of collagen fiber is further divided into matrix and collagen fibrils.

The von Mises stress distributions on the inner and outer surfaces of the artery and the influence of collagen fiber degradation on thinning of the arterial wall in the degraded area are thoroughly studied. Comparing the maximum stress values on outer and inner surfaces in the degraded region shows that the inner surface is under higher stress states, which makes it more prone to failure. Furthermore, due to the weakness of the artery in the degraded area, it is concluded that the collagen fiber degradation considerably reduces the wall thickness in the degraded area, leading to an observable local inflation across the degraded artery.

Considering that little attention has been paid to multiscale numerical modeling of collagen fiber degradation, in this paper a 3D large strain hierarchical multiscale technique based on homogenization and GA methods is presented. Therefore, while the collagen fiber degradation process itself is not modeled in this study, zones with reduced collagen fiber content (corresponding to the degradation process) are assumed.